Latest RF & Microwave Products this Week(24-30 Oct, 2018)

Affordable Super Flexible Armored Test Cables up to 6 GHz

The P2RFC-2746-39 from RF Industries is a 1 meter N male to N male super flexible armored test cable. The cable can operate up to 6 GHz and has a propagation velocity of 70% and an insertion loss less than 2.5 dB. The test cable features a robust strain relief to counter the primary failure mode of the connector to cable junction. Click here to view specs.

RF Shielded Test Enclosure from 20 MHz to 6 GHz

The HDRF-7370 from RF Electronics is a Standalone Portable RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This fully portable design is equipped with caster wheels for ease of movement. It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. Click here to view specs.

GNSS Front-End Module with Integrated Pre-Filter and Post-Filter

The SKY65933-11 is a front-end module for GNSS applications with an integrated low-noise amplifier (LNA), pre-filter, and post-filter. The pre-filter and post-filter provide low in-band insertion loss and excellent rejection for the cellular, PCS, and WLAN frequency bands. The FEM operates from 1559 to 1606 MHz and consumes only 2.9 mA of current from a 1.8 V. Click here to view specs.

Bias Tee from 30 kHz to 85 GHz

The BT-55-401D from Pulsar Microwave is a Bias Tee that operates from 30 kHz to 85 GHz. It has an insertion loss of under 4 dB, an isolation of over 30 dB and a VSWR of 2.00:1. The Bias Tee can handle an input RF power of up to 1 watts and max DC levels of 25 VDC. It is available in a module that measures 1.42 x 0.60 x 0.50 inches with 1.85 mm connectors. Click here to view specs.

2000 W Pulsed Power Amplifier from 1.2 to 1.4 GHz

The KNP1300M63A from KeyLink Microwave is an L-band high power pulsed amplifier module that operates from 1.2 to 1.4 GHz. This amplifier provides a pulse width of up to 50 uS with a duty cycle of up to 10%. It delivers a peak output power of 2000 watts into a 50 ohm load, while operating over a 50 V supply. Click here to view specs.

UltraCMOS Passive Mixer with Integrated LO Amplifier

The PE4151 from pSemi is an UltraCMOS passive mixer with an integrated LO amplifier that operates from 136 to 520 MHz. This ultra-high linearity quad metal-oxide-semiconductor field-effect transistor (MOSFET) mixer is designed for use in upconversion and downconversion applications and is ideal for highly magnetic environments such as medical applications. Click here to view specs.

4 Way Waveguide Power Divider from 26.5 to 35 GHz

The SWP-27335304-28-E1 from SAGE Millimeter is a 4 Way Waveguide Power Divider that operates from 26.5 to 35 GHz. This Ka-Band in-line waveguide power divider has a typical insertion loss of 0.5 dB at each output port and a typical isolation of 25 dB. The ports are well balanced and in phase for either power dividing or power combining applications across the specified frequency range. Click here to view specs.

2-Port Vector Network Analyzer from 10 MHz to 26.5 GHz

The R4226 is a high performance Vector Network Analyzer from Micran that operates from 10 MHz to 26.5 GHz. This two port analyzer has a high dynamic range of 145 dB at 1 Hz IF Bandwidth and a wide power range from -90 to 15 dB. It uses a modular approach and can be controlled by a software program installed on a computer. Click Here to View Specs.

4-Bit Silicon Digital Attenuator from 100 MHz to 40 GHz

The ADRF5731 from Analog Devices is a 4-Bit Silicon Digital Attenuator that operates from 100 MHz to 40 GHz. This attenuator has a 30 dB range with a step size of 2 dB. It has an insertion loss of less than 3.5 dB, and can handle up to 26 dBm of average power and 30 dBm of peak power. The ADRF5731 requires a dual supply voltage of +3.3 V and -3.3 V. Click here to view specs.

Low Phase Noise OCXO from 500 to 1300 MHz

The O-CEGM-0XXXXXX-X from NEL Frequency Controls is an OCXO that operates from 500 to 1300 MHz with a frequency stability of ±50 ppb. It provides an extremely low phase noise of -145 dBc/Hz at a 10 kHz offset with a 12 dBm sine-wave output. The OCXO requires a 5 V supply and has low G-sensitivity of 0.5 ppb/G. Click here to view specs.

Ku-Band Space Qualified Isolator from 13.75 to 14.80 GHz

The DS1011 from DiTom is a Ku Band Space Qualified Isolator that operates from 13.75 to 14.80 GHz. It has an isolation of over 20 dB, an insertion loss of under 0.4 dB and can handle up to 10 watts of forward power. The isolator is available in a module that measures 0.5 x 0.7 x 0.5 inches with SMA female connectors. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products this Week(24-30 Oct, 2018)