everything RF has compiled a list of trending Aerospace and defense products on the website in 2023. Aerospace and defense products play a crucial role in radar systems, electronic warfare, navigation, and various other applications within the aerospace and defense sector. Some common aerospace and defense products in the RF & Microwave Industry include Software Defined Radios, Multiport Contacts, Tx/Rx Front-End Modules, Power amplifiers, GPS Anti-Jam Systems, Filter banks, Spectrum analyzers, Electromechanical Switches, Diplexers, etc.
Note: These products have not been added in any specific order and are only a sample of what users were looking at on the website.
Microwave Down-converters from 0.5 to 18 GHz
The RFX-3100 Series from Mercury Systems are Microwave Down-converters that convert an input frequency from 0.5 – 18 GHz to an output frequency from 1 – 1.5 GHz. These converters have a tuning resolution of 10 kHz and provide a gain of up to 30 dB in 1 dB steps. They provide an image rejection of more than 60 dB and have spurious levels better than -70 dBm. These down-converters integrate fully modernized microwave components and microprocessors for up-to-date performance capabilities and contain a ruggedized full-featured microwave tuner designed for both set-on and search applications. Read more
Miniature Programmable Transceiver from 400 MHz to 16 GHz
The Multiband Miniature Transceiver (MMT) from Cubic operates in the UHF, L, S, C, and Ku bands from 400 MHz to 16 GHz. It provides the basis for the two-way transport of video and IP data between airborne platforms and land or maritime users. This radio supports programmable waveforms and has been tested for interoperability with U.S. standard CDL and bandwidth-efficient CDL waveforms. It can also be programmed with legacy and custom waveforms and can store more than a dozen, different, field-selectable waveform modes for even wider interoperability. This radio requires a DC supply from 10 to 33 V and consumes less than 32 W of power. Read more
L, S, C-Band Lightweight Software Defined Radio for Airborne Applications
The E-LynX™ LX from Elbit Systems is a Software Defined Radio for L-Band, S-Band, and C-Band applications. This lightweight SDR weighs 130 g and is designed for small platforms such as drones, small UGVs, and mini-UAVs. It supports multi-band, frequency hopping, MRC antenna diversity, and MIMO for ensuring robust smooth video, audio, and data between network members, under harsh channel and terrain conditions. The radio provides seamless integration with transparent IP connectivity and Quality of Service (QoS) of the network for various applications. Read more
Software Defined Radio from 30 to 941 MHz for Military/Civil Applications
The AN/ARC-210 from Collins Aerospace is a Generation-5 Software Defined Receiver-Transmitter that operates from 30 to 941 MHz and complies as per U.S. National Security Agency requirements. It is software reprogrammable in the field via Memory Loader/Verifier Software (MLVS) and is one of the first military airborne transceivers to provide an embedded, fully programmable INFOSEC capability. The radio provides superior performance in the transfer of networked or point-to-point data, voice and imagery. Read more
40 GHz Multiport Contact for Military Avionics and EW Applications
The M8M™ Multiport Contact from Times Microwaves System that operates up to 40 GHz. It is designed for advanced military avionics and electronic warfare (EW) applications that require extremely restricted space constraints and rising operating frequencies. This contact has a unique construction and is ideal for high-vibration and harsh environments. Read more
Dual-Channel Direction Finding and Spectrum Monitoring System from 9 kHz to 18 GHz
