RF cables and connectors are essential components used in radio frequency (RF) systems to transmit high-frequency signals while maintaining signal integrity and minimizing losses. They play a crucial role in connecting various RF devices, antennas, and systems, ensuring efficient communication and data transmission.
everything RF has compiled a list of cable & connector products that are new and trending on everything RF in August. Visit the Connectors & Cables Hub on everything RF to keep up to date with the latest product launches and news from this segment. We keep users up to date with new products, news, whitepapers, webinars, and events.
40 GHz Multiport Contact for Military Avionics and EW Applications
The M8M™ Multiport Contact from Times Microwaves System that operates up to 40 GHz. It is designed for advanced military avionics and electronic warfare (EW) applications that require extremely restricted space constraints and rising operating frequencies. This contact has a unique construction and is ideal for high-vibration and harsh environments. Read more
6 GHz Flame-Retardant Flexible Low-Loss RF Cable
The SPUMA_400-RS-FR from HUBER+SUHNER is a Flexible RF Cable that operates up to 6 GHz. It has been developed using rotary swaging technology and provides easy handling and installation due to its flexibility. This cable is an alternative to LMR coaxial cables (from Times Microwave Systems) and uses halogen-free materials with low loss and VSWR optimization. It is flame retardant and is suitable for use in defense, railway, and wireless infrastructure applications. Read more
1.85 mm Field Replaceable RF Connectors from DC to 65 GHz
The 5306 Series from San-tron are 1.85 mm Field Replaceable RF Connectors that operate from DC to 65 GHz. They can withstand a dielectric voltage of 500 VRMS and have a VSWR of less than 1.20:1. These connectors are available in 3/8 and 1/2-inch square, 2-hole 0.550” flange and 2-hole 0.625” flange configurations for 0.009” launch pin diameters. Other mounting options are available upon request. These connectors have high-performance gold-plated beryllium copper contacts, polyetherimide (PEI) capture beads, and rugged 303 stainless steel bodies. They have an operating temperature range of -65° to +165°C and are designed and built to deliver rugged dependability and exceptional repeatability. Read more
2.92 mm Jack to 2.92 mm Jack Hermetically Sealed Adapter from DC to 40 GHz
The PE1201 from Pasternack is an In-Series 2.92 mm Jack Hermetically Sealed Adapter that operates from DC to 40 GHz. It mates mechanically with commercially available SMA and 3.5 mm connectors. This adapter is based on the 2.92 mm series connector design and has a female-to-female gender configuration. It has been designed to prevent leakage of gases, making it suitable for high pressure or vacuum applications or whenever an airtight seal is required. This in-series adapter has a dielectric withstanding voltage of 750 V (RMS) and a voltage rating of 250 V (RMS). It has an insertion loss of 0.505 dB and a VSWR of 1.35:1. This RF adapter is available in a hermetically-sealed bulkhead-mount package that measures 0.89 x 0.56 x 0.56 inches with Beryllium Copper contacts and stainless-steel finish. Read more
145 GHz Flexible Microwave Cable Assemblies with 0.8 mm Connectors
The W6 Series from Withwave are Flexible Microwave Cable Assemblies that operate up to 145 GHz. They have an outer diameter of 1.02 mm and a minimum bend radius of 7 mm (installation) and 15 mm (repeated). These cable assemblies have a silver-plated Copper tape outer conductor, silver-plated Copper center conductor, solid PTFE insulator, and an FEP jacket. They have a dielectric withstanding voltage of 350 V (DC), provide shielding effectiveness of up to -90 dB, and have a velocity of propagation of 70%. They are available with 0.8 mm connectors. Read more
Amplitude & Phase Stable Microwave/RF Cable Assemblies to 67 GHz
The Stability Plus™ from Maury Microwave are amplitude and phase stable Microwave/RF Cable Assemblies that operate up to 67 GHz. They offer excellent measurement repeatability even while flexing the cables and are lightweight which makes them suitable for daily use with VNA's, test instruments, bench-top testing and ATE systems. They follow the proposed IEEE high-frequency connector/adapter color convention to avoid and eliminate damaged equipment, degraded equipment reliability, degraded performance and lengthy maintenance times due to improper mating (and attempted mating) of incompatible interconnects. Read more
N-Type Double-Row Test Cable Assembly from DC to 40 GHz
The BE40A from Samtec is a Double-Row RF Test Cable Assembly that operates from DC to 40 GHz. It supports up to 16 positions (per row) with stripline or microstrip transmission type options. This flexible cable assembly is available in lengths up to 1000 mm with a minimum bend radius of 3.175 mm and can withstand 1000 flex cycles. It has a dielectric withstanding voltage of 510 V (AC). The cable assembly is available with 2.92 mm connectors and has an operating temperature range from -65°C to +165°C. Read more
MIL-STD-348B Standard 2.92 mm RF Connectors from DC to 40 GHz
