everything RF has compiled a list of trending 5G Products on everything RF in 2024. 5G products consist of a wide range of devices and components designed to facilitate the implementation and operation of 5G networks. These products collectively form the backbone of 5G technology, facilitating the efficient transmission and reception of high-speed data in 5G networks and devices. Visit the 5G Hub on everything RF to keep up to date with the 5G Industry.
Sub-6 GHz 5G/4G/3G Module for Global Coverage
The FM350-GL from Fibocom is a Sub-6 GHz 5G/4G/3G Module that provides global mobile network coverage. It delivers a downlink data rate of up to 4.67 Gbps and a maximum uplink data rate of 1.25 Gbps. This module delivers a Tx power of 23.5 dBm and has an Rx sensitivity of up to -102 dBm. It has a built-in eSIM and Assisted-GNSS (A-GNSS) that supports GPS, GLONASS, BeiDou, Galileo, and QZSS constellations. Read more.
Low-Power LTE IoT Modem from 700 MHz to 2.6 GHz
The QCX216 from Qualcomm is an LTE IoT Modem that operates from 700 MHz to 2.6 GHz. It delivers a peak download data rate of 10 Mbps and a peak upload data rate of 5 Mbps. This modem is based on a 204 MHz Arm Cortex Dual core M3 CPU and has an integrated LTE modem and RF transceiver. It is Global LTE Cat1.bis IoT-optimized and compliant with 3GPP Release 14 LTE specifications. This modem supports dual SIM or eSIM and has a 2.4 GHz Wi-Fi receiver for indoor position location with Wi-Fi scanning capability using a shared RX with LTE. Read more.
5 GHz Integrated Front-End Module for Wi-Fi 7 Applications
The SKY85797-11 from Skyworks Solutions is a 5 GHz Wi-Fi 7 (802.11be) Front-End Module (FEM). It consists of a transmit/receive switch, a high-gain low noise amplifier (LNA) with bypass, a power amplifier (PA), a logarithmic power detector, and a coupler. This front-end module has fully-matched input and output ports within the module. It delivers an output power of +25 dBm with a gain of 33 dB (Tx) and 16 dB (Rx) in the 5 GHz band. This FEM is ideal for Wi-Fi-based home entertainment/video streaming systems, home gateways, customer, premise equipment (CPE), mesh/whole-home Wi-Fi systems, and indoor/outdoor access point applications. Read more.
Mixed Signal Front-End with Integrated 16-Bit DAC and 12-Bit ADC
The AD9084 from Analog Devices is a highly integrated Mixed Signal Front-End. It has a 16-bit RF digital-to-analog converter (DAC) core with a maximum sample rate of 28 GSPS and a 12-bit RF analog-to-digital converter (ADC) core with a maximum sample rate of 20 GSPS. This front end supports four transmit channels and four receive channels and includes a bypass mode that allows the full bandwidth capability of the ADC and/or DAC cores to bypass the DSP data paths. It is suitable for applications requiring both wideband ADCs and DACs to process signal(s) having wide instantaneous bandwidth. Read more.
Dual-Channel 5G NR Transceiver IC for 5G FR1/FR2 Bands
The FBD01Q from Millibeam is a Dual-Channel 5G NR Transceiver IC that operates in the 5G FR1 Band from 3.1 to 4.2 GHz (n77 Band) and 5G FR2 Band from 26.5 to 29.5 GHz (n257 Band). This transceiver consists of two transmit and receive channels and has a total RF bandwidth of over 3.9 GHz. It can be integrated into base stations or FWA devices to perform beamforming with high EIRP power and eliminates the need for expensive high-gain antenna arrays or a high number of Tx/Rx elements requiring power-intensive and expensive calibration. Read more.
5G Omnidirectional Dipole Antenna from 600 to 6000 MHz
The YECT005W1A from Quectel is a 5G Dipole Antenna that operates from 600 to 6000 MHz. This linearly-polarized antenna has been designed to provide broadband coverage in the operating frequency band but also offers backward compatibility to support 2G, 3G, and 4G networks, along with LTE Cat M and NB-IoT. It provides a peak gain of up to 4.6 dBi and an efficiency of 70.7%. This omnidirectional antenna is ideal for applications where the antenna has to be discrete, low-profile, and easy to install. It can work with various ground plane sizes or in free space for easy integration. Read more.
Fully-Integrated V2X SoC for Day 1 and Future Day 2 Applications
The TEKTON3 from Autotalks is a V2X SoC that is designed for Day 1 and future Day 2 use cases. It has embedded Day 1 and Day 2 radios operating concurrently with both radios using two antennas with full transmit and receive diversity. The Day 1 radio supports either LTE-V2X (C-V2X Rel. 14/15) or DSRC and the Day 2 radio supports either 5G-V2X (C-V2X Rel. 16/17/18) or DSRC+ (IEEE802.11bd). The Day 2 radio is used for cooperative perception, which means that a vehicle can ‘see’ what the other vehicle is ‘seeing’. This enables two vehicles to share the information they receive and have even better road awareness. Read more.
Sub-6 GHz 5G/LTE-Advanced Module with L1-Band GNSS Support
The FE990B34/40 from Telit Cinterion is a Sub-6 GHz 5G/LTE-Advanced Module. It supports 5G sub-6 GHz technology with Gigabit LTE and WCDMA and includes a state-of-the-art multi-constellation GNSS receiver. This module leverages Qualcomm® Snapdragon® X72 5G Modem-RF System and is compliant with 3GPP 5G Release-17 5G deployments. It supports non-standalone (NSA) LTE/5G NR dual connectivity (EN-DC), full 5G NR standalone (SA) mode, Dynamic spectrum sharing (DSS) between LTE and 5G and Network Slicing. This module is available in two regional variants (EMEA and North America) with 5G sub-6 GHz FDD and TDD bands. Read more.
