| New RF and Microwave Products this Week |
|
|
| Programmable Microwave Up Converter from 24 to 44 GHz | |
RF Upconverter
from Analog Devices
|
| The ADMV1013S is a wideband, microwave upconverter that accepts an input IF frequency of 0.8 to 6 GHz and upconverts it to an RF frequency from 24 to 44 GHz. The upconverter has 2 upconversion modes - direct conversion from baseband I/Q to RF and single-sideband (SSB) upconversion from real IF. The serial port interface (SPI) allows adjustment of the quadrature phase and mixer gate voltage to allow optimum sideband suppression and local oscillator (LO) nulling. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3x Frequency Multiplier from 10 to 22 GHz | |
Frequency Multiplier
from Mini Circuits
|
| The ZXF90-3-223-K+ from Mini-Circuits is a 3x Frequency Multiplier that converts input frequencies of 3.33 to 7.33 to output frequencies of 10 to 22 GHz. It has a conversion loss of less than 21.5 dB and a harmonic suppression of 25 to 65 dBc. This frequency multiplier is based on GaAs HBT process and can handle an input power of +12 to +18 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Weatherproof Microwave Downconverter from 17 to 53 GHz | |
Down Converter
from Rohde & Schwarz
|
| The R&S CS-MC53 from Rohde & Schwarz is a Microwave Downconverter that converts input frequencies from 17 to 53 GHz (RF) to output frequencies from 3.2 to 6.2 GHz (IF). It extends the frequency range of the R&S EM200 digital receiver, R&S UMS400 universal monitoring system, and R&S ESMW ultra-wideband monitoring receiver to measure 5G signals and satellite links in the mmWave frequency range. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cryogenic Solid-State Automated Impedance Tuner from 2 to 18 GHz | |
Automated Tuner
from Maury Microwave
|
| The CT-2G-18G from Maury Microwave is a Cryogenic Automated Impedance Tuner that operates from 2 to 18 GHz. It utilizes solid-state technology and is designed for use at temperatures down to 4 K. This impedance tuner performs noise parameter measurements on unmatched transistors or an existing low noise amplifier (LNA). It evaluates noise and gain circles with 4 impedance states, and determines the best impedance match that meets the design requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable 1-Port Vector Network Analyzer from 85 MHz to 14 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The R140B from Copper Mountain Technologies is a 1-Port Vector Network Analyzer that operates from 85 MHz to 14 GHz. It supports linear, log and segment sweeps with up to 100,001 measurement points per sweep and a measurement time of 170 µs per point. This VNA has a dynamic range of 112 dB (85 – 4.8 GHz) and a directivity of 42 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flexible Cables from DC to 18 GHz for RF Testing Applications | |
RF Cable Assembly
from NexTek, LLC.
|
| The NexTek ExTreme Flex from NexTek are RF Test Cables that operate from DC to 18 GHz. They are designed for testing sensitive RF electrical components while providing very high flexibility and durability. These test cables facilitate the testing task and maintain consistent RF stability and isolation throughout the entire testing process. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1630 MHz Coaxial Resonator Oscillator | |
Voltage Controlled Oscillator
from Crystek Corporation
|
| The CVCO55CC-1630-1630 from Crystek Corporation is a Resonator Oscillator that operates at 1630 MHz. It provides an output power of +2.5 dBm. This oscillator has a tuning voltage from 0.3 to 4.7 V and a tuning sensitivity of 10 MHz/V. It provides a harmonic suppression of -15 dBc and has a phase noise of -120 dBc/Hz (at 10 kHz offset). |
| |
Download Datasheet
Product Details | |
|
|
| Editor's Pick | | Mergers & Acquisitions in the RF & Microwave Industry in 2024 | | The RF & Microwave Industry started seeing an increase in Merger & Acquisition Activity over the last few years. 2024 was no different with a number of significant mergers taking place in the RF & Microwave Industry. From tech giants to smaller companies coming together to form a new powerhouse, these mergers have the potential to shake up the market and redefine business practices positively. Click here to read more. | | | |
|
|
| 10.5 dB Broadband Coupler from 5 to 1800 MHz | |
Directional Coupler
from MACOM
|
| The MACP-011120 from MACOM is an RF Coupler that operates from 5 to 1800 MHz. This 10.5 dB coupler has an insertion loss of less than 1.6 dB and an isolation of 24 dB. It can handle an input power of up to 1 W and has a return loss of 16 dB (input) and 22 dB (output). This RoHS-compliant coupler offers excellent temperature stability and is reflow compatible up to 260°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 W GaN Hybrid Power Amplifier from 2.4 to 2.5 GHz | |
