Radio-Frequency Identification (RFID) is the use of radio waves to read and capture information stored on a tag attached to an object. RFID technology revolutionized supply chains and logistics across the globe. everything RF started focusing on RFID in 2020 with the addition of 5 Main Categories - RFID Tags, RFID Tag ICs, RFID Readers, RFID Reader Modules, RFID Reader ICs and RFID Antennas. We tried to list the leading/all manufacturers in each category. This section got some good traction. Below we have listed the top 10 most viewed RFID products on everything RF in 2020.
EOs-430 U8: 860 to 960 MHz RFID Paper Sticker for Retail Market Applications
The EOs-430 U8 from Tageos is an EPC Class 1 Gen 2 RFID Paper Sticker that operates from 860 to 960 MHz (FCC 902 - 928 MHz / ETSI 865 - 868 MHz / ASIA 950 - 956 MHz). The paper sticker has 128 bits of EPC memory and is based on NXP Ucode 8 IC. It measures 74 x 17 mm and is ideal for retail and apparel market as well as for logistics and industrial applications. Click here to read details about the EOs-430 U8.
R420: RAIN RFID Reader Supporting up to 32 Antennas
The R420 from Impinj is a RAIN RFID Reader with 4 Antenna Ports, extendable up to 32 antennas with the Impinj Antenna Hub that supports short and long-range reads. The reader has exclusive operational modes for high throughput, high tag density use cases and patented AutoPilot technology that automatically optimizes the reader's operation for its environment. It provides up to 1100 tag reads per second and has a receive sensitivity of under -84 dBm.The reader measures 7.5 x 6.9 x 1.2 inches, weighs 0.7 kg and is ideal for Inventory management and asset tracking applications. Click here to read details about the R420.
EM4325: 4 kbit Read/Write Passive or Battery-Assisted Gen2 RFID IC
The EM4325 from EM Microelectronic is a Gen2 RFID IC that is compliant with ISO/IEC 18000-63 and ISO/IEC 18000-64 (TOTAL). The chip can be either battery powered or beam powered by the RF energy transmitted from a reader. It includes 4096 bits of high-speed non-volatile memory (EEPROM) that is organized into 64 pages with 4 words per page. The chip supports either ISO or EPCTM data structures that are compliant with EPCglobal Tag Data Standards, Version 1.10, and is delivered with a Unique Identifier (UID) to ensure full traceability. It supports programmable duty cycle control, auto-switching between a battery powered and beam powered operation, and programmable enable/disable of an ultra-low power mode for extended storage applications. It is ideal for RFID tags and RFID front end for embedded applications. Click here to read details about the EM4325.
Higgs-9 IC: High Capacity EPC Class 1 Gen 2 RFID Tag IC
The Higgs-9 IC from Alien Technology is an EPC Class 1 Gen 2 RFID Tag IC that operates from 840 to 960 MHz. This chip has a read sensitivity of up to -22.5 dBm and a write sensitivity of up to -19 dBm. Incorporating the Higgs Sentinel™ Memory platform, it provides superior write accuracy, memory retention and read reliability under the most extreme conditions. The IC provides a base 96-bit EPC field and a 688-bit User Memory field which is relocatable to the EPC field for applications requiring an expanded EPC. The Higgs-9 IC is ideal for a dynamic memory structure, aviation, automotive and high sensitivity applications. Click here to read details about the Higgs-9 IC.
