everything RF has compiled a list of trending Aerospace and Defense products on the website in October. Visit the Aerospace & Defense Hub on everything RF to stay updated with the Industry.
Versatile, Multi-Channel Software-Defined Radio from 30 MHz to 6 GHz
The Sidekiq™ NV800 from Epiq Solutions is a Software-Defined Radio (SDR) that operates from 30 MHz to 6 GHz (can be extended to 18 GHz). It consists of a dedicated RF transmitter with 8 RF receivers, each with a bandwidth of 50 MHz, for a total bandwidth of 400 MHz. This SDR incorporates four ADRV9004 RF transceivers (from Analog Devices), all streaming data and command & control to an AMD® ZU7 Ultrascale+™ FPGA. It is capable of operating in either phase coherent or independent modes and supports fixed frequency and fast frequency hopping modes of operation, both of which can support direction-finding use cases. Read more
HF Software-Defined Communication System for Airborne Applications
The HF-9500 from Collins Aerospace is a HF Communication System that is suitable for airborne applications. It features digital signal processing technology that delivers high-quality, reliable performance for military fixed-wing airborne applications. This system delivers an output power of 400 W and is designed to use a common suite of hardware and software components that meet Open Systems Architecture (OSA) and HF modernization requirements. This system is a software-defined replacement for ARC-190 models and is backwards compatible with legacy software and hardware. Read more
16-Array GPS/GNSS Anti-Jamming CRPA System for Maritime Platforms
The TUALAJ 16300-D from TUALCOM is a 16-array GPS/GNSS Anti-Jamming Controlled Reception Pattern Antenna (CRPA) System. It uses a state-of-the-art digital controller and novel beamforming techniques to eliminate interference to ensure the uninterrupted operation of GNSS receivers in the presence of up to 15 jamming sources. This system supports various messaging formats and integrates seamlessly with civil and military GNSS receivers deployed on land, sea, and air platforms (including unmanned systems) and fixed installations. It has an option for embedded high-performance GNSS receivers and allows SBAS signals to be utilized for increased accuracy and reliability. Read more
Microwave Signal Generator from 100 KHz to 20 GHz
The APMQS20 from AnaPico is a Signal Generator with a frequency range from 100 kHz to 20 GHz. This module has been designed to replace the QuickSyn FSW-0020 frequency synthesizer, which was phased out by NI a few years ago. AnaPico’s APMQS20 serves as a drop-in replacement, providing an uncomplicated transition for QuickSyn users and ensuring uninterrupted performance. Read more
Multiband Miniature Transceiver from 400 MHz to 16 GHz for Military Applications
The Exportable Multiband Miniature Transceiver (E-MMT) from Cubic operates from 400 – 470 MHz (UHF), 1000 – 1999 MHz (L-band), 2 – 2.5 GHz (S-band), 4.4 – 6 GHz (C-band) and 14.4 – 15.35 GHz (Ku-band). It provides reliable, secure communication links over hundreds of miles at data rates up to 100 Mbps, providing high-capacity IP channels for voice, data, and video. This transceiver can be programmed with legacy and custom waveforms and can store more than a dozen, field-selectable waveform modes for even wider interoperability. It can operate with any CDL specification-compliant platform, including all types of aircraft and ground terminals. Read more
Sinuous Antenna from 2 to 18 GHz for Military Aircrafts
The 8506674-501 from CAES is a Microwave-Band Sinuous Antenna that operates from 2 to 18 GHz. Sinuous Antennas provide RF performance similar to comparably-sized planar spiral antennas, while also supporting reception of multiple signal polarization. This dual-circular polarized antenna provides a gain of 0 dBi and has a VSWR of less than 3:1. It has a beamwidth of 70° and an axial ratio of 3 dB. The antenna includes an integrated solid-state RF switch and a quadrature coupler assembly with a single RF output that provides either right-hand circular polarization or left-hand circular polarization. Read more
Non-Blocking 32x32 Switch Matrix from 0.5 to 30 MHz
The SI-9332 from Leonardo DRS is a 32x32 Switch Matrix that operates from 0.5 to 30 MHz. It allows 32 inputs to be connected to 32 outputs with an isolation of 50 dB between ports. This non-blocking switch matrix automatically attenuates the RF output power when very large RF inputs are applied, and the input circuitry protects from high-voltage transients and nearby lightning strikes. It can handle an RF input power of up to 2 W (for operation) and provides input protection of 10 W (continuous) and 2 kV (pulse). Read more
Dual-Thread, 96-Channel Encrypted Airborne GPS Receiver
The Airborne SAASM Receiver (ASR) 3.7-DS from BAE Systems is an Airborne GPS Receiver for L1 and L2 bands. It has 96 channels (48 hardware channels per thread) and hosts individual civil and military receivers on a single ASR form factor board. This receiver has a Wide Area Augmentation System (WAAS) capability for extremely accurate positioning. It interfaces with BAE Systems' Digital GPS Anti-jam Receiver (DIGAR) to provide unmatched anti-jamming performance for warfighters who must operate in the most challenging environments. Read more
Ku-Band Integrated Microwave Assembly for UAS, SATCOM, and EW Applications
