1 MHz to 6 GHz Wideband High Linearity Active Mixer
The LTC5510 from Linear Technologies is a is a high linearity active mixer mixer optimized for wideband applications between 1 MHz and 6 GHz. This double balanced active mixer has a low distortion, low LO leakage and is optimized to use with 1:1 transmission line baluns. It has an OIP3 of 27 dBm, Conversion Gain of 1.5 dB, Noise figure below 11.6 dB and requires a supply voltage of 3.3 or 5 V. The LTC5510 is packaged in a 16 lead 4 x 4 mm QFN package and can be used for both up-conversion and down-conversion applications.
Plug In Mixer for VHF, Defense & Fedral Communication Applications
The SBL-1 from Mini Circuits is a Mixer from Mini Circuits with a RF/IF Frequency from 0 to 500 MHz and a LO Frequency of 0 to 1 MHz. It has a LO power of up to 7 dBm, a conversion loss from 5.6 to 8 dB and a LO/RF Isolation of 45 dB. The mixer is available in a plug-in configuration and is ideal for VHF, defense & federal communications.
Double Balanced Mixer with IF from DC to 8 GHz, RF/LO from 7 to 32 GHz
The ML1-0732 is a Microlithic double balanced mixer that operates with a RF/LO Frequency from 7 to 32 GHz and an IF Frequency from DC to 8 GHz. The mixer has a a P1dB from 3 to 9 dBm, a conversion loss of 8-11 dB an Isolation (L-R) of 42 dB and Isolation (L-I) of 25 dB through the band. It is available as a wire bondable chip (0.152" x 0.090" x 0.015") or an SMA connectorized package. The ML1-0732 is an excellent alternative to Marki Microwave M9 mixers packaged in drop-in carriers such as the ES carrier.
500 kHz to 3 GHz Surface Mount Broadband Balun
The BAL-0003SM is a 500 kHz to 6 GHz Balanced to Unbalanced Transformer Balun. It is matched to 50 Ohms on the input and output ports. It can be used in Analog to Digital Converters, Balanced Receivers, Baseband Digital Modulation and Signal Integrity testing.
Broadband Surface Mount Balun/Transformer from 500 kHz to 9 GHz
The BAL-0009SMG from Marki Microwave is a broadband surface mount balun/transformer that operates from 500 kHz to 9 GHz. The Balun is tuned for optimal phase/amplitude balance and transforms a 50 Ohm input to a 100 Ohm differential (50 Ohm Single) output. It is ideal for Analog to digital converters, balanced receivers, baseband digital modulation and signal integrity applications. It is available in a compact SMT .320" x .320" x .120" package.
50 Ohm DC Block SMA Male To SMA Female 10 MHz - 18 GHz
The PE8210 from Pasternack Enterprises Inc is a 50 Ohm, In Series DC Block that operates from 10 MHz to 18 GHz. It has a breakdown voltage of 200 Vrms, an insertion loss of 0.5 dB and a VSWR of 1.35:1. It has SMA Male to SMA Female Connectors which are both MIL-STD-348 Certified.
DC to 3 GHz, 3 to 20 dB Fixed Attenuator
The 75FP-XXX-3G from JFW Industries is a Fixed Attenuator which operates from DC to 3 GHz. It is available in various options with an attenuation of 3 to 20 dB and can handle up to 100 W of power. It has F-type and N-type connectors.
DC to 2000 MHz, 70 dB Variable Step Attenuator
The 680-70-1 is a variable step attenuator from MECA that operates from DC to 2 GHz. It has a total attenuation of 70 dB with a 1 dB Step. It can be controlled manually by a rotary knob. This attenuator can handle up to 2 W (Average Power) and up to 1000 W Peak Power. It is available in a connectorized module with N Type – Female connectors.
5 to 18GHz, Analog Phase Shifter with Capability for Phase Shifting from 0 to 400 Degrees
The PS-5G18G-400-A-SFF is a 5 to 18 GHz, Analog Phase Shifter with the capability for Phase Shifting from 0 to 400 Degrees. It has an Impedance of 50 Ohms, an insertion loss of 4 to 8 dB, VSWR of 2.3:1 and a phase voltage sensitivity of 40 Degrees. The phase shifter can accept a max RF power of 30 dBm CW and has a single positive control voltage from 0 to 10 V. It is available in a connectorized module with SMA Connectors.
DC to 18 GHz, SMA-Male, 1 W, Termination
The ST1813 from Fairview Microwave is SMA Male Termination, that can handle upt to 1 W (Avg), 250 W (Peak) of power from DC to 18 GHz. It has an impedance of 50 Ohms and VSWR of 1.04:1 at 4 GHz, 1.15:1 at 18 GHz. The termination can operate at a temperature from -55 to 125 Degrees C. It has a stainless steel body, with a gold plated center contact which is MIL-G-45204 certified.
10 MHz to 10 GHz Compact, Wideband Bias Tee
The TCBT-14 from Mini Circuits is a compact wideband bias tee that measures 3.8 x 3.8 mm and operates from 10 MHz to 10 GHz without resonances that are typically observed over wide bandwidths. It has a low insertion loss and can handle 1 W of RF power and 200 mA of current. It is designed for pick and place operation.
SMA Male to SMA Male In-Series Coaxial Adapter
The ADP 3000-301 from VidaRF is a SMA Male-Male In Series Coaxial Adapter. VidaRF provides a large range of both In Series and Between Series adapters. They have adapters available off the shelf and also provide custom solutions based on the required specification.
75 to 150 MHz, Linear Tuning, Wideband VCO
The POS-150 is a linear tuning VCO that operates from 75 to 150 MHz with a power of 9.5 dBm, a tuning voltage of 1 to 16 V with tuning sensitivity of 5.8 MHz/V. The VCO requires a 12 V supply and has an excellent harmonic suppression of -23 dBc. It is hermetically sealed making it is ideal for use in test equipment and signal generators.
Also See:
Most Popular Amplifiers, Transistors and Front End Modules in 2013
Top 10 Test & Measurement Products in 2013
