The SPECTRAN® V6 PLUS 2000XA-6 from Aaronia is a Real-Time Spectrum Analyzer (RTSA) with a frequency range of 10 MHz to 8 GHz. It has a real-time bandwidth of 160 MHz (optional 245 MHz) I/Q and can scan 6 GHz of spectrum in less than 5 ms with a scanning speed of 1100 GHz (1.1 THz). This RTSA has an FFT-based probability of intercept (POI) of up to 97 ns and an I/Q-based POI of up to 10 ns. It is a real-time, high-performance, spectrum analyzer and monitoring receiver designed to capture even the shortest signal transmissions. This spectrum analyzer is ideal for use in spectrum monitoring, RF and microwave measurements, interference hunting, EMC testing and Wi-Fi and wireless network measurement applications.
The SPECTRAN® V6 PLUS 2000XA-6 can handle a Tx power of up to +20 dBm and an Rx input power of up to +23 dBm. It has a dual 16-bit analog-to-digital converter (ADC) at 2 GSPS and a 14-bit digital-to-analog converter (DAC) at 2 GSPS. This RTSA has a DANL of -170 dBm/Hz (internal pre-amplifier ON) and an amplitude accuracy of ±0.5 dB (compensated by FIR filter). It has an RBW (resolution bandwidth) of 62 mHz to 200 MHz and a frequency reference accuracy of 0.5 ppm (5 ppb via OCXO option). This spectrum analyzer has an XC7A200T-2 FPGA with 930 GMAC/s DSP processing and a 2 GB SDRAM. It supports Min, Max, AVG, Peak & QPeak detection.
The SPECTRAN® V6 PLUS 2000XA-6 can be controlled via USB 3.1 Gen1 or USB 3.2 Gen1 interfaces with a bandwidth of up to 784 MBytes/s sustained throughput to the PC. It supports concurrent reception of GPS/QZSS, GLONASS, BeiDou, and Galileo GPS constellations and has a GPS synchronization of ±10 ns timestamping in each data packet. It is USB-powered (via USB 3.2 Gen 1 Type-C PD 3.0) and consumes 15 W of power. This spectrum analyzer is available in a compact and lightweight enclosure that measures 210 x 115 x 30 mm and is ideal for measurements in both the field and in the lab.
