| New RF and Microwave Products this Week |
|
|
| 48-Channel Digital Attenuator from 200 to 8000 MHz | |
RF Variable Attenuator
from Vaunix
|
| The LDA-802-48 from Vaunix is a 48-channel Digital Attenuator that operates from 200 to 8000 MHz. This bi-directional attenuator provides up to 120 dB of attenuation with a step size of 0.1 dB and an accuracy of 1 dB. It has a switching speed of 2 us, an insertion loss of less than 11 dB, and a VSWR of 1.50:1. This 50-Ohm attenuator is easily programmable for fixed attenuation, swept attenuation ramps, and user-defined fading profiles directly from the included Graphical User Interface (GUI). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 8-Way 0°/180° Non-Isolating Power Splitter/Combiner from 900 to 930 MHz | |
Power Divider
from Mini Circuits
|
| The COM-G90G9316K+ from Mini-Circuits is an 8-Way 0°/180° Power Splitter/Combiner that operates from 900 to 930 MHz. It is designed to maximize the efficiency of high-power amplifiers and generators working in the ISM 915MHz band. This power splitter has an insertion loss of 0.1 dB, a phase unbalance of 1 degree, and an amplitude unbalance of 0.1 dB. It can handle up to 20 kW of power and has a VSWR of less than 1.22:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Simulate Waveguide Excitations | |
Software
from Remcom
|
| XF offers two waveguide interfaces for exciting a broad range of waveguide structures and transmission lines. Together, XF’s Modal Waveguide capability and Nodal S-parameters provide more accurate solutions for waveguide excitations and allow XF output to be passed to a circuit solver for post-processing. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ultra-Broadband DC Feeder from 13 kHz to 110 GHz | |
Bias Tee
from HYPERLABS
|
| The HL9349 from Hyperlabs is an ultra-broadband DC feeder with a typical insertion loss of 2.5 dB from 13 kHz to 110 GHz. A DC feeder functions similarly to a bias tee, but without a DC blocking capacitor on the RF input. The HL9349 allows for the insertion of a DC bias current or voltage onto the RF circuit path with minimal perturbation of the impedance of a 50 ohm transmission line. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ceramic Chip Inductors from 0.67 to 100 nH | |
RF Inductor
from Coilcraft
|
| The 0302CS Series from Coilcraft are Ceramic Chip Inductors with inductance values from 0.67 to 100 nH. They have a high Q-factor of up to 131 (at 2.4 GHz) and an inductance tolerance of 5 to 10%. These inductors have DC resistances of less than 3.26 Ohms and a current rating of up to 1600 mA. They are 20% smaller in size than Coilcraft’s 0402CS inductors. These RoHS-compliant inductors are available in a compact 0805 package size that measures 0.86 x 0.53 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 6 kW GaN Solid-State Microwave Generator from 2.4 to 2.5 GHz | |
Microwave Generator
from RFHIC
|
| The RIU256K0-40TG from RFHIC is a Solid-State Microwave Generator that operates from 2.4 to 2.5 GHz. It delivers a CW output power of up to 6 kW with an efficiency of 55% and has an optional Pulsed operating mode. The generator is built using RFHIC’s cutting-edge gallium-nitride (GaN) on SiC HEMTs providing excellent thermal stability and power. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 kW Class AB Solid-State Pulsed Power Amplifier from 4 to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP4071P-1KW from Exodus Advanced Communications is a Solid-State Pulsed Power Amplifier that operates from 4 to 6 GHz. It delivers a peak output power of more than 1 kW (pulse width – 100 µs, 10% duty cycle) with a gain of over 60 dB and a gain adjustment range of 20 dB. This SSPA is based on Class AB linear design that provides high efficiency with unprecedented reliability and ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
|
| WR-75 Waveguide to N-Type / SMA Adapter from 10.7 to 12.75 GHz | |
Waveguide to Coax Adapter
from AmpliTech, Inc.
