Bird Technologies has introduced the compact SiteHawk SK-4000-TC Antenna and Cable Analyzer. The instrument makes troubleshooting the transmission path of commercial and military communications systems operating between 85 MHz to 4 GHz easier, faster, and more precise. As the successor to Bird’s popular Site Analyzer SA-3600 XT, the new instrument is 80% smaller, 60% lighter, and offers many new features as well.
Problems along the transmission path from where the signal exits the transmitter through the antenna are the most frequent causes of performance degradation in deployed communication systems. The SiteHawk SK-4000-TC quickly and precisely detects these problems, determines their location, and displays the results on its 1920-x-1080 pixel intuitive touch-screen display. It indicates impedance mismatch (VSWR) and return loss throughout the path as well as cable insertion loss over the entire range or one specified by the user. The instrument also employs Frequency Domain Reflectometry (FDR) to precisely locate the physical location of the problem or problems regardless of how far along the transmission they are from the instrument. Measurements include return loss or cable insertion loss in dB, VSWR, distance to fault in feet or meters, and distance-to-fault VSWR or return loss.
The SiteHawk SK-4000-TC has 16 Gbytes of high-speed flash memory that provides room for thousands of traces and instrument set-ups, and data can be offloaded via its USB interface to a flash drive or other external storage device. It has an internal removable battery, which provides a typical operating time per charge of 4 hr supplied with an AC adapter, hard and soft carrying cases, 1-m USB cable, 1-m long coaxial cable, USB flash drive and interface cable, and an international power adapter.
The fast swept measurement architecture of the SiteHawk SK-4000-TC is very fast, requiring only 0.025 ms per frequency point, and seven points throughout the desired frequency span can be chosen from 51 to 3201 data points per sweep. It has user-adjustable X and Y scales and units, six markers for direct or difference measurements, and a user-adjustable pass/fail limit that reduces operator error and reduces measurement time by providing visual “go/no-go” status. It can measure performance in relation to the user-selected limit line or a recalled trace, and a measurement-hold function allows a trace to be temporarily stored. Frequency can be set using either start-stop points or center and span frequencies. The SiteHawk SK-4000-TC is priced at $2,500 and is available now.
