| New RF and Microwave Products this Week |
|
|
|
|
|
|
|
| Surface Mount Gain Block from 5 to 1000 MHz | |
RF Amplifier
from Guerrilla RF
|
| The GRF9896 from Guerrilla RF is a Gain Block that operates from 5 to 1000 MHz. It provides a gain of 25.4 dB with a noise figure of 1.3 dB and an output P1dB of 26.4 dBm. This amplifier is based on a GaAs pHEMT process, and it is designed for use in 75 ohm CATV and 50 ohm general-purpose applications. It requires a DC supply of 5 V and consumes 260 mA of current. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 20 dB Surface Mount Isolator from 8.5 to 10 GHz for Radar Applications | |
RF & Microwave Isolator
from Renaissance Electronics Corporation
|
| The 2SMH7NB from Renaissance Electronics Corporation is an isolator that operates from 8.5 to 10 GHz. It provides an isolation of 20 dB and has an insertion loss of less than 0.5 dB. This isolator can handle a forward input power of 10 W, a reverse power of 1 W, and a VSWR of 1.25:1. It is available in a surface mount package that measures 0.6 x 0.6 x 0.22 inches. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 90°Hybrid Coupler from 8 to 12 GHz for Mil-Aero Applications | |
90 Degree Hybrid Coupler
from TTM Technologies
|
| The XMC0812F1-03G from TTM Technologies is a 90 Degree Hybrid Coupler that operates from 8 to 12 GHz. This 3 dB hybrid coupler has an insertion loss of less than 0.5 dB and an isolation of more than 20 dB. It can handle an input power of up to 50 W and has a VSWR of less than 1.28:1. It has an amplitude balance of 0.5 dB and a phase balance of less than + 5 degrees. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| 2.4 / 5 GHz Wi-Fi 6 & Bluetooth Low Energy 5.4 Module | |
RF Module
from NXP Semiconductors
|
| The RW610 from NXP Semiconductor is a Wi-Fi 6 & Bluetooth Low Energy 5.4 Module that operates at 2.4 and 5 GHz. It has an MCU subsystem that includes a 260 MHz Arm® Cortex®-M33 core with Trustzone™-M, 1.2 MB on-chip SRAM and Wi-Fi & Bluetooth radios. This module has an integrated PA, LNA, & T/R switch, delivering a Tx power of up to +21 dBm (Wi-Fi) and +15 dBm (Bluetooth). |
| |
Download Datasheet |
Product Details | |
|
|
| Sponsored by Omnetics | | The impressive Nano-D connector | | Nano-D connectors are designed to perform at military specification levels for high reliability and to remain working in both portable applications and extreme environments. Nano-D connectors are available in a variety of configurations. Click here to learn more. | | | |
|
|
| Ultra-Broadband DC Feeder from 13 kHz to 110 GHz | |
Bias Tee
from HYPERLABS
|
| The HL9349 from Hyperlabs is an ultra-broadband DC feeder with a typical insertion loss of 2.5 dB from 13 kHz to 110 GHz. A DC feeder functions similarly to a bias tee, but without a DC blocking capacitor on the RF input. The HL9349 allows for the insertion of a DC bias current or voltage onto the RF circuit path with minimal perturbation of the impedance of a 50 ohm transmission line. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Negative Slope Equalizers from 2 to 18 GHz | |
Gain Equalizer
from Inmet by Spectrum Control
|
| The EQ1251 Series from Spectrum Control are Negative Slope Equalizers that operate from 2 to 18 GHz. They have delta slopes from 2 to 35 dB, an insertion loss of less than 6 dB and a linearity of ±4.0 dB. These equalizers can handle an input power of up to 1 W and have a VSWR of less than 1.80:1. They are available in housings that measure 0.36 (Dia.) x 1.57 (L) inches with passivated stainless steel SMA male/female connectors. |
| |
Download Datasheet |
Product Details | |
|
|
|
| WRD650 Double Ridge Bandpass Filter with Passband from 6 to 18 GHz | |
Waveguide Filter
from Scientific Microwave Corporation
|