|
| The AA75X-2-1 from AmpliTech is a WR-75 Waveguide Interface to N-Type (female)/SMA Adapter with a frequency range from 10.7 to 12.75 GHz. It has a WR-75 waveguide interface size coupled with a precision tolerance U square cover flange with a gasket groove. The coaxial end of this adapter can be specified to be an N-type female connector or SMA connector. |
| |
Download Datasheet
Product Details | |
|
|
|
| Color Coded Between Series Adapters from DC to 40 GHz | |
Between Series RF Adapter
from Maury Microwave
|
| The ColorConnect™ Precision Adapters from Maury Microwave are a set of unique adapters that use the proposed IEEE high-frequency connector/adapter color convention for clear indications of compatibility and intermatability. The ColorConnect™ precision adapters are available with N-Type, 3.5 mm, 2.92 mm, 2.4 mm and 1.85 mm (in-series and between-series) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Monopulse Comparator from 2.2 to 2.4 GHz | |
Monopulse Comparator
from Quantic PMI (Planar Monolithics)
|
| The PMC-2D22D4-6D8-SFF from Quantic PMI (Planar Monolithics) is a Monopulse Comparator that operates from 2.2 to 2.4 GHz. This monopulse comparator provides an isolation of more than 25 dB and has an insertion loss of less than 6.8 dB. It can handle an average input power of up to 10 W and a peak input power of less than 100 W with a VSWR of less than 1.50:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Resistive Power Divider from DC to 50 GHz | |
Power Divider
from Leader-MW
|
| The LPD-DC/50-2s from Leader-MW is a 2-Way Power Divider that operates from DC to 50 GHz. This resistive power divider can handle an input power of 1 W with a VSWR of less than 1.65:1 and has an insertion loss of less than 2.5 dB. It has an amplitude balance of less than ±0.6 dB and a phase balance of ± 4º. This 50-ohm power divider is available in a module that measures 0.71 x 0.59 x 0.37 inches and has 2.4 mm female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Cavity Bandpass Filter with Passband from 17.255 to 18.585 GHz | |
Band Pass Filter
from Knowles
|
| The 931985 from Knowles Precision Devices is a Cavity Bandpass Filter with a passband from 17255 to 18585 MHz and a center frequency of 17920 MHz. It has a passband insertion loss of less than 1 dBa and provides an out-of-band rejection of more than 35 dBc. This bandpass filter has a return loss of 16 dB and can operate over a temperature of -20 to +70°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ultra-Wideband (UWB) Transceiver IC for Automotive Applications | |
Automotive Radar Chipset
from NXP Semiconductors
|
| The NCJ29D6 from NXP Semiconductors is an Ultra-Wideband (UWB) Transceiver IC that is forward and backward-compatible with IEEE 802.15.4 and IEEE 802.15.4z standards. It has an integrated Arm® Cortex® core & CAN FD controller and a dual antenna interface for antenna diversity, maximum ratio combining, and angle-of-arrival estimation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rack-Mount Shield Test Box from 20 MHz to 12 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-2860-F from RF Electronics is an RF Shield Test Box that operates from 20 MHz to 12 GHz. It is designed and developed for WLAN (802.11a/b/g/n/ac/ax/be) and wireless device testing (Bluetooth, RFID, 3G, 5G FR1). This test box has an internal clear space dimension of 374 x 643 x 473 mm and includes thick RF-absorbing foam material that deadens standing waves and reflections. |
| |
Download Datasheet
Product Details | |
|
|
|
| Active Balun from 40 MHz to 60 GHz for High Data Rate Applications | |
Balun
from SHF Communication Technologies
|
| The SHF BLN60 A from SHF Communication Technologies is an Active RF Balun that operates from 40 MHz to 60 GHz. It converts a single-ended signal into a clean differential waveform with a phase balance of ±2.5° and an amplitude balance of ±0.3 dB. The active configuration amplifies the input signal. This balun has an option for low-frequency compensation (LFC) that reduces the frequency response roll-off. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4.5 W Tabletop Power Amplifier from 20 to 2800 MHz | |
RF Amplifier
from Becker Nachrichtentechnik GmbH
|
| The AMP20280035B-T from Becker RF is a Power Amplifier that operates from 20 to 2800 MHz. It delivers an output power of 4.5 W with a gain of up to 41 dB and provides a reverse isolation of 70 dB. This power amplifier has an integrated highpass filter (HPF) in the input to suppress unwanted signals in the VLF and HF range. |
| |
Download Datasheet
Product Details | |
|
|
|
| Absorptive SPDT Pin Diode Switch from 100 MHz to 4 GHz | |
RF Switch
from Z-COMM
|
| The RFSW30 from Z-Communication Inc. is an Absorptive SPDT Pin Diode Switch that operates from 9 kHz to 30 GHz. It can handle an input power (CW) of up to 24 dBm, provides an isolation of more than 60 dB, and has an insertion loss of less than 3 dB. This switch has a switching speed of 1.1 us and a settling time of 6.2 to 10 us. It requires a DC supply of 5 V and consumes less than 600 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3, 6, 10, and 20 dB Fixed Attenuators from DC to 3000 MHz | |
Fixed Attenuator
from Broadwave Technologies
|
