Latest RF & Microwave Products this Week(12

Ultra Low-profile DAS Antenna for Public Safety Applications

The CFSA35606P is a low PIM, ceiling mounted omni-directional antenna optimized for indoor DAS coverage from 350 to 6000 MHz. It covers the 350-520, 600-960, 1350-1550, and 1690-6000 MHz bands for the UHF, 4G LTE, 2G/3G Cellular, UMTS/AWS-3, CBRS, and Wi-Fi applications. The antenna provides a gain of up to 7.3 dBi and can handle an input power of up to 50 watts. This ultra low-profile DAS antenna is just 7.6 mm thick, engineered specifically for public safety and FirstNet applications. Click here to view specs.

65 to 115 GHz Cryogenic Low Noise Amplifier

The LNF-LNC65_115WB is a Cryogenic Low Noise Amplifier that operates from 65 to 115 GHz. It provides a gain of 23 dB with a noise figure of 0.4 dB. The LNA is available in a waveguide module that measures 14.92 x 23 x 19.20 mm with standard WR10 and Nano-D Interface. Click here to view specs.

2.025 to 2.40 GHz LNAs for Earth Station Receiver Applications

The ALNA-S Series of Low Noise Amplifiers operate from 2.025 to 2.400 GHz in the S-band. These low noise, high dynamic range amplifiers are suitable for use in satellite earth station receiver applications where ultra-low noise and high reliability are critical. The LNAs provide a gain of over 50 dB with an output power of more than 10 dBm and Noise Temperature ranging from 50° K to 70° K. Click here to view specs.

Cryogenic Amplifier from 1 to 500 MHz

The APTC3-1M500M-1000-D6-V from AmpliTech is a Cryogenic Amplifier that operates from 1 to 500 MHz. It provides an output power of 0 dBm and gain of 20 dB with a noise figure of 1 dB. The amplifier requires a supply of 10 Vdc while consuming 31 mA of current. It is available in a drop-in package with SMA female connectors. Click here to view specs.

Ku-Band WR75 High Power Waveguide Circulators

The SpaceNXT Ku Series from Smiths Interconnect is a family of high power WR75 circulators operating from 10.70 to 12.75 GHz. The Series is specifically designed for MEO/GEO satellites and offered with recognized testing sequences in order to reduce delivery times and overall cost of ownership. The devices demonstrate low and stable insertion loss characteristics under maximum power. They are well sealed for electromagnetic compatibility (EMC) and constructed with a low mass-aluminum housing with chromate finish. Click here to view specs.

Multi-Channel Signal Generator from 9 kHz to 3 GHz

The IZT S1010 from IZT is an advanced Digital Signal Generator that operates from 9 kHz to 3 GHz with an instantaneous bandwidth of up to 120 MHz. It has 31 virtual signal generators in one device. This compact multi-channel platform can simultaneously simulate a test environment with multiple sources and can stream multiple signals in parallel with a cumulative bandwidth of up to 320 MS/s. The output signals of all active Virtual Signal Generators are combined and distributed to two independent RF outputs. The IZT S1010 replays recorded or simulated signals with up to 40 MS/s at 12- or 16-bit complex resolution. The user can also generate plain I/Q data using system simulations from Matlab, LabVIEW etc. It is available in a compact 2U form factor chassis that measures 443 x 41.6 x 430 mm with high-resolution display and front panel keyboard. The chassis contains all digital processing hardware, synthesizers and RF sections. Click here to view specs.

Base Station Analyzer from 9 kHz to 8 GHz

The VIAVI CellAdvisor JD786B Base Station Analyzer that combines the functionality of spectrum analysis, cable and antenna analysis, and power measurements into a single device. The spectrum analyzer operates up to 8 GHz, cable and antenna analyzer up to 6 GHz and the power meter up to 8 GHz. The analyzer offers dual-port capability, cable and antenna analysis / spectrum analysis / interference analysis / signal analysis / demodulation and RF / optical power meters and optional fiber inspection in a rugged, portable, cloud-enabled instrument. Click here to view specs.

10 MHz to 26 GHz Real-Time Phase Noise Analyzer

The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. The HA7062D has a high speed digital processor for speed, but the proven accuracy and speed starts with the analog front end. A key component of the analog front end is a pair of Holzworth HSX Series RF Synthesizers as the test system’s internal LOs. Click here to view specs.

GSM, UMTS, LTE Antenna Booster for Wireless Devices

The FR01-S4-232 from Fractus Antennas is a multiband antenna booster that operates in the GSM, UMTS and LTE Bands (698 - 798 MHz, 824 - 960 MHz and 1710 - 2690 MHz). It delivers a gain of up to 2.9 dBi with an efficiency of more than 50%. This linearly polarized device is built on a glass epoxy substrate measuring 10 x 3.2 x 3.2 mm and is ideal for wireless devices (mobile phones). Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products this Week(12 - 18 Dec, 2018)