Latest RF & Microwave Products this Week(5 - 11 Dec, 2018)

View Slideshow»

Latest RF & Microwave Products this Week(5 - 11 Dec, 2018)

This slideshow consist of Latest RF & Microwave Products this Week(5- 11 Dec, 2018)

View Slideshow

High Directivity Bridge Coupler from 2 MHz to 26 GHz

The CBR17-0026 from Marki Microwave is a Bridge Coupler that operates from 2 MHz to 26 GHz. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss. The coupler has a coupling value of 17 dB and a directivity of 23 dB. It can handle an input power of up to 1 watt and has a low VSWR of 1.22:1. The CBR17-0026 is available in a module with SMA female connectors. Click here to view specs.
Tunable Bandpass Filters from 30 to 520 MHz

The MINI-ERF Series from Pole/Zero are tunable bandpass filters with a pass band from 30 to 520 MHz. These filters can be tuned to have a bandwidth of 24.5 to 39.2 MHz with an insertion loss of 3.5 to 7 dB. The filters have a tuning speed of 15 us and can handle up to 1 watt of power. They are ideal for Military radios, radars, SATCOM, T&M Equipment and ISM Band equipment. Click here to view specs.
Low Noise Amplifier from 1 to 8 GHz

The PE2-26-1G8G-2R0-15-12-SFF from PMI-RF is low noise amplifier that operates from 1 to 8 GHz. It has a gain of 23 dB and a noise figure of 2 dB. The LNA requires a 12-15 V supply and draws up to 200 mA of current. It is available in a module with various connector options. Click here to view specs.
5.6 GHz Co-Existence BAW RF Filter for Wi-Fi Applications

The AKF-1256 from Akoustis is a 5.6 GHz co-existence BAW RF filter for high-speed Wi-Fi applications. It provides low insertion loss covering the U-NII-2C and U-NII-3 bands (mid-point - 5.66 GHz) and addresses the stringent rejection requirements enabling coexistence with the U-NII-1 and U-NII-2A bands. The filter can handle an input power of up to 30 dBm and has an ultra-wideband passband covering 345 MHz. Click here to view specs.
Traveling Wave Amplifier from 40 MHz to 65 GHz

The MMA036AA is a seven stage traveling wave amplifier that operates from 40 MHz to 65 GHz. It provides a P1dB of 11 dBm (14.5 dBm pSat) with a gain of 10 dB and flatness of less than 2 dB. The MMA036AA integrates a temperature-referenced power detector for power monitoring and operates over a 4.5 V supply while drawing 85 mA of current. It is ideal for Test & Measurement equipment, EW & Radar equipment, Microwave Signal Sources / Synthesizers, Fiber Optic Modules and other wideband microwave signal chains. This TWA is offered on 100% DC, RF and visually tested die measuring 64.6 x 36.2 mils. Click here to view specs.
1200 W Pulsed Power Amplifiers from 0.4 to 2.5 GHz

The AMP1145P-A-B from Exodus Advanced Communications are solid state high power amplifiers that operate from 0.4 to 2.5 GHz. These amplifiers have been developed for pulse applications and delivers a peak output power of up to 1200 Watts with 10% duty cycle, a pulse width of 100 µsec and a rise/fall time of less than 75 nsec. They provides a gain of up to 60 dB with 2 dB flatness across the frequency band. Click here to views specs.
High Phase Stability Cable Assemblies for T&M Applications

The MWX071 is a cable assembly from Junkosha that offer excellent phase stability against temperature fluctuations and bending up to 70 GHz. The cable assembly can be fitted with 1.85 mm M/F connectors and is ideal for connecting to vector network analyzers for precision measurements. Click here to view specs.

Advertisement

Need Help Finding a Product?