RF Interconnect solutions are from the leading manufacturers are listed on everything RF. We have compiled a list of trending cable & connector products on everything RF in April, 2023. For more cable & connector products, visit the connectors & cables Hub on everything RF.
Flexible Microwave Cable Assembly from DC to 26.5 GHz
The SUCOFLEX 526S from Huber+Suhner is a Flexible Microwave Cable Assembly that operates from DC to 26.5 GHz. It is a cost-effective durable cable assembly that has been developed for reliable test applications. The cable assembly has an outer diameter of 7.7 mm and a minimum bend radius (static) of 25.4 mm. It has a signal delay of 4.3 ns/m and a velocity of signal propagation of 77%. The assembly has an insertion loss of 1.63 dB/m and a capacitance of 87 pF/m. It has a copper (silver-plated) center conductor, PTFE (Polytetrafluoroethylene) dielectric, copper (silver-plated) outer conductor, steel armour and FEP jacket. It has an operating temperature range from -55°C to +165°C. Read more
67 GHz Phase Stable Coaxial Cable Assembly
The MWX161 from Junkosha is a Phase Stable Coaxial Cable Assembly that operates from DC to 67 GHz. It has a standard insertion loss of 3.5 dB/m (at 18.5 GHz) and 7.3 dB/m (at 67 GHz). The cable assembly has an outer diameter of 6.5 mm and is available in lengths from 600 to 1500 mm. It has slim armor with an Aramid sheath and an operating temperature range from -65 to +125°C. This cable assembly is ideal for use in microwave band measurements requiring a wide temperature range (device assessment, etc.), testing equipment requiring durability, and multiport vector network analyzer applications. Read more
90 GHz Phase Stable, Customizable Flexible RF Cable Assembly
The A33TFL from Conduct RF is a Flexible RF Cable Assembly that operates up to 90 GHz. It has an outer diameter of 0.056 inches and a minimum bend radius of 0.20 inches. This cable assembly utilizes a dielectric material that eliminates the PTFE knee phenomenon and provides a more linear change in phase with change in temperature. It exhibits an attenuation of 3.00 dB/ft (at 50 GHz) and provides shielding effectiveness of more than 100 dB. It has a delay of 1.45 ns and a velocity of propagation of 70%. The A33TFL is available in customizable lengths with SMA, N-type, TNC, 2.92 mm, SMP, SMPM, and SMPS corrosion-resistant connector options. Read more
Vapor-Sealed Cable Assemblies for Aerospace Applications up to 40 GHz
The GORE-FLIGHT from W. L. Gore & Associates are Microwave Assemblies that operate up to 40 GHz. These rugged assemblies have been designed for airborne electronic surveillance/counter measures, radar warning systems, navigation/communication systems, and electronic/signal intelligence applications. They are tested for vapor leakage, dielectric withstanding voltage, VSWR, insertion loss, impedance, and velocity of propagation. The cables are constructed using fluoropolymers to reduce abrasion caused by routing during installation and help maintain stable performance by resisting the effects of vibration and temperature changes during flight. Read more
20 GHz Quad Row, High-Density Cable Assembly System for Test Applications
The BQRA from Samtec is a high-density cable assembly array that operates up to 20 GHz. One end of the assembly terminates in a 4 row array with 20 connection interfaces. The other end has 2.92 mm connectors. It has 20 AWG solid dielectric low-loss microwave cables with 10 phase matched pairs. This assembly is part of Samtec's Bulls Eye® series that are ideal for high-performance test applications. They are available in lengths from 100 to 999 mm with 2.92 mm Straight Jack/Plug connectors. Read more
2.4mm Male to 2.4mm Male Flexible Cable Assemblies from DC to 50 GHz
