Note : Your request will be directed to AR RF/Microwave Instrumentation.

50W1000D Image

The 50W1000D from AR RF/Microwave Instrumentation is a Solid-Solid Power Amplifier that operates from 50 to 1000 MHz. This self-contained, air-cooled, broadband amplifier when used with a sweep generator, provides 70 W of output power with a gain of over 48 dB. It is protected from RF input overdrive by an input leveling circuit which controls the RF input level to the amplifier first stage when the input level is increased above 0 dBm. The amplifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure. The front panel indicates the operating status and fault conditions if an over-temperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared.

All amplifier control functions and status indications can also be viewed/controlled remotely using the GPIB/IEEE-488 format, RS-232, fiber optics, USB, and Ethernet. The bus interface connector is located on the back panel and positive control of the local or remote operation is assured by a local/remote switch on the front panel of the amplifier. The safety interlock circuit along with the remote switch prevents the amplifier from going into operating mode unless the external connection is made. A jumper plug is provided for cases where this functionality is not needed.

This CE and RoHS-compliant amplifier is available in a contemporary cabinet (19.8 x 6.1 x 21.7 in) for benchtop use or with the removed cabinet (19 x 5.2 x 21.7 in) for rack mounting with N-type (F) connectors. It has been designed for applications where instantaneous bandwidth, high gain, and linearity are required. The export classification for this equipment is EAR99.

Product Specifications

View similar products

Product Details

  • Part Number
    50W1000D
  • Manufacturer
    AR RF/Microwave Instrumentation
  • Description
    70 W Solid-Solid Power Amplifier from 50 to 1000 MHz

General Parameters

  • Type
    Power Amplifier
  • Configuration
    System
  • Industry Application
    Test & Measurement
  • Frequency
    50 MHz to 1 GHz
  • Gain
    48 dB
  • Noise Figure
    8 dB
  • Output Power
    46.53 to 47.78 dBm
  • Output Power
    44.98 to 59.98 W
  • Gain Control Range
    20 dB
  • P1dB
    46.53 to 47.78 dBm
  • P1dB
    45 to 60 W
  • IP3
    55 dBm
  • IP3
    316.23 W
  • Class
    A
  • Impedance
    50 Ohms
  • Pulsed/CW
    CW/Pulsed
  • Modulation
    AM, FM, Pulse
  • VSWR
    2.00:1
  • Sub-Category
    SSPA
  • AC Voltage
    100 to 240 V
  • Package Type
    Benchtop / Rackmount
  • Dimensions
    19.8 x 6.1 x 21.7 in (With Cabinet ), 19 x 5.2 x 27.7 in (Without Cabinet)
  • Connectors
    N Type, N Type - Female
  • Interface
    USB, IEEE-488, RS-232, Ethernet
  • Weight
    17.7 kg / 39 lbs (With Cabinet), 9.5 kg / 21 lbs (Without Cabinet)
  • Cooling Options
    Forced air
  • Operating Temperature
    5 to 40 Degree C
  • RoHS
    Yes

Technical Documents