Latest RF & Microwave Products this Week(26 Sept-2 Oct 2018)

Two-Port 45-degree Sector Antenna from 4.9 to 6.4 GHz

The N5-45x2 from Mimosa is a two port, dual-slant polarization 45-degree sector antenna that operates from 4.9 to 6.4 GHz. This antenna is custom-engineered to deliver a high-gain of up to 19 dBi, 42º half-power beamwidth with non-existent side lobes and an unprecedented 43 dB front-to-back (FTB) ratio. It can handle an input power of up to 30 dBm and works with any third party 2x2 MIMO radio. This antenna uses metalized end-caps and a precision engineered backplate extrusion to improve noise rejection. The antenna measuring 427 x 143 x 76 mm is available with N-type female connectors and is ideal for public safety networks, fixed 5G deployments, high-speed internet and camera connectivity applications. click here to view specs.

2 W Variable Step Attenuator from DC to 2.5 GHz

The 685-50-1 from MECA is a variable step attenuator that operates from DC to 2.5 GHz. The attenuator has an attenuation range of 0 to 50 dB in 1 dB steps. It has an insertion loss of under 1 dB and can handle an average input power of up to 2 watts. This attenuator is available in a module with N-type female connectors. Click here to view specs.

SMD TCXO from 16.368 to 38.4 MHz

The IQXT-225 from IDQ is a Temperature Controlled Crystal Oscillator (TCXO) that operates from 16.368 to 38.4 MHz. It requires a supply voltage of 1.2 V and has a clipped sinewave output with 10 kOhm//10pF drive capability. The TCXO has a phase noise of -135 dBc/Hz at 1 kHz and operates over a temperature range of -30ºC to 85ºC. It is available in a 2 x 1.6 mm hermetically sealed package with E/D on pad 1 for low power operation. Click here to view specs.

Compact FEM for Wi-Fi 802.11b/g/n/ac/ax Systems

The QPF7221 is a compact front end module (FEM) for Wi-Fi 802.11b/g/n/ac/ax systems. The FEM integrates a 2 GHz power amplifier (PA), SPDT switch and bypassable low noise amplifier (LNA) and an Rx BAW filter into a single device. It provides state of the art LTE coexistence Rx immunity for maximum range and coverage by integrating high-performance temperature stable BAW filtering on receive chain. The QPF7221 requires a 5V supply without any modifications to the supply lines and performance is a balance of maximizing on highest linear output power and leading-edge throughput. The small form factor and integrated matching minimizes layout area in the application and greatly reduces the number of external components. Click here to view specs.

Real-Time Spectrum Analyzer with GNSS Capabilities

The R5700 from ThinkRF is a handheld/portable Real-Time Spectrum Analyzer with built-in GNSS capabilities for mobile wireless situational awareness applications such as drive testing, coverage mapping, propagation analysis, direction finding & transmitter localization and vehicle-based spectrum monitoring. This analyzer can analyze signals up to 27 GHz with a real-time bandwidth of 100 MHz and has stream rates of 28 GHz/s. Click here to view specs.

10W L & S-Band Solid State Power Amplifier from 1.5 to 2.5 GHz

The 12B01A-07 from NuWave Engineering is a 10 watt CW solid state power amplifier that operates from 1.5 to 2.5 GHz. This GaN amplifier has a PAE of 30% to 50% and gain of 40 dB. It is available in a compact module that measures 3.00 x 2.00 x 0.65 inches with SMA female connectors. This amplifier is ideal for broadband RF telemetry, Unmanned Ground Vehicles, software defined radios and tactical communication systems. It has an over-voltage and reverse-voltage protection and can operate over a wide temperature range of -30 °C to +60 °C. Click here to view specs.

860 to 930 MHz RF Front-End Module

The SKY66423-11 is a highly integrated RF front-end module designed for high-power Industrial, Scientific, Medical (ISM) band applications operating in the 860 to 930 MHz frequency range. It is designed for ease of use and maximum flexibility with fully matched 50 Ohm TX, RX inputs and antenna outputs. It also has digital controls compatible with 1.6 to 3.6 V CMOS levels. The RF blocks operate over a wide supply voltage range from 2.0 to 4.8 V allowing the FEM to be used in battery powered applications. The SKY66423-11 is available in a 16-pin, 3.0 x 3.0 x 0.75 mm Multi-Chip Module (MCM) package and is suitable for IoT, smart meters, LP-WAN devices and Industrial applications. Click here to view specs.

W1 Coaxial Precision Directional Coupler from 20 to 110 GHz

The MN25110A is a precision directional coupler that operates from 20 GHz to 110 GHz. It is equipped with Anritsu's Trademarked W1 connectors (1.0 mm compatible) that achieve the smallest possible reflections and have a very low broadband insertion loss. The MN25110A is scalable, allowing users access to broadband measurements through E, V and W band. The native W1 coaxial interface removes the need for adapters between uncommon interfaces by allowing users to directly connect to coaxial instrument test ports. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products this Week(26 Sept-2 Oct 2018)