ZBR4000: UHF RAIN RFID Inlay for Case, Pallet, Freight, and Asset Tracking Applications
The ZBR4000 from Zebra is a UHF RAIN RFID Inlay that operates from 865 to 868 MHz (ETSI) and 902 to 928 MHz (FCC). It has a read range of up to 20 meters and can be read from almost any angle. This inlay has a read sensitivity of up to -23 dBm and a write sensitivity of up to -18 dBm. The inlay is based on NXP’s UCODE 8 chip and has an EPC memory of 128 bits and a TID memory of 96 bits (48 bit unique).This inlay is EPC Gen 2v2, ISO 18000-63 certified and measures 1.38 (H) x 3.58 (W) inches and is suitable for case, pallet, freight, and asset applications. Click here for more details on the ZBR4000.
eNUR-05WL2: UHF RFID Reader/Writer PCB Embedded Module
The eNUR-05WL2 from Nordic ID is an RFID module embedded on a PCB board that operates from 865.6-867.6 MHz (ETSI) and 902 to 928 MHz (FCC/IC). It is fast and easy to implement into new or existing designs, eliminating the fine pitch placement of SMD components and reducing the overall cost. Using this module makes developing RFID Readers every easy.This module provides an output power of +27 dBm, adjustable in 1 dB steps and has a read speed of 200 tags/sec. It requires a 3.6 VDC supply voltage. Click here to read details about the eNUR-05WL2.
LXTBKZMCMG-010: UHF RFID Tag for Surgical Instruments
The LXTBKZMCMG-010 from Murata is a small RFID tag for surgical instruments that can be used on metal surfaces. Operating from 865 to 928 MHz, this Impinj Monza R6P IC-based RFID tag complies with ISO18000-63 and EPC Global Gen2v2 specifications. It has an EPC memory of 128 bits and user memory of 32 bits. The Tag IC measures 6 x 2 x 2.3 mm and has a read range of up to 150 cm on metal. Click here to read details about the LXTBKZMCMG-010.
TWN4 MultiTech Nano LEGIC 42: Programmable OEM RFID Module with NFC Support
The TWN4 MultiTech Nano LEGIC 42 from Elatec is a Programmable OEM RFID module with NFC support. It allows users to read and write to almost any 125 kHz, 134.2 kHz, and 13.56 MHz tag and/or label, supporting all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID, LEGIC, etc. and ISO standards like ISO14443A/B (T=CL), ISO15693, ISO18092 / ECMA-340 (NFC). This module measuring 31 x 17.8 x 2.7 mm has a LEGIC chip for reading LEGIC RFID standards. It is designed for integration into machines or other devices and can be connected to an external antenna through a printed circuit board. Click here to read details about the TWN4 MultiTech Nano LEGIC 42.
DS004342-01:Battery-Free RFID Tag with Built-in Temperature Monitoring
The DS004342-01 from Omni-ID is a battery-free RFID Tag with a built-in temperature sensor. It operates from 866-868 MHz (EU) and 902-928 MHz (US). This RFID tag has a read range of up to 3.5 m (Fixed reader) and up to 2 m (Handheld reader). It has an EPC and user memory of 128 bits, and a TID memory of 64 bits. The EPC Class 1 Gen2v2 qualified RFID tag measures 13.1 × 8.05 × 3.1 mm, including the IC bump. It is suitable for equipment monitoring in-house or in transit, data centres and metal it assets – both in terms of tracking and temperature monitoring, embedding the tag into metal components, and monitoring mechanical plants. Click here to read details about the DS004342-01.
M6E-NANO: Embedded RAIN RFID Reader Module for Battery Operated, Portable Devices
The ThingMagic Nano from Jadak is an RAIN RFID Reader Module that operates in the UHF band and can be used for read and write applications. This module provides an output power of +27 dBm, adjustable in 0.01 dB steps. It has a read speed of 200 tags/sec and a read range of up to 4.5 m with a 6 dBi antenna.The ThingMagic Nano is available in a single unit for global use and can also be customized for frequencies in many global regions including the Americas, European Union (EU), India, Korea, Australia, China, and Japan. Click here to read details about the M6E-NANO.
NOTE: This list has been compiled based on actual analytics data from everything RF. It consists of the products that were most viewed by users on everything RF in a specific category in 2020 (not in any specific order). We have limited the number of products shown for each company to 1, even if there were multiple products from a single company.
Click here to view the latest product releases and news stories on RFID.
