Latest RF & Microwave Products this Week(29 Aug

Low Power OCXOs from 10 to 60 MHz

The LP series from Bliley Technologies are OCXOs with a frequency range from 10 to 60 MHz. These Low Power Crystal Oscillator Series offers excellent frequency versus temperature in a compact package for applications where size and power are a concern. The LP OCXO's achieve a low startup power while maintaining a fast warm-up of less than one minute. They require a supply voltage of 3.3/5V and provide a Sine or CMOS waveform output. The OCXO's are available in a 20 x 20 mm surface mount package. Click here to view specs.

X-Band Power Amplifier from 8.5 to 9.8 GHz

The ERZ-HPA-0850-0980-53 from ERZIA is a pulsed High Power Amplifier that operates from 8.5 to 9.8 GHz. This GaN power amplifier is designed for Radar applications in the X-band. It provides a saturated output power of 250 W with a power gain of over 36 dB. The amplifier requires a supply voltage of 50 V DC. It is available in a compact aluminum housing that measures 204.9 x 139.3 x 29 mm with SMA female / N-type female connectors. Click here to view specs.

Cryogenic Amplifier from 0.001 to 0.5 GHz

The APTC3-1M500M-1000-D6-V from AmpliTech is a Cryogenic Amplifier that operates from 1 to 500 MHz. It provides an output power of 0 dBm and gain of 20 dB with a noise figure of 1 dB. The amplifier requires a supply of 10 Vdc while consuming 31 mA of current. It is available in a drop-in package with SMA female connectors. Click here to view specs.

18 to 40 GHz RF Isolator Handles Up to 5 Watts

The D3I1840 from DiTom is a RF Isolator that operates from 18 to 40 GHz. It has an isolation of over 9 dB, an insertion loss of under 2.1 dB and can handle up to 5 watts of forward power, 2 watts of reflected power and 30 watts of peak power. The isolator is available in a module with K Type connectors. Click here to view specs.

Low Noise Amplifier from 50 to 1000 MHz

The HILNA G2V1 from NuWaves Engineering is a low noise amplifier that operates from 50 to 1000 MHz. It provides a gain of 40 dB with an OIP3 of +32 dBm and a noise figure of less than 1 dB. The HILNA G2V1 can be used up to 2000 MHz with a lower gain of 28 dB. It is available in a COTS module that measures 3.15 x 3.92 x 1.18 inches, with or without mounting flanges and is ideal for ultra low noise applications, military radios and test & measurement applications. Click here to view specs.

15/20 W Solid-State Power Amplifier from 0.7 to 18 GHz

The 15/20S1G18B is a portable, self-contained, air-cooled, dual-band, solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. It provides an output power of up to 20 watts while operating over a frequency range from 0.7 to 18 GHz. The amplifier is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The digital display on the front panel indicates control status and reports of internal amplifier status. It has built-in IEEE-488 (GPIB), RS-232, USB & Ethernet interfaces. Click here to view specs.

GPS/GLONASS/Galileo/Compass Low-Noise Amplifier

The SKY65623-682LF from Skyworks is a MMIC front-end low-noise amplifier designed for Global Navigation Satellite System (GNSS) radio receiver applications. It delivers a gain of 16.5 dB with an IIP3 of -11.5 dBm and has a noise figure of 0.85 dB while operating from 1559 to 1606 MHz. The device requires a supply voltage of 1.5 to 3.6 volts while consuming only 1 mA of current and has a low shutdown current of 0.1 µA. It is available in a 0.8 x 0.8 mm surface mount, QFN package and is ideal for GPS/GLONASS/Galileo/Compass radio receivers, smartwatches and action camera applications. Click here to view specs.

10 W GaN power Amplifier from 4.4 to 5 GHz

The TA4002R from TraidRF is a class AB GaN power amplifier module that operates from 4.4 to 5 GHz. It provides a saturated output power of 40 dBm and a gain of 23 dB while operating from a 12 V supply. This Power Amplifier has been designed for both military and commercial applications. It is capable of supporting any signal type and modulation format, including but not limited to 3G/4G telecom, WLAN, OFDM, DVB, and CW/AM/FM. This amplifier is available in a small, lightweight package that measures 2.73 x 2.53 x 1.313 inches with SMA female connectors. Click here to view specs.

Automotive Radar Echo Generator

The R&S AREG100A automotive radar echo generator reliably tests radar sensors in the 24 GHz ISM band and in the E band at 77 GHz or 79 GHz. It simulates echoes of up to four artificial target objects at fixed distances. User-configurable Doppler offsets can optionally be applied to simulate the radial movement of the objects. It supports bandwidths up to 4 GHz in the E band and can simulate objects at a minimum distance of 4 m if the distance between the frontend and the DUT is 80 cm. The R&S AREG100A provides calibrated input and output ports in the IF band for the execution of the tests specified in the RED standard ETSI EN 303396. Click here to view specs.

Coaxial SP16T Switch from 0.5 to 43.5 GHz

The RFSP16TA5M43G from RF-Lambda is an absorptive coaxial SP16T Switch that operates from 0.5 to 43.5 GHz. It can handle up to 0.5 watts of CW power and has a switching speed of below 70 ns. The switch has an insertion loss of 14 dB and an isolation of over 50 dB. It requires +5V/-5V biasing and is available in a circulator module with SMA - Female input and output connectors. Click here to view specs.

Temperature Compensated Directional Power Detector from 10 to 30 GHz

The MACP-010573 from MACOM is a Temperature Compensated Directional Power Detector that operates from 10 to 30 GHz. This detector can detect an RF signal from -18 dBm to 30 dBm. It has integrated low loss directional couplers and built-in temperature compensation circuits to provide an easy way to monitor the power of a signal traveling in a specific direction along a transmission line. The detector requires a voltage of 3.2 V and draws a current of 0.5 mA while operating. It is available in a compact surface mount, leadless plastic package. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products this Week(29 Aug - 4 Sept, 2018)