The Littlebend™ HLB098-24P-24P-L from Hasco are Flexible Coaxial Cable Assemblies that operate from DC to 50 GHz. They are extremely flexible and are designed for demanding microwave interconnect applications and system designs requiring dense packaging. These cable assemblies have a minimum bend radius of 5 mm (static) and 10 mm (repeated). They have a dielectric withstanding voltage of 750 V and can handle up to 100 W of power. The cable assemblies have a silver-plated solid Copper center conductor, low-density PTFE dielectric, and an FEP cable jacket with an operating temperature range from -55°C to +125°C. Read more
High-Performance, Flexible VNA Test Cables from DC to 40 / 50 / 67 GHz
The TuffTest™ from San-tron are VNA Test Cables that operate from DC to 67 GHz (40/50/67 GHz). They are high-performance microwave cables protected by a wound stainless steel armor casing and an abrasion-resistant outer sheath. These cables offer high flexibility, crush, and torque resistance with virtually no cable spring back. They feature several layers of shielding which include a PTFE outer jacket, an FEP inner jacket and a PTFE dielectric. These test cables have an outer diameter of 0.183/0.236 inches and a minimum bend radius of 2.36 inches. They have an amplitude stability with a flexure of ±0.10 dB and a phase stability with a flexure of ±9°. Read more
SMA to SMP Flexible Cable Assemblies from DC to 18 GHz
The SMA to SMP Cable Assemblies from Amphenol RF operate from DC to 18 GHz. They have a maximum voltage rating of 170 V (RMS) and a dielectric voltage rating of up to 1000 V (RMS). These cable assemblies use the Tflex 405 cables from Amphenol Times Microwave Systems which have a VSWR of less than 1.20:1. They are available in various lengths from 12 to 196.85 inches. Read more
90 GHz, 112/224 Gbps In-Line 4/8 Channel Solderless Multi-coax Connector
The TR90 from Ardent Concepts is a Multicoax Connector that operates in the E-band up to 90 GHz. It is based on Amphenol Ardent’s TR Multicoax Series that are available in 20/40/70 GHz configurations and is designed for carrying high-speed analog or digital signals up to 112/224 Gbps. This connector utilizes Ardent’s RC Spring Probe™ solderless compliant contact technology for high-performing and mechanical reliability. It can be securely mated to printed circuit boards with two screws to ensure signal fidelity. Compared to traditional solder-down coaxial connectors, TR90 Multicoax can reduce connector real estate on printed circuit boards by up to 80% and is easily reusable as it can be moved from position to position without the need for any surface mount components. Read more
Flexible Coaxial Cables from DC to 67 GHz
The Phase3™ from MegaPhase are Flexible Coaxial Cables that operate from DC to 67 GHz. They have a dielectric withstanding voltage of up to 15 kV (at 60 GHz) and provide a shielding effectiveness of better than 110 dB. These 50-ohm cables have a minimum static bend radius of 1.3 cm, an outer diameter of less than 0.787 cm and capacitance of 78.7 pF/m. Read more
High Flexibility Coaxial Cable from DC to 3 GHz with SMA Connectors
The XtendedFlex™ 178 from Times Microwave Systems is a High Flexibility Coaxial Cable that operates from DC to 3 GHz. It has an innovative design and a unique material composition to ensure consistent performance under millions of flexures and is suitable for applications that require constant cable motion and flexibility. This cable has an outer diameter of 3.12 mm and a minimum bend radius of 16.9 mm. Read more
79 GHz Phase Stable Semi-Rigid Cables
The EZ-PT86 Series from EZ Form Cable are Phase Stable Semi-Rigid Cables that operate up to 79 GHz. They are developed for RF applications where minimal phase change over temperature is required. These cables have a minimum bend radius of 0.25 inches, an inner conductor diameter of 0.0226 inches, dielectric diameter of 0.065 inches and outer conductor diameter of 0.086 inches. They have a velocity of propagation of 81%, a dielectric constant of 1.47 and can withstand a voltage of 5,000 V (RMS). Read more
Phase and Amplitude Stable Flexible Coaxial Cables from DC to 50 GHz
