| Featured Products this Week |
|
|
|
|
|
|
|
| Ultra Low Phase Noise VCXO from 131 to 250 MHz | |
VCXO
from Crystek Corporation
|
| The CVPD-952X-245.760 from Crystek Corporation is a Voltage Controlled Crystal Oscillator (VCXO) that operates at 245.760 MHz. It has an LVPECL output waveform with a symmetry of less than 45/55% (at the crossing point). This VCXO has ±10% linearity, a rise/fall time of less than 2ns and an enable/disable time of less than 200 μs. |
| |
Download Datasheet
Product Details | |
|
|
|
| 750 W Solid-State High-Power Amplifier from 80 to 1000 MHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2071A-LC from Exodus Advanced Communications is a solid-state high-power amplifier that operates from 80 to 1000 MHz. This class A/AB linear amplifier provides over 750 Watts of saturated power (600 W P1dB) with a power gain of over 60 dB. This LDMOS amplifier features built-in protection circuits and is suitable for all single channel modulation standards. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 dB Directional Coupler from 380 to 960 MHz | |
Directional Coupler
from MECA
|
| The 715-10-0.670 from MECA is a Directional Coupler that operates from 380 to 960 MHz. This 10 dB coupler has a directivity of more than 25 dB and an insertion loss of less than 0.1 dB. It can handle an average input power of 25 W and a peak input power of 10 kW. This RoHS-compliant coupler is available in a module that measures 6.08 x 2.25 x 0.88 inches with N-type (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 13 dB GaAs Attenuator MMIC from DC to 110 GHz | |
Fixed Attenuator
from Marki Microwave
|
| The ATN13-00110CH from Marki Microwave is a GaAs RF Attenuator MMIC that operates from DC to 110 GHz. This 13 dB attenuator has an attenuation accuracy of 1.6 dB and has a return loss of 25 dB. It is available as a bare die that measures 0.6 x 0.6 mm and is ideal for test equipment, precision characterization, high channel count systems, amplitude matching, and 5G transceiver applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 15 W GaN MMIC Power Amplifier from 13.75 to 14.5 GHz | |
RF Amplifier
from Qorvo
|
| The QPA0016 from Qorvo is a GaN MMICPower Amplifier that operates from 13.75 to 14.5 GHz. It delivers an output power of 15 W (~42 dBm) with a small signal gain of 35 dB and a power-added efficiency (PAE) of 32%. This amplifier is fabricated using Qorvo's production 0.15 µm GaN-on-SiC process (QGaN15) and has third-order intermodulation distortion products of 25 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Double-Balanced Passive Diode Mixer from 2.5 to 8 GHz | |
RF Mixer
from MACOM
|
| The MAMX-011033 from MACOM is a Double-Balanced Passive Diode Mixer with a LO/RF frequency from 2.5 to 8 GHz and an IF frequency from DC to 3.5 GHz. It has a conversion loss of 7 dB, an input IP3 of 16 dBm and requires an LO power of 15 dBm. It has an LO-to-RF isolation of 37 dB, LO-to-IF isolation of 40 dB, and RF-to-IF isolation of 18 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ultra-Low Noise RF Signal Generator from 3 to 10/20 GHz | |
Signal Generator
from QuSinus
|
| The PureWave QSSGHG10G from QuSinus is a Signal Generator that operates from 3 to 10 GHz. This signal generator has been meticulously designed to deliver excellent signal purity and frequency stability, making it ideal for a broad range of measurement applications. It has an output power range from -10 to +10 dBm (can be extended from –70 to +18 dBm) and a phase noise of -155 dBc/Hz (at 100 kHz offset, 10 GHz frequency). |
| |
Download Datasheet
Product Details | |
|
|
|
| Cavity-Backed Sinuous Antenna from 18 to 50 GHz | |
Antenna
from Nuvotronics, Inc.
|
| The PSA1850 from Cubic Nuvotronics is a Cavity-Backed Sinuous Antenna that operates from 18 to 50 GHz. This dual linear/circularly polarized antenna provides a peak gain of 4.5 dBi and has an axial ratio of 2 dB. It has a half-power beamwidth of 65°. This 4-arm antenna measures 30.007 x 10.414 mm and has SMPM connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Software-Defined Radio Transceiver from 5 MHz to 18 GHz | |
Software Defined Radio
from Pacific Defense
|
| The SX-430 from Pacific Defense is a Software-Defined Radio (SDR) Transceiver that operates from 5 MHz to 18 GHz. This transceiver’s design is aligned with SOSA and CMOSS technical standards and is equipped with Xilinx Zynq UltraScale+ MPSoC (C2 and DSP), memories (12 GB DDR4, EPROM, flash), two transmitters and receivers. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single-Channel Wideband Capture and Record System from 20 Hz to 26.5 GHz | |
RF Spectrum Recording and Playback System
from Spectra Lab
|
| The SD-BTO-3823 from Testforce is a Single-Channel RF Spectrum Capture and Record System that operates from 20 Hz to 26.5 GHz. This system is designed to record a wide block of RF spectrum in congested spectral environments using a single channel. It consists of a quad-core embedded CPU, disk storage subsystem, and National Instruments’ modular RF instruments in PXIe form-factor. |
| |
Download Datasheet
Product Details | |
|
|
|
| 222.5 to 267.5 GHz Radar Front End for Short-Range Radar Systems | |
Radar Sensor
from indie Semiconductor
|