This Ku-Band Integrated Microwave Assembly (IMA) from MtronPTI has been designed for UAS, SATCOM and electronic warfare (EW) applications. It has Ku-band diplexer filters that are interconnected with two waveguide RF switches, a coupler and a low pass filter for harmonic suppression. The RF cables are fed from the diplexers to a separate RF module consisting of an RF board with low-noise amplifiers and an RF switch that switches the received signal between the two paths. It contains peripheral control and status circuitry for user access. Read more
Software-Defined Radios from 112 to 399.975 MHz for Air Traffic Control
The CM-300/350 (V2) Series from General Dynamics Mission Systems are Ground-to-Air Software-Defined Radios (SDRs) that operate in the VHF band from 112-150 MHz and UHF band from 225-399.975 MHz. They are based on the FAA NEXCOM Segment 2 requirements, providing reliable, clear, and uninterrupted communications to improve the safety of flight in the National Air Space (NAS). These radios adhere to global standards and contribute to less cost and more flexibility with integration into the radio equipment. Read more
Fully-Integrated Dual-Channel Radio System from 4400 to 4940 MHz
The THPR1021 from Triad RF Systems is a 2-channel High-Power Radio that operates from 4400 to 4940 MHz. This radio integrates the necessary RF amplification, control circuitry, and interfaces to achieve higher RF output power, greater throughput, and longer link distances compared to standalone radios. It combines Silvus Streamcaster SC4210P-467-O OEM radio at its core with Triad’s high-power RF subsystems in a low SWaP package. Read more
Low Noise Amplifier from 10 MHz to 20 GHz
The PLNA-30-10M20-SFF-DCSMA from Quantic PMI (Planar Monolithics) is a Low Noise Amplifier (LNA) that operates from 10 MHz to 20 GHz. It provides more than 26 dB of gain with a noise figure of less than 3.3 dB and has an output P1dB of +14 dBm. This LNA has a reverse isolation of more than 35 dB and a VSWR of less than 2.4:1. It requires a DC supply of +5 V and consumes less than 120 mA of current. This amplifier is available in a gold-plated package that measures 1.37 x 1.00 x 0.50 inches with SMA (female) connectors. Read more
4-Way, In-Phase Power Divider from 2 to 4 GHz for Military Applications
The P4S-3.100 from MECA is a 4-way Power Divider/Combiner that operates from 2 to 4 GHz. It can handle an input power of up to 20 W, provides 25 dB of isolation and has an insertion loss of less than 1 dB. This in-phase power divider has an amplitude balance of ±0.8 dB and a phase balance of ±7°. It is available in an aluminium module that measures 2 x 2 x 0.75 inches with SMA (female) connectors. Read more
Rugged Downconverter with an RF Frequency from 1.5 to 18 GHz
The RFX-3190 from Mercury Systems is an RF Downconverter that converts an input frequency (RF) from 1.5 - 18 GHz to an output frequency (IF) from 50 - 160 MHz. It provides a gain of 30 dB (gain adjustment range of 20 dB) with a noise figure of 12 dB and image rejection of more than 60 dB. This downconverter has a tuning resolution of 10 kHz (optional finer resolutions) and a tuning speed of 2 ms. It has a phase noise of -107 dBc/Hz (at 10 kHz offset) and spurious levels of less than -70 dBc. The converter employs advanced current circuity and components, assuring a long life without the problems of obsolescence and poor field reliability of past generations of equipment. Read more
Thermal Vacuum Qualified Directional Coupler from 2 to 8.6 GHz
The 102008616-TV from Krytar is a Thermal Vacuum Qualified Directional Coupler that operates from 2 to 8.6 GHz. It has a coupling value of 16 dB and frequency sensitivity of ±0.25 dB. The coupler has a directivity of over 20 dB and an insertion loss of less than 0.5 dB. It can handle up to 50 watts of average power and has a VSWR of 1.30:1. The coupler is available in a module that measures 2.13 (L) x 0.40 (W) x 0.73 (H) inches with SMA female connectors and is ideal for space, electronic warfare (EW), commercial wireless, SATCOM, radar, signal monitoring and measurement, antenna beam forming, and EMC testing environments. Read more
40 GHz Multiport Contact for Military Avionics and EW Applications
The M8M™ Multiport Contact from Times Microwaves System that operates up to 40 GHz. It is designed for advanced military avionics and electronic warfare (EW) applications that require extremely restricted space constraints and rising operating frequencies. This contact has a unique construction and is ideal for high-vibration and harsh environments. Read more
Multi-Orbit, Low-Profile Hybrid-GEO-LEO Terminal for Military Applications
The Osprey™ u8 from Kymeta is a Hybrid-GEO-LEO (HGL) Terminal that can be mounted on various military vehicles and vessels. It provides multi-orbit capability for mission-critical operations while on the move. This flat-panel terminal leverages the OneWeb Low Earth Orbit (LEO) network and combines the flexibility and reliability of GEO satellites with LTE for network redundancy in contested environments. It is designed and tested to MIL-STD and operates seamlessly with native power systems. Read more
Low Noise Amplifier from 7.25 to 7.75 GHz for SATCOM Applications
The TTI-X-LNA-7277 from TTI is a Low Noise Amplifier (LNA) that operates in the X-band from 7.25 to 7.75 GHz. It provides a gain of 50 dB with a noise figure of less than 0.0626 dB and has an output P1dB of more than 20 dBm. This LNA has spurious emissions of less than -60 dBc. It requires a DC supply from 12 to 28 V and consumes 200 mA of current (at 12 V). This LNA is available in a module that measures 101.2 x 65.8 x 46.6 mm with a WR-112 (CPR112G) input waveguide interface and SMA-female output connector. It is ideal for satellite communication applications. Read more
Click here to visit the Aerospace & Defense Hub on everything RF.