The 2.92 mm Series RF Connectors from Hirose Electronic operate from DC to 40 GHz. They conform to MIL-STD- 348B standards and provide excellent high-frequency performance with consistent mounting quality. The board receptacles of these connectors are screw-mounted instead of being soldered to the board and can be reused which reduces the mounting complexity. They are compatible with 0.085-inch flexible cables and offer compatibility with various PCB thicknesses. They are available in both male and female configurations and support up to 500 mating cycles. Read more
2.92 mm (F) Edge Launch PCB Connector from DC to 40 GHz
The P1CO-29FEL-05/09-LP from P1dB RF & MW Components is a 2.92 mm (female) End Launch PCB Connector that operates from DC to 40 GHz. This 50-ohm low-profile connector has a straight orientation and offers the best electrical match when mated with Microstrip printed circuit boards. It is field replaceable (non-solder attachment to PCB) and measures 0.745 x 0.374 x 0.5 inches with a center contact pin diameter of 0.005 inches. Read more
IP67/IP68-Rated Waterproof RF and Microwave Connectors
The Pisces Series are waterproof connectors from IntelliConnect that have been developed for use in mil-aerospace, SCADA, marine, medical, transportation, and oil and gas applications. These IP67 and IP68 rated connectors are sealed internally and are therefore waterproof when unmated. They are available in various connector formats that include: ABMS (Rugged MCX), N-Type, Push-Pull, TNC, and SMA. Read more
Rugged Multi-Port Connector System for Fixed/Rotary Winged Airframes
The Mega8 from MegaPhase is a Multi-Port RF Connector System that can be used in both fixed and rotary winged airframes. These RF interconnects have spring-loaded interfaces to ensure positive mating under extreme vibration conditions. They consist of individually sealed connector housings and cable assemblies. These housings can accept a variety of cable assemblies including flexible, semi-rigid, HyperFlex cables up to 0.48 inches in diameter. They are designed to meet the harsh requirements of MIL-T-81490 and MIL-C-87104 standards and are available with two plating options - Chemical Film and EN-PTFE. Read more
1.0 mm (M) End Launch Connector from DC to 110 GHz
The 2493-04A-12 from Southwest Microwave is a 1.0 mm (Male) End Launch PCB Connector that operates from DC to 110 GHz. This connector has a standard block style with 0.5-inch thread-in mounting and supports PCBs with a thickness of up to 0.1 inches. It has a launch pin of 0.005-inch diameter and the dielectric diameter is 0.029 inches. The connector is available in a stainless-steel housing and has a BeCu contact. Read more
Vapor-Sealed Cable Assemblies from DC to 40 GHz for Airborne Applications
The 7 Series from W. L. Gore & Associates are Microwave/RF Cable Assemblies that operate from DC to 40 GHz. They have an insertion loss of less than 2.56 dB/m and a nominal time delay of 1.2 ns/cm. These cable assemblies are qualified for aerospace applications and meet the MIL-T-81490 mechanical and environmental requirements for airframe cables. They have durable cable construction that ensure exceptional shielding effectiveness of over 90 dB and are vapor sealed to prevent ingress of water vapor, jet fuel, and other contaminants and ensure that the electrical performance is maintained over the entire life cycle. These cable assemblies are flexible for easy installation and have a diameter of 3.80-14.35 mm that allows easy routing in confined spaces. Read more
50 GHz mmWave Coaxial Cable Assemblies for VNA Connections
The 8 Series from Junkosha are mmWave Coaxial Cable Assemblies that operate up to 50 GHz. These VNA test assemblies exhibit phase stability of ± 4.5° and amplitude stability of ± 0.08 dB at 50 GHz in flexure alongside strong phase stability with temperature variations. They have an insertion loss of less than 6.2 dB and a VSWR of 1.43:1. These metrology-grade cable assemblies have a shielding effectiveness of more than 90 dB and a nominal propagation velocity of 79%. They can be bent 180° and have a 2.25-inch radius mandrel with no spring back. Read more
12 GHz Micro-Coax RF Connector
The MHF® 4L LK from I-PEX is a Coaxial RF Connector that operates up to 12 GHz. It is a Micro-coax connector that clicks into place seamlessly and is designed to keep signals connected through constant shock and vibration. This connector utilizes I-PEX’s patented locking mechanism for improved connection reliability and security and works with MHF 4/4L receptacles. It is ideal for rigorous connectivity applications in automotive, consumer electronics, data centers, medical, smart appliances, and telecommunications industries. This connector has a height of 2 mm and is suitable for use in 5G sub-6 GHz, IEEE802.11 a/b/g/, Wi-Fi 4/5/6, LTE/LTE-Advanced, LPWA, Bluetooth, and GPS applications. Read more
75-Ohm Straight BNC-Jack to BNC-Plug Adapter for 4K UHD Video Applications
The 112532-12G from Amphenol RF is a BNC-Jack to BNC-Plug Adapter. This 75-ohm in-series adapter has a push-on straight bulkhead design. It is designed for 12 Gbps-SDI video applications and is optimized for 4K Ultra HD broadcast video, providing fully intact signal transmission on a single channel. The adapter has a Brass body with a Nickel finish and Phosphor Bronze contact with a Gold finish. It is available in a package that measures 14.35 (Dia.) x 32.50 (L) mm. Read more
Click here to visit the Connectors & Cables Hub on everything RF.