The RFeye Array 300 Series from CRFS is an intermediate-sized spectrum monitoring and direction-finding system for vehicle-mounted deployment or fixed installations. The Array 300 uses a unique multi-layer approach that is more sophisticated and versatile than traditional direction finding. High-performance spiral directional antenna modules are optimized for different frequency bands and arranged in multiple orientations. The Array is sensitive to the majority of incoming signal polarizations including all linear polarizations, allowing reliable detection of signals including those invisible to most DF systems. Read more
GaN + GaAs Front-End Module from 2 to 18 GHz for Aerospace & Defense Applications
The QPF0219 from Qorvo is a Tx/Rx Front-End Module that operates from 2 to 18 GHz. It consists of a T/R switch, a limiter, a low-noise amplifier, and a power amplifier. In Tx mode, it delivers saturated power of 10 W with a gain of 14 dB and a PAE of 20% while in Rx mode, it provides a gain of 14 dB with a noise figure of 4 dB. The power amplifier and Tx/Rx switch in the FEM are based on GaN-on-SiC technology while the limiter and LNA are based on GaAs technology. Read more
20 W GaN Power Amplifier from 8.2 to 11.8 GHz
The ADPA1122 from Analog Devices is a Power Amplifier that operates from 8.2 to 11.8 GHz. It delivers an output power of 20 W with a small signal gain of 31 dB and a power-added efficiency (PAE) of 46%. This GaN amplifier has an integrated temperature-compensated RF power detector and is optimized for pulsed applications such as military, marine, and weather radar. It requires a DC supply of 28 V and consumes 200 mA of current. The amplifier is available in an 18-terminal surface-mount package that measures 7 x 7 mm. Read more
Low Noise Monolithic Amplifier from 50 MHz to 10 GHz
The PMA3-14LN+ from Mini Circuits is a Low Noise Monolithic Amplifier that operates from 50 MHz to 10 GHz. It provides more than 20 dB of gain with a low noise figure of 2.1 dB and an input and output return loss of 20 dB. The amplifier requires a single DC supply voltage of 6 V and is matched to 50 ohms. It is based on a pHEMT design that provides enhanced linearity over a board frequency range making it particularly useful in driver amplifiers for complex waveform up-converter paths, drivers in linearized transmit systems, and secondary amplifiers in ultra-high dynamic range receivers. Read more
4-Port Full-Duplex Bi-Directional GaN Amplifier from 0.5 to 6 GHz
The Xtender™ ULSC-20-C01-S01 from NuWaves is a 4-Port Full-Duplex Bi-Directional Amplifier that operates from 0.5 to 6 GHz. In Tx mode, this amplifier delivers a saturated output power of 20 W with a gain of 38 dB while in Rx mode, it provides a gain of 20 dB and has a noise of 5 dB. It is based on gallium nitride (GaN) technology and includes over-voltage and reverse voltage protection features. This full-duplex amplifier has an overall efficiency of 27% and is ideal for extending the communication range of full-duplex wideband transceivers and Software Defined Radios (SDRs). Read more
5-Channel GPS Anti-Jam System for Ground and Marine Applications
The NavGuard 501® SAGE from Mayflower Communications is a GPS Anti-Jam System. It has a 5-channel design and provides simultaneous dual frequency (L1 and L2) GPS protection. This system utilizes a 3.5-inch diameter FRPA footprint and offers an affordable SWaP-C alternative over larger and more expensive existing anti-jam systems. It is a cost-effective alternative for use in GPS contested or denied (NAVWAR) environments and can drive multiple GPS devices from a single antenna and provide full functionality to all connected devices. Read more
1 W GaN Amplifier MMIC from 12.7 to 18 GHz
The CMPA1D1J001S from Wolfspeed is a High-Power Amplifier MMIC that operates from 12.7 to 18 GHz. It delivers a saturated output power of 1 W (up to 31.5 dBm) with a large signal gain of 23 dB and a power-added efficiency of up to 35%. This amplifier utilizes Wolfspeed’s high performance, 0.15µm GaN on the SiC production process, and supports both radar and communication applications within both military and commercial markets. It requires a DC supply of 22 V and consumes 30 mA of current. The amplifier is available in a plastic overmold QFN package that measures 4 x 3 mm and is ideal for military, commercial radar & communications, and general-purpose broadband amplifier applications. Read more