The Littlebend™ HLB098 Series from HASCO Components are Flexible Coaxial Cables that operates from DC to 50 GHz. They are extremely flexible and are designed for demanding microwave interconnect applications and system designs requiring dense packaging. These cables can replace Right Angle connectors with minimal performance degradation due to their tight bend radius. The cables have an outer diameter of 0.098 inches, a minimum bend radius of 5 mm (static), and 10 mm (repeated). Read more
25 GHz mmWave Flex-to-Board PCB Headers for 5G Applications
The 2188770062 from Molex are mmWave Flex-to-Board PCB Headers that have been designed to support frequency signals up to 25 GHz. They can handle a current of up to 1.0 A per contact and has a dielectric withstanding voltage of 250 V (AC). These board connectors can withstand up to 10 mating cycles and enable the high-speed transfer of RF signals while offering space savings and mechanical robustness. They also offer full EMI shielding and high-frequency capability for superior EMI reduction and signal integrity (SI) performance, while supporting mating positioning. They ensure protection against potential RF contact buckling and shock caused by accidental drops. Read more
Thread Mount TNC Connectors from DC to 11 GHz
The TNC Series from Delta Electronics are TNC Connectors that operate from DC to 11 GHz. These 50-ohm connectors are available in various configurations and have 7/16-28 threaded coupling (similar in size to BNC connectors, but with better electrical characteristics). They are best suited for use with cables in the range of .150" to .250" diameter but are available for flexible and semi-rigid cables from .085" to over .75" diameter. These connectors are available in multiple configurations and geometries. Read more
65 GHz Solder-on PCB Edge Launch and Surface Mount Connectors
The Solder-on PCB Edge Launch and Surface Mount Connectors from SV Microwave are a series of connectors that operate up to 65 GHz. They feature a new body style design and are available in SMA, 2.92mm, 2.4mm and 1.85mm connector interfaces. These 50-ohm connectors provide a shielding effectiveness of more than 90 dB and have a dielectric withstanding voltage of 500 V (RMS). Read more
1.85 mm Coaxial Connectors in Various Mounting Options
The 148-0701-XXX Series from Cinch Connectivity Solutions are 1.85 mm Coaxial Connectors that operate up to 67 GHz. These 50-ohm connectors are available in end launch, low profile, vertical launch, PCB mount and 2/4-hole flange mount configurations. They have a dielectric withstanding voltage of 500 V (RMS) and an operating temperature range from -55°C to +125° C. Read more
Between Series 1.35 mm Jack (female) to 1.0 mm Jack (female) Adapter
The 222410-00SF from Southwest Microwave is a Between Series 1.35 mm Jack (female) to 1.0 mm Jack (female) adapter. It has a passivated steel housing and BeCu contact. This adapter is available in a hexagonal package that measures 14.4 x 8.0 mm. Read more
SWD RF Switch Connector from DC to 6 GHz for Direct PCB Attachment
The CONSWD001-SMD from Linx Technologies is an SWD RF Switch Connector that operates from DC to 6 GHz. It can handle an input power of 2 W and can withstand a dielectric voltage of 300 V (RMS). This connector provides an isolation of more than 56 dB and has an insertion loss of less than 1.5 dB. It has a steel center contact and supports direct PCB attachment and reflow- or hand-solder assembly. The connector is available in a surface-mount compact Nickel-plated copper-alloy housing that measures 3.00 x 3.00 x 1.75 mm and is ideal for quality assurance, test, and measurement, Internet of Things (IoT) devices, Wi-Fi/WLAN/802.11, cellular IoT: LTE-M (Cat-M1) and NB-IoT, LoRaWAN ITU-T Y.4480, Sigfox, Bluetooth, ZigBee, low-power wide-area (LPWA) and ISM applications. Read more
Click here to view Connectors and Cables Hub on everything RF.