| The WRD650 Bandpass Filter from Scientific Microwave Corporation is a Double Ridge Waveguide Bandpass Filter with a passband from 6 to 18 GHz. It has a passband insertion loss of 1.2 dB and provides a rejection of more than 45 dB above and below the passband. This double ridge BPF has a VSWR of 1.50:1 at the waveguide port and a VSWR of 1.60:1 at the coaxial port. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 6-Port VNA from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN0906 from Copper Mountain Technologies is a 6-Port VNA that operates from 300 kHz to 9 GHz. It is also available in 8, 10, 12, 14, and 16 port configurations. This VNA has a dynamic range of 140 dB and an output power adjustment range of -45 to +10 dBm with a noise floor of less than -138 dBm/Hz. It has a measurement speed of 24 μs and 2 to 500,001 measurement points per sweep. |
| |
Download Datasheet |
Product Details | |
|
|
|
| MIMO and 5G Simulation Software | |
Software
from Remcom
|
| Remcom’s 5G simulation software provides a complete solution, from system and MIMO antenna design through performance assessment in realistic, simulated environments, and planning for deployment in 5G networks. Our mission is to provide accurate solutions, optimized for performance to help our customers reliably predict how their systems will behave in the real world. Through active research and development, we have remained a leader in modeling and MIMO simulation technology for 5G and advanced wireless communications. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Portable Analog Signal Source from 9 kHz to 2/4/6.1 GHz | |
Signal Generator
from Keysight Technologies
|
| The AP5001A from Keysight Technologies is a Portable Analog Signal Generator that operates from 9 kHz to 2/4/6.1 GHz. This signal generator is designed to not only generate high quality RF signals for testing wireless modules/systems but to also accelerate tests and boost throughput. It delivers an output power from -30 dBm to +17 dBm with a power resolution of 0.01 dB and has a frequency step size of 0.001 Hz. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Wire-Wound Ceramic Chip Inductors from 0.45 to 24 nH | |
RF Inductor
from Coilcraft
|
| The 016008C Series from Coilcraft are Ceramic Chip Inductors with inductance values from 0.45 to 24 nH. These wire-wound inductors have a DC resistance of less than 1550 mOhms and can handle up to 550 mA of RMS current @ 25°C. They have a higher Q-factor than their thin-film counterparts, making them suitable for high-frequency applications in cell phones, wearable devices, and LTE or 5G IoT networks. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Passive GaAs Equalizer MMIC from DC to 14 GHz | |
Gain Equalizer
from Marki Microwave
|
| The MEQ14-14ASM from Marki Microwave is a Passive GaAs Equalizer MMIC that operates from DC to 14 GHz. It has a positive gain slope with attenuation options of 3,6,10 dB. This passive equalizer has an insertion loss of less than 1.3 dB and provides a return loss of 29 dB. It has been designed to compensate for low-pass filtering effects in RF/microwave and high-speed digital systems. |
| |
Download Datasheet |
Product Details | |
|
|
|
| LTE Cat. M1/NB1 and Sigfox LPWA Module from 600 MHz to 2.7 GHz | |
Cellular Module
from GCT Semiconductor
|
| The GDM7243i from GCT is an LTE Cat. M1/NB1 and Sigfox LPWA Module that operates from 600 to 960 MHz and 1.7 to 2.7 GHz. It complies with the 3GPP Release 13 LTE Advanced Pro standard and has various hybrid connectivity modes supporting Cat. M1, NB1, GSM, BLE, GPS and Sigfox. This module has a high-performance Cortex-R4 MCU with an integrated RF transceiver, baseband, and 2 MB SRAM. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 10 MHz High Stability OCXO with LVTTL Output | |
OCXO
from Dynamic Engineers
|
| The OCXO2525BM-FD-10MHz_LVTTL from Dynamic Engineers is an OCXO that operates at 10 MHz. It has an LVTTL output and has a frequency stability of ±10 ppb across an operating temperature range of -40°C to +85°C. This OCXO has a phase noise of -156 dBc/Hz and aging of ±50 ppb per year. It requires a DC supply of 3.3 V and consumes less than 1.3 W of power. This OCXO is available in a package that measures 25.4 x 25.4 x 12.7 mm. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 1 to 50 dB Fixed Attenuators from DC to 18 GHz | |
Fixed Attenuator
from Qualwave
|