100 W GaN Power Amplifier from 2 to 6 GHz
The RWP2060080-50 from RFHIC is a GaN Power Amplifier that operates from 2 to 6 GHz. It provides an output power of 100 W with up to 50 dB of gain and has an average efficiency of 22%. This Class AB amplifier requires a 40 V supply voltage. It is available in a rugged module with SMA/N-Type connectors. This amplifier has excellent thermal properties. It is ideal for radar applications (navigation, air traffic control, weather etc.). Read more
10 W GaN Bi-Directional Amplifier from 5 to 6 GHz for Military/Commercial Applications
The TTRM4302 from Triad RF Systems is a Bi-Directional Amplifier that operates from 5000 to 6000 MHz. In Tx mode, it delivers a saturated output power of 10 W (40 dBm) with a gain of 25 dB while in Rx mode, it provides a gain of 15 dB and has a noise figure of 2.5 dB. This class AB amplifier supports manual or automatic Tx/Rx switching and has a switching time of less than 2 µs. It uses GaN transistor technology to achieve high linearity with low distortion, or peak power at high efficiencies. The amplifier is designed to support signal types from simple CW/FM signals to complex, highly modulated carriers such as 64 and 256 QAM for 3G/4G telecom and WLAN applications. Read more
Sub-Octave Switch Filter Bank from 2 MHz to 8 GHz
The ATEK950P6 from ATEK MIDAS is a Sub-Octave Switch Filter Bank that operates from 2 to 8000 MHz. It consists of an SP8T switch followed by 7 fixed frequency bandpass filters which are followed by another SP8T switch. Each SP8T switch is used to send the input/output signals to 2 pins. This allows users to bypass the filter bank off-chip. Alternatively, additional off-chip filters or filter banks can be implemented by using the bypass feature. The bandpass filters have a cumulative passband from 485 to 8500 MHz. It has a switching speed of 150 ns and an insertion loss of less than 6 dB. Read more
Versatile, Multi-Channel Software-Defined Radio from 30 MHz to 6 GHz
The Sidekiq™ NV800 from Epiq Solutions is a Software-Defined Radio (SDR) that operates from 30 MHz to 6 GHz (can be extended to 18 GHz). It consists of a dedicated RF transmitter with 8 RF receivers, each with a bandwidth of 50 MHz, for a total bandwidth of 400 MHz. This SDR incorporates four ADRV9004 RF transceivers (from Analog Devices), all streaming data and command & control to an AMD® ZU7 Ultrascale+™ FPGA. It is capable of operating in either phase coherent or independent modes and supports fixed frequency and fast frequency hopping modes of operation, both of which can support direction-finding use cases. Read more
Surface-Mount Switched Filter Bank MMICs from 6 to 18 GHz
The LW48-797 Series from Linwave Technology are Hybrid Switched Filter Bank MMICs that operate from 6 to 18 GHz. They have integrated LNA, limiter, and GaAs switches with ports fully matched to 50 ohms. These MMICs have a switching speed of less than 100 ns and provide 14 dB of gain (in switched paths) and 50 dB of rejection. They offer a broadband solution and allow users to shrink high Q filter space and take advantage of matched supporting components to ensure optimum performance. These filter banks require a DC supply from 4.75 to 5.25 V and consume less than 150 mA of current. They are available in surface-mount QFN packages that measure 10 x 10 mm and are ideal for radar, EW, military communications/datalinks, and test and measurement applications. Read more
UHF/VHF Versatile Software-Defined Transceiver for Military Applications
The URC-300® from General Dynamics is a Software-Defined Transceiver that operates in the UHF/VHF bands (with optional 30-90 MHz frequency band extension). It operates from 115 – 150 MHz (AM), 115 – 173.995 MHz (FM) and 225 – 399.9995 MHz (AM and FM). This transceiver offers versatile VHF/UHF AM and FM capability to provide interoperability with a variety of RF systems. It improves ground-to-air communications with an architecture that enables users to easily upgrade fielded radios. It can operate on both AC and DC (10.7 – 34 V) supplies and can also be battery operated (rechargeable). On a DC supply (28 V), this transceiver consumes less than 2.5 A of current in Tx mode and 360 mA of current in Rx mode. Read more
