N9048B

Note : Your request will be directed to Keysight Technologies.

N9048B Image

The N9048B from Keysight Technologies is a standards-compliant EMI test receiver equipped with an RF pre-selector and LNA designs. It has been developed to shorten the overall test time and easily perform gapless signal capture and analysis with real-time scan (RTS) capabilities. This EMI Test Receiver and diagnostic signal analyzer operate from 1 Hz to 44 GHz. It is fully CISPR 16-1-1:2019, MIL-STD-461G, ANSI C63.2, and FCC compliant.

The EMI Receiver displays signals in multiple viewing options such as frequency domain, time domain, and spectrogram. It offers regular and accelerated time domain scans, which enables faster EMC compliance testing. It has an analysis bandwidth of 10 MHz, a dynamic average noise level (DANL) of -174 dBm, and a phase noise of -114 dBc/Hz at 10 kHz offset (center frequency, 1 GHz).

The N9048B has an intuitive multi-touch user interface and is powered by Keysight’s Pathwave X-series software while allowing upgradeability to meet present and future test needs. It can be easily configured with additional features and capabilities to expand testing applications. The test receiver requires an AC supply of 100/120/220/240 V and consumes 630 W of power during active mode. It is available in an enclosure that measures 21.9 x 16.8 x 7.0 inches with SMA-female and BNC-female connectors.

Product Specifications

View similar products

Product Details

  • Part Number
    N9048B
  • Manufacturer
    Keysight Technologies
  • Description
    EMI Test Receiver from 1 Hz to 44 GHz for EMC Compliance Testing

General Parameters

  • Amplitude Accuracy
    ±2.7 dB
  • Amplitude Resolution
    0.1881 dB
  • Analysis Bandwidth
    40 MHz
  • Applications
    General Purpose
  • Attenuation
    0 to 70 dB
  • Attenuator Step
    2 dB
  • Bandwidth Accuracy
    ±0.044 to 0.25 dB
  • Connectors
    N Type, N Type - Female
  • Dimensions
    7 x 16.8 x 21.9 Inches
  • Display Resolution
    1280 × 800
  • Dynamic Range
    70 dB
  • EMC Standards
    CISPR16-1-1, MIL STD 461
  • Frequency
    1 Hz to 44 GHz
  • Frequency Stability
    1 ppm
  • IF Bandwidth
    200 Hz, 9 KHz, 120 kHz, 1 MHz, 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz
  • Impedance
    50 Ohms
  • Interface
    USB 3.0, Ethernet
  • IP3
    17 dBm
  • Measure Detection Method
    Peak, Quasi-Peak, EMI Average, RMS Average, Negative Peak, Voltage Average
  • Operating Temperature
    0 to 55 Degree C
  • Power Consumption
    20 to 630 W
  • Preamplifier Gain
    15 to 36 dB
  • Preselector
    289 kHz to 2.29 GHz
  • Real Time
    Yes
  • Real Time Bandwidth
    350 MHz
  • Resolution
    1 Hz to 8 MHz
  • Sampling Rate
    10 Msa/s
  • Selectivity
    4.1:1
  • Spurious Response
    -100 dBm
  • Storage Temperature
    -40 to 70 Degree C
  • Supply Voltage
    100 to 240 VAC
  • Sweep Point Receiver Mode
    1 to 4, 000, 001
  • Sweep Points Analyzer Mode
    1 to 100, 001
  • Video Bandwidth
    1 Hz to 3, 4, 5, 6, 8, 50 MHz
  • Weight
    24 kg

Technical Documents