| The QFA1850 from Qualwave are Fixed Attenuators that operate from DC to 18 GHz. They are available in 1 to 10, 20,30,40, and 50 dB attenuation values. These 50-Ohm attenuators can handle an average input power of 50 W, a peak power of up to 1000 W, and have a VSWR of less than 1.45:1. They are available as connectorized modules and have SMA or N-Type male/ female connectors. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Silicon SPDT Non-Reflective Switch from 9 kHz to 20 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5031 from Analog Devices is a Silicon SPDT Non-reflective switch that operates from 9 kHz to 20 GHz. It has a switching speed of 3 us, provides an isolation of 45 dB and an insertion loss of less than 1 dB. This silicon switch can handle an input power of 33 dBm (~2 W), a peak input power of 35 dBm (~3.16 W), and has a return loss of 17 to 22 dB. |
| |
Download Datasheet |
Product Details | |
|
|
|
| MANET Radio from 1350 to 2500 MHz | |
Software Defined Radio
from Silvus Technologies
|
| The StreamCaster LITE 5200 from Silvus Technologies is a MANET Radio that operates at 1350 to 1440 MHz (L-Band) and/or 2200 to 2500 MHz (S-Band) frequencies. It unifies C2, sensor, and telemetry data with communications relay capabilities in one streamlined OEM module in a copact OEM module. This tactical radio delivers a data rate of up to 100 Mbps with an average latency of 7 ms and can support more than 550 nodes. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 60 GHz Radio IC for FWA Applications | |
Front End Module
from Peraso Technologies, Inc
|
| The PRS1165 from Peraso Inc. is a Radio IC that operates at 60 GHz. It has 16 RF chains and 16 Tx/Rx antenna ports. This IC has a Tx output power of up to 24 dBm and an Rx noise figure of 7 dB. It has an integrated crystal oscillator and a configurable filter for optimal 1/2 and 1/4 channel operation. This radio IC has a PLL that tunes to channels 1 to 6 in half-channel steps and supports BPSK, QPSK, and 16-QAM single carrier modulation. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1:2 Low Loss Balun MMIC from 27 to 100 GHz | |
Balun
from mmTron Inc
|
| The TMC813D from mmTron is an Low Loss Balun MMIC that operates from 27 to 100 GHz. This balun converts balanced signals to unbalanced signals with an impedance ratio of 1:2. It has an insertion loss of 3.5 dB and provides a common-mode rejection ratio of 30 dB. This moisture-protected balun has an amplitude balance of 0.8 dB and a phase balance of 1.9°. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 3GPP Release 11 LTE Cat 1 Module for M2M and IoT Applications | |
Cellular Module
from Quectel
|
| The EG91-EX from Quectel is a LTE Cat 1 Module that supports 3GPP Release 11 LTE technology. It delivers an uplink data rate of up to 5.76 Mbps and a downlink data rate of up to 42 Mbps. This module is backward-compatible with existing GSM/GPRS and UMTS/HSPA+ networks and hence can be connected even in remote areas devoid of 4G network coverage. |
| |
Download Datasheet |
Product Details | |
|
|
|
| IP67-Rated Compact Dual Triplexer from 1695 to 2690 MHz | |
Triplexer
from Microlab
|
| The BK-3105T from Microlab is a Dual Triplexer that operates from 1850-1995 MHz, 1695-1780 MHz/2110-2200 MHz, and 2305-2690 MHz. It enables combining or splitting of PCS/AWS bands with WCS and 2.5/BRS for 5G carrier aggregation in DAS and small cells in a 2x2 MIMO format. This triplexer can handle an average input power of 60 W, a peak input power of 1 kW, and has a return loss of more than 18 dB. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| Horizon-Nulling GNSS Active Antenna from 1189 to 1610 MHz | |
GPS/GNSS Antenna
from GPS Source
|
| The MRPA-3A from General Dynamics is a GNSS Active Antenna that operates from 1189 to 1254 MHz and 1559 to 1610 MHz. It covers GPS (L1, L2, L5), GLONASS (L1, L2, and L3) and GALILEO (E1, E5, E6) bands. This Horizon-Nulling GNSS antenna can null terrestrial interferences arriving at low elevation angles of 10 to 20 degrees with a rejection of more than 20 dB. |
| |
Download Datasheet |
Product Details | |
|