100 kHz to 20 GHz Spectrum Analyzer with 10GbE Ethernet Interface
The SM200C from Signal Hound is a Spectrum Analyzer and Monitoring Receiver that operates from 100 KHz to 20 GHz with a 10 Gigabit Ethernet SFP+ port to enable communication with a PC over long distances using a fiber optic cable. This high-performance device provides 160 MHz of instantaneous bandwidth I/Q streaming over 10GbE. It has a sweep rate of 1 THz/sec at a resolution bandwidth (RBW) of 30 kHz. The test analyzer has a dynamic range of 110 dB and an SSB phase noise of -132 dBc/ Hz at 10 kHz offset and 1 Hz center frequency. Read more
Tactical Data Link Radio for Link 16 Military Applications
The TacNet™ from BAE Systems is a Tactical Data Link Radio for Link 16 networks. It supports single or dual antenna Tx and Rx and can deliver a selectable transmit power of 90 W, 50 W, and 1 W. This radio is built on a combat-proven tactical data link technology and features built-in growth capabilities, including Link 16 crypto modernization, enhanced throughput (ET), concurrent multi-netting, multi-channel capability, and high power capability. It is qualified to MIL-STD-6016D, STANAG 5516, and DOD 4650.1-R1 requirements. Read more
Multi-Throw Electromechanical Switches from DC to 40 GHz
The CCT-49K Series from Teledyne Defense Electronics are Multi-Throw Electromechanical Switches that operate from DC to 40 GHz. These internally terminated switches have a break-before-make design and can switch to a microwave signal from a common input to any of the 3, 4, 6, and 8 output ports. They provide an isolation of up to 80 dB, have an insertion loss of less than 1.5 dB, and a VSWR of less than 2.2:1. These switches have a latching actuator that remains in the last position selected when the switch is de-energized and each position has an individual actuator to each position, which allows random position selection to minimize switching time. Read more
Diplexer with Passbands from 14.4-14.93 GHz / 15.15-15.35 GHz for Military Applications
The UFDX9999-010 from MtronPTI is a Ku-Band Diplexer with a lower passband from 14.400-14.930 GHz and an upper passband from 15.150-15.350 GHz. It can handle a CW input power of 30 W and provides a channel-to-channel isolation of more than 70 dBc. This diplexer has a phase linearity of ±2° which enables it to support higher data transfer rates with low latency. It is available in a connectorized module that measures 2.91 x 2.40 x 0.60 inches and is suitable for common data link (CDL) applications in UAS, SATCOM, and electronic warfare. Read more
10 W High Power Amplifier from 2 to 18 GHz
The PA-2G18G-43-5-40-SFF from Quantic PMI is a High-Power Amplifier that operates from 2 to 18 GHz. This amplifier delivers a saturated output power of 10 W with a gain of more than 39 dB. It meets the MIL-STD-202 standard for humidity, shock, vibration, altitude, and temperature cycle and has an operating temperature range from -40°C to +85°C. This power amplifier requires a DC supply of up to 22 V. It is available in a module that measures 1.3 x 1.8 x 0.88 inches and has SMA (female) connectors. Read more
Vehicular Mount Antennas from 941.5 to 2000 MHz for Military Applications
The ARA-1220 Series from ARA are Vehicular Mount Antennas that operate from 941.5 to 2000 MHz. These vertically polarized antennas provide a gain of up to 15 dBi and have a VSWR of less than 1.75:1. They have an omni-directional radiation pattern. The antennas have an option for an integrated bandpass filter and low-noise preamplifier with a noise figure of 1 dB (requires a DC supply from 12 to 15 V). These low-profile antennas combine the standard NATO 4-Bolt mounting pattern allowing easy integration into military vehicles and antenna mast systems. Read more
Click here to visit the Military Hub on everything RF to keep up to date with the Aerospace and Defense Industry.
