ADMFM2000

Down Converter by Analog Devices (30 more products)

Note : Your request will be directed to Analog Devices.

ADMFM2000 Image

The ADMFM2000 from Analog Devices is a Dual-Channel Downconverter that converts input frequencies from 5 – 32 GHz to output frequencies from 0.5 – 8 GHz. Each down conversion path consists of a low noise amplifier (LNA), a mixer, an IF filter, a digital step attenuator (DSA), and an IF amplifier. A common LO input signal is split to feed two separate buffer amplifiers to drive the mixer in each channel. The downconverting mixer can be bypassed allowing direct access to the 0.5 to 8 GHz IF path. It is fabricated using a combination of surface mount and bare die components and provides precise gain adjustment capabilities with low distortion performance. This downconverter requires a DC supply from -5 to +5 V and consumes less than 2.18 W of power.

The ADMFM2000 is available in a CSP_BGA package that measures 20 x 14 mm and has an operating temperature range of -40°C to +85°C. It is ideal for use in phased array radar receivers, SATCOM receivers, electronic warfare, electronic test and measurement equipment and automatic test equipment.

Product Specifications

View similar products

Product Details

  • Part Number
    ADMFM2000
  • Manufacturer
    Analog Devices
  • Description
    Dual-Channel Integrated Downconverter from 5 to 32 GHz

General Parameters

  • Application
    Electronics Warfare, SATCOM, Test & Measurement, Test Equipment
  • Application Type
    Phased array radar receivers, Automatic test equipment
  • Type
    I/Q Downconverter
  • Number of Channels
    2
  • RF Frequency
    500 to 32000 MHz
  • LO Frequency
    7 to 30 GHz
  • IF Frequency
    0.5 to 8 GHz
  • Conversion Gain
    5 dB
  • Harmonics
    -69 dBc
  • P1dB
    10.5 to 16.5 dBm
  • IIP3
    23.5 dBm
  • LO/RF Isolation
    32 dB
  • Noise Figure
    3.5 dB
  • Input Power
    21 to 26 dBm
  • Supply Voltage
    5 V
  • Supply Input Current
    12 to 72 mA
  • Power Consumption
    2.18 W
  • Package Type
    Surface Mount
  • Package
    179-Ball BGA
  • Dimension
    20 x 14 x 2.36 mm
  • Storage Temp
    -40 to 150 Degree C
  • Operation Temperature
    -40 to 85 Degree C
  • RoHS
    Yes
  • Note
    Attenuation:31 dB (1 dB Step)

Technical Documents