RF Amplifier
from RFHIC
|
| The RIH25030-20 from RFHIC is a GaN on SiC Hybrid Power Amplifier that operates from 2400 to 2500 MHz. It delivers an output power of 30 W (44.77 dBm) with a gain of 15.5 dB and has a drain efficiency of 70%. The amplifier requires a drain voltage of 45 V and is input/output matched to 50 ohms. It is designed for CW, pulse, and linear operation and can be used for industrial heating & drying, scientific, medical, plasma generator, anti-drone systems, and jamming system applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 W Pulsed Power Amplifier from 34 to 36 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-HPA-3400-3600-43 from Erzia is a Power Amplifier that operates from 34 to 36 GHz. It delivers a saturated output power of 43 dBm (~20 W) with a small signal gain of 45 dB and a flatness of ±1.5 dB. This pulsed amplifier has a noise figure of 8 dB with a VSWR of less than 1.50:1 (Input & Output). It requires a DC supply of 28 V and consumes less than 165 W of power. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 W GaN-on-SiC HEMT from DC to 8 GHz | |
RF Transistor
from Guerrilla RF
|
| The GRF0010 from Guerrilla RF is a GaN-on-SiC HEMT Transistor that operates from DC to 8 GHz. It delivers a saturated output power of 15 W with a small signal gain of 15 dB and a drain efficiency of 62%. This transistor operates over a wide bandwidth and supports both linear and pulsed operations. It requires an operating drain voltage of 28 or 50 V and consumes 15 mA of quiescent drain current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 Ohm Digital Step Attenuator with SMA Female Connector | |
RF Variable Attenuator
from Vaunix
|
| The LDA-602 Lab Brick Digital Attenuator with SMA female connectors is a 50-ohm RF step attenuator with calibrated operation up to 6 GHz. This unit connects to a USB port for control and power and requires no additional DC supply voltage. It is easily programmable for fixed attenuation or swept attenuation ramps directly from the included GUI. |
| |
Download Datasheet
Product Details | |
|
|
|
| WR-15 Double Balanced Mixer from 50 to 75 GHz | |
Waveguide Mixer
from Marki Microwave
|
| The MXDB-1500WG from Marki Microwave is a Double Balanced Mixer with an RF/LO frequency range from 50 to 75 GHz and an IF frequency range from DC to 25 GHz. It has a conversion loss of 7.2 dB and an LO drive power of 14 dBm. This mixer can be used as both an upconverter and a downconverter, and it is designed for applications requiring high linearity in the WR-15 waveguide band. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 W RF Amplifier from 30 to 512 MHz | |
RF Amplifier
from Ultralife Corporation
|
| The A-2303 from UltraLife is an RF Amplifier that operates from 30 to 512 MHz. It delivers an output power of 7-20 W and has a noise figure of less than 3 dB. This amplifier has an Rx path insertion loss of less than 2 dB & 12 dB (with LNA “ON”) and an Rx path VSWR of less than 2.0:1. It requires a DC supply of 10-36 V and consumes 65 W (Tx) & less than 10 W (Rx) of power. |
| |
Download Datasheet
Product Details | |
|
|
| Featured e-Book | Download Now! | | |
|
|
| L-Band Personal Software Defined Radio (SDR) from 1.2 to 1.7 GHz | |
Software Defined Radio
from Domo Tactical Communications
|
| The Sentry Mesh 6161 from Domo Tactical Communications (DTC) is a Personal Software Defined Radio (SDR) that supports MeshUltra™ MANET waveforms over a frequency range of 1.2 to 1.7 GHz (L band). It delivers a data rate of up to 87 Mbps and has various bandwidth values ranging from 1.25 to 20 MHz over 2 channels delivering a programmable output power of up to 1 W per channel (2 W total). |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz GPS Disciplined OCXOs | |
OCXO
from Abracon LLC
|
| The ABCM-51 Series from Abracon are GPS Disciplined Oven Controlled Crystal Oscillators (OCXOs) that operate at 10 MHz. These OCXOs are designed to leverage the strengths of GPS technology and high-quality crystal oscillators to achieve high precision and accuracy in timing and frequency control. They produce CMOS output waveforms with a frequency accuracy of ±1 x 10^12 and a frequency stability of ±0.2 ppb (vs. temperature). |
| |
Download Datasheet
Product Details | |
|
|
|
| Symmetrical Reflective SPDT Switch from 30 MHz to 1.4 GHz | |
RF Switch
from Tagore Technology
|