5G Modules with 4G/3G/2G Fallback for Automotive Applications
The RN93xx and RN95xx from Rolling Wireless are 5G Modules with 4G (LTE Cat19)/3G/2G fallback designed for automotive applications. They provide a host of enhancements to automotive applications, including support for 5G Release-16, a high-performance multicore application processor, an integrated hardware engine for security features, and ASIL safety support. The modules have a quad-core ARM Cortex A55 application processor with dedicated Flash and RAM running Legato® for enhanced security. They include a large set of security features like Secure Boot, Secure Storage, Integrity checks, and Access control and are UN-ECE WP29 ready. Read more.
SP4T Switch from 10 MHz to 8 GHz for 5G mMIMO Applications
The PE42447 from pSemi is an SP4T RF Switch that operates from 10 MHz to 8 GHz. It has an insertion loss of less than 0.5 dB with an IIP3 of 85 dBm. This switch can handle an input power of 100 W and has a switching time of 1 microsecond. It is manufactured on pSemi’s patented UltraCMOS process and the combination of high-power handling, high linearity, and extremely low insertion loss makes this switch suitable for hybrid beamforming in wireless infrastructure. Read more.
3GPP Rel-17 Based 5G RedCap IoT Module with GNSS Support
The CQM220 from Cavli Wireless is a 5G RedCap Module compatible with the 3GPP Rel-17 standards for IoT and M2M applications. It delivers a data rate of up to 226 Mbps (downlink) and 121 Mbps (uplink). This module has integrated GNSS support and an optional integrated eSIM providing global connectivity via the Cavli Hubble Device and Connectivity management platform. It comes with Linux-based OpenSDK, ensuring application-level coding for specific without requiring an external host MCU. Read more.
5G-NR Sub-6 GHz Cellular Module for Global Connectivity
The EM9291 from Sierra Wireless is a 5G-NR Sub-6 GHz Cellular Module with 4G LTE and 3G fallback support. It delivers a peak download data rate of 4.9 Gbps and an upload data rate of 660 Mbps. This module has an embedded SIM for simplified & flexible IoT deployments with onboard carrier profile, M2M eUICC, and consumer eUICC. It supports Dual SIM Single Standby (DSSS) to switch between networks quickly and stay connected. The module has an integrated GNSS receiver that supports GPS, GLONASS, BeiDou, and Galileo satellite systems. It has global industry and mobile network certifications. Read more.
64T64R MIMO 5G Backhaul Radio from 3.55 to 3.7 GHz
The 64TR mMIMO from AmpliTech Group True G Speed Services (AGTGSS) is a Backhaul Radio that operates from 3.55 to 3.7 GHz. It has a bandwidth of up to 100 MHz and supports QPSK and 16/64/256 QAM modulation schemes. This radio supports TDD duplex mode and 64T64R MIMO. It is a “plug-n-play” solution for P5G and local carriers and offers benefits such as rapid deployment, flexibility, cost-effectiveness, localized high-speed connectivity, enhanced security, and interoperability. The radio is 3GPP Rel-15 compliant with upgradability to Rel-16 and is also O-RAN compliant. Read more.
Low Noise Amplifier from 3 to 9 GHz for 5G Massive MIMO Applications
The GRF2584 from Guerrilla RF is a Low Noise Amplifier (LNA) that operates from 3 to 9 GHz. It provides a gain of up to 36.5 dB with a noise figure of less than 1.4 dB and has an output P1dB of 17 dBm. This LNA is fabricated on a GaAs pHEMT process and is designed for high-performance wireless infrastructure applications. It requires a DC supply from 2.7 to 5 V and consumes 50 mA of current. The LNA is available in a surface-mount DFN 6-pin package that measures 1.5 x 1.5 mm and is ideal for 5GNR bands n48, n77, n78 and n79 massive MIMO base stations, automotive V2X (Band n47) front ends and high-performance RF infrastructure applications. Read more.
Omnidirectional 5G-NR Pole/Screw Mount Antenna from 617 to 5925 MHz
The 2J7A83JB-B16J from 2J Antennas is a 5G NR Antenna that operates from 617-960 MHz, 1427-2690 MHz, 3300-5000 MHz, and 5150-5925 MHz. This linearly-polarized antenna provides a peak gain of 3.6 dBi with an efficiency of 56.3% and has a VSWR of 1.7:1. It can handle an input power of up to 35 W. This antenna supports 5G NR, 4G LTE, FirstNet, CBRS, LPWA, CAT-X, CAT-Mx, CAT-NBx, NB-IoT, 3G, and 2G, providing backward compatibility with the existing networks. It is a heavy-duty antenna that delivers high performance and does not require a ground plane for mounting. Read more.
65 GHz Ganged SMPM Cable Assembly for 5G Applications
The Magnum RF™ GC86 from Samtec is a Ganged, Multi-Position SMPM Cable Assembly that operates up to 65 GHz. It has 0.086-inch low-loss flexible microwave/millimeter wave cables with a minimum bend radius of 8.9 mm. This cable assembly has a high-density, space-saving design with a single row of connectors and a push-on interface for quick installation. It is ideal for cable-to-board applications where space is limited and increases airflow for cooling when laying out footprints on PCB real estate. The GC86 is suitable for use in 5G networking, military/defense, radar, and test & measurement applications. Read more.
Click here to learn more about 5G-related products on everything RF.