| The TRA_240_091 from Indie Semiconductor is a Radar Front End (RFE) that operates in the ISM band of 222.5 to 267.5 GHz. The 45 GHz bandwidth gives it a radar range resolution down to 6 mm in air and better than 6 mm for other materials with a refractive index higher than one with the maximum range reaching several meters depending on the gain of the lens that is used. |
| |
Download Datasheet
Product Details | |
|
|
|
| Digital H-Field Probe from 1 Hz to 400 kHz | |
Near Field Probe
from Narda Safety Test Solutions
|
| The BFD-400-1 from Narda Safety Test Solutions is a Digital H-Field Probe that is designed for isotropic measurement of magnetic flux density in the frequency range from 1 Hz to 400 kHz. It integrates a 100 cm2 sensor for isotropic (direction-independent) measurement and has a dynamic range of 70 dB. This probe can perform simple measurements for standard-compliant evaluation as well as detailed measurements for detailed signal and field strength composition analysis. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable Mini Compact Range Test System from 4 to 110 GHz | |
Antenna Measurement System
from Microwave Vision Group
|
| The CR-M20 from Microwave Vision Group is a Portable Mini Compact Range Test System that operates from 4 to 110 GHz. It is an all-in-one system that has been designed for cost-effective over-the-air (OTA) testing of microwave and mmWave high-gain antennas and radars. This OTA test system consists of a device under test (DUT) positioner, absorber, reflector system, feed horns, rotator, data analysis workstation, positioned controller, mmWave boxes, RF cables, and vector network analyzer (VNA). |
| |
Download Datasheet
Product Details | |
|
|
|
| Horizon-Nulling GNSS Active Antenna from 1189 to 1610 MHz | |
GPS/GNSS Antenna
from GPS Source
|
| The MRPA-3A from General Dynamics is a GNSS Active Antenna that operates from 1189 to 1254 MHz and 1559 to 1610 MHz. It covers GPS (L1, L2, L5), GLONASS (L1, L2, and L3) and GALILEO (E1, E5, E6) bands. This Horizon-Nulling GNSS antenna can null terrestrial interferences arriving at low elevation angles of 10 to 20 degrees with a rejection of more than 20 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| UHF Flexible On-Metal RFID Tags | |
RFID Tag
from GAO RFID
|
| The 11628X from GAO RFID is an On-Metal RFID Tag that operates in the UHF frequency range from 860 to 960 MHz. It uses an Impinj Monza 730 or NXP UCODE 8 IC and is specifically designed for effortless application onto metallic assets. This flexible tag complies with EPC Class-1 Gen2 and ISO 18000-6C standards. It is compatible with RFID printers for printing and encoding and has a read range of 5 to 15 meters. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE Cat. M1/NB1 and Sigfox LPWA Module from 600 MHz to 2.7 GHz | |
Cellular Module
from GCT Semiconductor
|
| The GDM7243i from GCT is an LTE Cat. M1/NB1 and Sigfox LPWA Module that operates from 600 to 960 MHz and 1.7 to 2.7 GHz. It complies with the 3GPP Release 13 LTE Advanced Pro standard and has various hybrid connectivity modes supporting Cat. M1, NB1, GSM, BLE, GPS and Sigfox. This module has a high-performance Cortex-R4 MCU with an integrated RF transceiver, baseband, and 2 MB SRAM. |
| |
Download Datasheet
Product Details | |
|
|
|
| L1 and L5 GNSS Front End Module with LNA and Post-Filter | |
Front End Module
from Skyworks Solutions
|
| The SKY55951-11 from Skyworks is a GNSS Front End Module that supports L1 and L5 GNSS frequencies. It has dedicated L1 and L5 receive paths with an integrated L1 LNA, B13 notch post-filter, and an L5 LNA and post-filter. The LNAs deliver a small signal gain of up to 17.5 dBm and have a noise figure of less than 1.5 dB. It has a return loss of less than 18 dB (output) and 8 dB (input). |
| |
Download Datasheet
Product Details | |
|
|
|
| Wi-Fi 6 and Bluetooth LE 5.4 A-IoT Module with Integrated AI/ML Acceleration | |
RF Module
from SparkLAN
|
| The WL72917_8M from SparkLAN is a Wi-Fi 6 and Bluetooth Low Energy (BLE) 5.4 A-IoT Module that is designed to provide reliable wireless connectivity and enhanced energy efficiency for the next-generation A-IoT applications. It is powered by Silicon Labs’ chipset and consists of an ARM Cortex-M4F core running at up to 180 MHz, an AI/ML hardware acceleration, 672 KB SRAM, 16 MB external PSRAM, and an 8 MB flash memory. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.85 mm Female Edge Launch PCB Connector from DC to 67 GHz | |
RF Connector
from San-tron
|
| The 5313-01-PJN from Santron is a 1.85 mm Jack Edge Launch PCB Connector that operates from DC to 67 GHz. It has a dielectric withstanding voltage (DWV) of 300 V (RMS) and a VSWR of 1.45:1. This connector can handle up to 500 mating cycles. It measures 0.800 x 0.500 inches and has a passivated stainless steel body, a PTFE insulator, & beryllium copper contacts. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP67-Rated Compact Dual Triplexer from 1695 to 2690 MHz | |
Triplexer
from Microlab
|
| The BK-3105T from Microlab is a Dual Triplexer that operates from 1850-1995 MHz, 1695-1780 MHz/2110-2200 MHz, and 2305-2690 MHz. It enables combining or splitting of PCS/AWS bands with WCS and 2.5/BRS for 5G carrier aggregation in DAS and small cells in a 2x2 MIMO format. This triplexer can handle an average input power of 60 W, a peak input power of 1 kW, and has a return loss of more than 18 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
