Latest RF & Microwave Products of the Week (23

DC to 20 GHz Suspended Substrate Stripline Diplexer

The ZDSS-5G6G-S+ from Mini-Circuits is a suspended substrate stripline diplexer that operates from DC to 20 GHz. It has an insertion loss of under 3 dB with more than 20 dB of rejection over the band and a return loss of 8 dB. The Diplexer can handle up to 3 watts of power. It is available in a connectorized module with SMA female connectors and is ideal for radar and test & measurement applications. Click here to view specs.

Wideband Distributed Amplifier Die from 30 kHz to 40 GHz

The MAAM-011275-DIE from MACOM is a wideband distributed amplifier that operates from 30 kHz to 40 GHz. The amplifier provides 15 dB of gain with a noise figure of 5.3 dB and 22 dBm of output power. The input and output pins are matched to 50 ohms with a typical return loss of more than 13 dB. The amplifier requires a positive bias voltage of 6 V and draws 135 mA. It is available as a die and is ideal for a wide range of applications in test & measurement and communication systems. Click here to view specs.

200 W LDMOS Power Transistor for S-band Radar Applications

The BLSC9G2731XS-200 from Ampleon is an LDMOS power transistor that operates from 2.7 to 3.1 GHz. It provides an output power of 200 watts with a gain of 14 dB and drain efficiency of 45%. The transistor requires a supply voltage of 32 V and is ideal for S-Band radar applications. It is internally matched and has high flexibility with respect to pulse output formats. The transistor is available in a flanged ceramic package. Click here to view specs.

GaAs MMIC Double Balanced Mixer from 18 to 50 GHz

The MM1-1850HSM is a double balanced mixer from Marki Microwave with an RF/LO frequency from 18 to 50 GHz and an IF frequency from DC to 21 GHz. This GaAs MMIC mixer provides a wide bandwidth with high linearity in a proprietary surface mount package. It has an IP3 of 17 dBm, an LO drive from 12 to 22 dBm and a conversion loss of 8.7 dB. The mixer has 39 dB LO/RF Isolation and offers excellent spurious suppression. It is ideally suited for electronic warfare, radar, multi-band 5G, and other K/Ka-band applications. The mixer is available in a compact surface mount package. Click here to view specs.

WR-10 Waveguide Junction Isolator from 78 to 86 GHz

The SNW-7838630816-10-CH is a Waveguide Junction Isolator that operates from 78 to 86 GHz. This W-Band Isolator can handle up to 3 watts of CW power with an isolation of 16 dB and insertion loss of 0.8 dB. It offers a much shorter insertion length for system integration. This isolator has a WR-10 waveguide size with UG-387/U-M anti-cocking flanges at the input and output ports. Click here to view specs.

WR-10 Waveguide PIN Diode SPDT Switch from 75 GHz to 110 GHz

The FMSW9004 from Fairview Microwave is a WR-10 Waveguide PIN Diode SPDT Switch that operates from 75 to 110 GHz. The switch has an insertion loss of under 5.5 dB, isolation of 20 dB and a switching speed of 300 ns. It has an integrated TTL-compatible driver circuitry for accurate logic control and requires +5/-5 Voltages for control. The switch uses solder terminals and SMA female control connector and a WR-10 Round Cover with a UG-387/U Flange. Click here to view specs.

0.1 to 18 GHz SP8T Absorptive Switch

The LW24-Series from Linwave is an SP8T Absorptive Switch that operates from 0.1 to 18 GHz. The switch has an isolation of 40 dB and can handle an operational power of up to 20 dBm. The unit provides fast switching of 100nS via a 9 way D shell serial interface. The module measures 106 x 93 x 20 mm and is available with SMA Female connectors. It is ideal for electronic warfare, RF broadband receivers and test & measurement applications. Click here to view specs.

SP32T Absorptive from 0.5 to 43.5 GHz

The RFSP32TA5M43G from RF-Lambda is a SP32T Switch that operates from 0.5 to 43.5 GHz. It can handle up to 0.5 watts of CW power. The switch has a switching speed of 70 ns. It requires +5V/-5V biasing and is available in a circular module with SMA - Female input and output connectors. Click here to view specs.

Ultra-Low Noise Amplifier from 2-6 GHz (S, C, Band)

The CMD283 is a broadband MMIC low noise amplifier that operates from 2 to 6 GHz (S, C - Band). The device delivers 27 dB of gain with a corresponding noise figure of 0.6 dB at 4 GHz and saturated output power of 18 dBm. It is ideally suited for EW and communications systems where small size and low power consumption are needed. The CMD283 is a 50 ohm matched design which eliminates the need for external DC blocks and RF port matching. It is available as a die. Click here to view specs.

150 W, 90 Degree Hybrid Coupler from 20 to 1000 MHz

The IPP-2247 from Innovative Power Products is a 90 degree hybrid coupler that operates from 20 to 1000 MHz. The coupler can handle up to 150 watts of power and has a VSWR of 1.30:1. It has a low insertion loss of 0.9 dB and high isolation of over 16 dB. The coupler is available in a compact drop-in package that measures 2.20 x 3.00 inches. Click here to view specs.