| The 379-372-XXX from Broadwave Technologies are Fixed Attenuators that operate from DC to 3000 MHz. These 75-Ohm attenuators are available with standard attenuation values of 3,6,10 and 20 dB with an accuracy of ± 0.50 dB. They can handle up to 2 W of average input power and have a VSWR of less than 1.30:1. These attenuators are available with F-Type male/female connectors and can operate over a temperature range of – 55°C to +100°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1:2 Low Loss Balun MMIC from 27 to 100 GHz | |
Balun
from mmTron Inc
|
| The TMC813D from mmTron is an Low Loss Balun MMIC that operates from 27 to 100 GHz. This balun converts balanced signals to unbalanced signals with an impedance ratio of 1:2. It has an insertion loss of 3.5 dB and provides a common-mode rejection ratio of 30 dB. This moisture-protected balun has an amplitude balance of 0.8 dB and a phase balance of 1.9°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 W Power Amplifier from 1 to 18 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-HPA-0100-1800-37 from ERZIA is a Power Amplifier that operates from 1 to 18 GHz. It delivers a saturated output power of 36 dBm (~4 W) with a small signal gain of 36 dB. This amplifier requires a DC supply from 18 to 30 V and consumes less than 40 W of power. It is available in a compact aluminum housing that measures 100 x 80 x 21 mm and has SMA female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Field-Proven, Multi-Orbit SATCOM Terminal from 10.7 to 14.5 GHz | |
Electronically Steerable Antenna
from Kymeta
|
| The Goshawk u8 from Kymeta is a Field-Proven, Multi-Orbit SATCOM Terminal that operates from 13.75 to 14.5 GHz (Tx) and 10.7 to 12.75 GHz (Rx). This terminal delivers resilient and flexible connectivity across GEO, LEO, and cellular networks in a single solution. It ensures a reliable and uninterrupted connection for vehicles and vessels on the move to meet various goals on land, sea, or in fixed locations. |
| |
Download Datasheet
Product Details | |
|
|
|
| 7 Gbps Sub-6 GHz 5G SA/NSA Cellular Modules for Korean Market | |
Cellular Module
from Fibocom
|
| The FG370-KR Series from Fibocom are 5G Communication Modules that support 5G Standalone (SA) and Non-Standalone (NSA) architectures for the Korean Region. They deliver a downlink data rate of up to 7.01 Gbps and an uplink data rate of up to 1.25 Gbps. These modules are equipped with an MTK T830 chip based on a 4 nm manufacturing process and have a built-in 4-core ARM Cortex-A55 2.2 GHz CPU. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wi-Fi 7 (802.11be) Front End Module | |
Front End Module
from Qorvo
|
| The QPF7207 from Qorvo is a Wi-Fi 7 (802.11be) Front End Module that operates at 2.4 GHz. It delivers an output Tx power of up to +26 dBm with a gain of 29 dB (Tx) & 15.5 dB (Rx) and has a noise figure of 2.1 dB. This module has a rejection of 60 dB for U-NII bands 1-3 on the Rx path and uses edgeBoost filter technology along with the advantages of active components. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP Release 10-Compliant LTE Cat 4 Modules with 2G Fallback | |
Cellular Module
from Cavli Wireless
|
| The CQS315 (C-Series) from Cavli Wireless are LTE Cat 4 Modules with 2G fallback that are designed to meet a broad range of IoT application requirements. They comply with 3GPP Release 10 standards and are based on Octa-core Kryo 260 CPU and an Adreno 610 GPU, thereby offering enhanced graphics performance, efficient power usage, and high-quality imaging. These modules also consist of up to 64 GB flash memory and 4 GB RAM. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Grade Software-Defined Radio from 600 to 1200 MHz | |
Software Defined Radio
from CesiumAstro
|
| The SDR-2104 from CesiumAstro is a Software-Defined Radio (SDR) that operates from 600 to 1200 MHz. This radio consists of four 1.2 GHz Tx-Rx channels, and a large FPGA that provides functionalities for modem and other baseband processing. It supports TDD and FDD operation for communication and achieves multi-Gigabit/s data rates, depending on the selected DVB-S2(X) modulation and coding scheme. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wi-Fi 6E & 7 Coexistence BAW Filter up to 5.925 GHz | |
Band Pass Filter
from Akoustis
|
| The A10157 from Akoustis is a Wi-Fi 6E & 7 Coexistence BAW Filter that operates up to 5.925 GHz, covering U-NII-2C thru U-NII-4 bands. It has a bandwidth of 405 MHz, provides a low insertion loss, and meets the stringent rejection requirements, enabling coexistence with U-NII-1 thru 2A and U-NII-5 thru 8. This BAW filter can handle the high-power levels required by the latest Wi-Fi 6E & 7 standards. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Grade SiGe Microwave Upconverter from 5.9 to 23.6 GHz | |
RF Upconverter
from Analog Devices
|
| The ADRF6780S from Analog Devices is a Silicon Germanium (SiGe) Microwave Up-Converter that converts input frequencies (IF) from 0.8 to 3.5 GHz to output frequencies (RF) from 5.9 to 23.6 GHz. This upconverter consists of a quad splitter buffer, a log power detector, an LO doubler, a voltage variable attenuator, ADC, bias control, and an SPI interface. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1.85 mm Female Edge Launch PCB Connector from DC to 67 GHz | |
RF Connector
from San-tron
|
| The 5313-01-PJN from Santron is a 1.85 mm Jack Edge Launch PCB Connector that operates from DC to 67 GHz. It has a dielectric withstanding voltage (DWV) of 300 V (RMS) and a VSWR of 1.45:1. This connector can handle up to 500 mating cycles. It measures 0.800 x 0.500 inches and has a passivated stainless steel body, a PTFE insulator, & beryllium copper contacts. |
| |
Download Datasheet
Product Details | |
|