| The TS86236P from Tagore Technologies is a Symmetrical Reflective SPDT Switch that operates from 30 MHz to 1.4 GHz. It provides an isolation of 70 dB, has a switching speed of 50 µs, and an insertion loss of 0.08 dB. This SPDT switch can handle a CW input power of 200 W and has a return loss of 41 dB. It uses a 2nd generation SPDT switch technology and is designed for high-power switching applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Grade SP6T Switch from 617 to 6000 MHz | |
RF Switch
from Qorvo
|
| The QPC8014Q from Qorvo is an SP6T Switch that operates from 617 to 6000 MHz. It has a switching speed of 3.2 µs and provides an isolation of 45 dB (LTE Band 5). This AEC-Q100 Grade 3-qualified switch can handle a CW input power of 37 dBm (~5 W) and has an insertion loss of 0.44 dB and a VSWR of 1.10:1. It is optimized for LTE and diversity applications, and allows for the smallest solution size with compatibility for RF front-end (RFFE) 2.0. |
| |
Download Datasheet
Product Details | |
|
|
|
| SP4T Absorptive Switch from 1 to 5 GHz | |
RF Switch
from iCana
|
| The ICASS1050-4T from iCana RF is an SP4T Absorptive Switch that operates from 1 to 5 GHz. It has a switching time of less than 450 ns and an isolation of more than 65 dB (RFx-RFc and RFx-RFx). This switch can handle an input CW power of up to 33 dBm and has an insertion loss of less than 0.7 dB with a return loss of more than 20 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Modular Reverberation Chamber from 18 to 40 GHz | |
Anechoic Chamber
from Microwave Vision Group
|
| The RVC-1000 from Microwave Vision Group is a Modular Reverberation Chamber that operates from 18 to 40 GHz (lowest usable frequency – 1000 MHz). This test chamber is particularly suited for immunity testing for EMC measurements. It also supports MIL STD 461 and DO160-compliant high intensity radiated fields (HIRF) testing with field strengths exceeding 4000 V/m when paired with appropriate test systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5/6 and 7 GHz WiFi 6/6E and Bluetooth 5.3 Module | |
RF Module
from SparkLAN
|
| The AP5811SA from Sparklan is an IEEE 802.11ax/ac/a/b/g/n WiFi 6/6E and Bluetooth 5.3 Module that operates at 2.4 GHz ISM and 5/6 GHz UNII bands. It delivers a data rate of up to 500 Mbps with a Tx power of up to 20 dBm and has an Rx sensitivity of up to -94 dBm. This module is based on a Synaptics chipset and supports single-stream spatial multiplexing with OFDMA (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM) for 802.11ax modulation schemes. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Way MMIC Power Divider from 0.5 to 6 GHz | |
Power Divider
from AMCOM Communications, Inc.
|
| The AM0560PD-2 from Amcom Communications is a 2-Way Power Divider that operates from 0.5 to 6 GHz. It provides more than 15 dB of isolation and has an insertion loss of less than 0.9 dB. This 50-ohm power divider can handle an input power of up to 50 W and has a return loss of 19 dB. It has an amplitude balance of 0.5 dB and a phase balance of less than 6°. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE Cat 4 Smart Modules for M2M Applications | |
Cellular Module
from Quectel
|
| The SC682A Series from Quectel are LTE Cat 4 Smart Modules that support worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE bands. They are based on a Qualcomm octa-core and 64-bit ARM v8.0 compliant application processor with a built-in Adreno 610 GPU and have built-in Android OS. These modules are designed to support high performance, various multimedia features, multiple-input multiple-output (MIMO) and Quick Charge 3.0 technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| SATCOM Antenna from 17.7 to 31 GHz with Anti-Jam Capabilities | |
SATCOM Antenna
from ThinKom
|
| The ThinAir GT 1717 from ThinKom is a SATCOM Antenna that operates from 17.7 to 21.2 GHz (Rx) and 27.5 to 31 GHz (Tx). It has been developed to operate on commercial and government networks, including LEO, MEO, GEO, and HEO constellations. This antenna ensures a low probability of intercept/detection and features inherent anti-jam robustness to operate in demanding EMI, EMC, and EMP environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12-Port 4x4 MIMO Base Station Antenna from 617 to 896 MHz | |
Base Station Antenna
from MatSing
|
| The MS-MBA-3-T4A2 from Matsing is a 12-Port Multibeam Base Station Antenna that operates from 617 to 896 MHz (T-Band). This dual-slant polarized antenna provides a gain of 18 dBi and has a VSWR of less than 1.50:1. It has a horizontal beamwidth of 43°, a vertical beamwidth of 25°, and a remote electrical tilt from 0° to 15°. |
| |
Download Datasheet
Product Details | |
|