50 W Fixed Attenuators from DC to 18 GHz

The 50W SMA Series from Response Microwave is a family of fixed attenuators that operate from DC to 18 GHz. They have attenuation up to 50 dB, an insertion loss of 0.5 dB and a VSWR under 1.45:1. These attenuators can handle 50 W of CW power and are suitable for Lab and both military and telecom-specific product platform use. They are available in a package that measures 0.64 x 0.110 mm with SMA male/female connectors. Click here to view specs.

Ku-Band Block Upconverter from 13.75 to 14.5 GHz

The 01-320A from EM Solutions is a Ku-Band Block Upconverter. It has an RF Frequency from 13.75 to 14.5 GHz and an IF Frequency from 950 to 1700 MHz. The BUC has an output power of 44 dBm with a gain of up to 55 dB (Gain can be controlled in 0.25 dB steps). It has excellent phase noise and requires an external power supply of 24 or 48 V. This BUC has an RS485 Interface through which it can be controlled. It is available in a compact module that measures 6.3 x 3.1 x 2.75 inches. Click here to view specs.

Compact USB VNA from 9 kHz to 6.5 GHz

The S5065 is a compact 2 port VNA that operates up to 6.5 GHz. It can be controlled using a software application which runs on a Windows PC, laptop, or tablet, connecting to the measurement hardware via USB interface. The application can be installed on multiple computers, making it easy to share the use of the analyzer measurement module. The S5065 can measure all four S parameters S11, S12, S21, S22 and provides a wide variety of analysis capabilities, including time-domain with gating and frequency offset modes, at no additional cost. Collection of metrology-grade S-parameter test results can be achieved manually or through automation in Python, MATLAB, Excel, C++, or LabVIEW. Click here to view specs.

250 W Chip Terminations from DC to 2 GHz

The PPC375-375AG2 from API Inmet are chip terminations that operate from DC to 2 GHz. They can handle up to 250 Watts of power and have a VSWR of 1.50:1. The chips are fabricated on a Berylium Oxide Ceramic substrate with a thin film resistor. These terminations are available in standard impedance values of 50 and 100 ohms in a surface mount package. Click here to view specs.

Dual-band 802.11 b/g/n Wi-Fi, Dual-mode Bluetooth 5 and 802.15.4 SoC

The RS9116N-DBT0-BRS is a Dual-band 802.11 b/g/n Wi-Fi, Dual-mode Bluetooth 5 and 802.15.4 (capable of running Thread or ZigBee) SoC for smart home devices such as smart locks, security cameras, home appliances, alarm systems and doorbells. The SoC integrates dual-band Wi-Fi, Bluetooth 5, and 802.15.4 with ARM Cortex M4 MCU and advanced security hardware. It contains full protocol stacks for Wi-Fi, BT, BLE, ZigBee and Thread, and includes automated mesh formation and reconfiguration capability to provide robust, whole-home coverage. The module has a unique wireless wake-up receiver that remains on at a few microamps of current and be ready to wake up the rest of the device only when required, triggered by specific incoming wireless signals. It consumes less than 113 uA for maintaining cloud connection over Wi-Fi and can provide four years of battery life when used with a battery operated smart device. The SoC has the ability to stream data at up to 100 Mbps combined with its ...Click here to view specs.

GNSS SMD Active Antenna with Integrated LNA and Filter

The RADIONOVA M20057-1 from Antenova is an active antenna module for GNSS applications from 1559-1609 MHz. It supports GPS, GLONASS, GALILEO and BeiDou constellations. The antenna module consists of an SMD antenna with built-in active components: an LNA and SAW filter to boost antenna performance in environments where there is a restricted view of the sky or where line-of-sight to the horizon is difficult. It is available in a 7 x 7 x 0.9 mm surface mount package and is ideal for small positioning devices where space on the PCB is tight, for example in wearable devices, asset tracking, sports cameras and equipment, and smartwatches. There is also an external matching feature to compensate for any de-tuning of the antenna caused by proximity to other components, such as a plastic case or a battery. Click here to view specs.

Outdoor 2x2 MIMO Antenna for 4G and 5G Frequency Bands

The SENCITY Urban 100 is an outdoor 2x2 MIMO antenna that covers both 4G and 5G high-frequency ranges (2500 to 2690 MHz / 3410 to 4200 MHz). It is available in two models - omnidirectional and directional. This antenna delivers a gain of up to 7 dBi and provides high isolation between ports and very low PIM. It is compact enough for discreet installation in different types of street furniture, such as bus shelters, poles or walls, depending on the location. The antenna measures 96 x 117 mm, weighs 0.45 kg and is ideal for communication applications. Click here to view specs.

Programmable OEM RFID Module with NFC Support

The TWN4 MultiTech Nano LEGIC 42 is a Programmable OEM RFID module with NFC support. It allows users to read and write to almost any 125 kHz, 134.2 kHz, and 13.56 MHz tag and/or label, supporting all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID, LEGIC, etc. and ISO standards like ISO14443A/B (T=CL), ISO15693, ISO18092 / ECMA-340 (NFC). This module measuring 31 x 17.8 x 2.7 mm has a LEGIC chip for reading LEGIC RFID standards. It is designed for integration into machines or other devices and can be connected to an external antenna through a printed circuit board. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (23 - 29 May, 2019)