| Trending RF and Microwave Products this Week |
|
|
| SMT Glass Package for 100+ GHz Operation | |
RF Package
from ED2 Corp
|
| The UGP100 from ED2 Corp is an SMT Glass Package that is designed for operation beyond 100 GHz. It has a copper-based construction for superior heat dissipation & thermal management and has room for 8 Single Layer Caps (SLCs). This package uses hermetic sealing technology to protect sensitive components and is ideal for packaging high-frequency amplifiers, attenuators, limiters, or other multifunction RF devices operating up to 100+ GHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface Mount GaAs Gain Block from 5 to 2000 MHz | |
RF Amplifier
from Guerrilla RF
|
| The GRF9163 from Guerrilla RF is a Gain Block that operates from 5 to 2000 MHz. It provides a gain of 20 dB with a noise figure of 1.8 dB and an output P1dB of 25 dBm. This linear amplifier is based on a GaAs pHEMT process, and it is designed for use in 75 Ohms CATV and 50 Ohms general-purpose applications. It requires a DC supply of 5 V and consumes 280 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 & 5 GHz Wi-Fi 6 & Bluetooth LE 5.4 Dual-Radio Module | |
RF Module
from Murata
|
| The Type 2FP from Murata is a Wi-Fi 6 & Bluetooth LE 5.4 Dual-Radio Module that operates at 2.4 and 5 GHz. It supports SISO with 20 MHz channels delivering up to MCS9 data rates for Wi-Fi and a data rate of up to 2 Mbps for Bluetooth. This module has a Tx power of up to 18 dBm and an Rx sensitivity of up to -106 dBm. It is based on NXP’s RW610 Wireless MCU with a 260 MHz Arm® Cortex ® -M33 processor, 1.2 MB SRAM and 16 MB Flash memory. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable 1-Port Vector Network Analyzer from 85 MHz to 14 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The R140B from Copper Mountain Technologies is a 1-Port Vector Network Analyzer that operates from 85 MHz to 14 GHz. It supports linear, log and segment sweeps with up to 100,001 measurement points per sweep and a measurement time of 170 µs per point. This VNA has a dynamic range of 112 dB (85 – 4.8 GHz) and a directivity of 42 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W Class A/AB Solid-State Power Amplifier from 2 to 8 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2085E-1LC from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 2 to 8 GHz. It delivers a CW/Pulsed saturated output power of more than 250 W with more than 54 dB of gain and a gain adjustment range of 20 dB. This SSPA is based on a Class A/AB linear design delivering high power over an instantaneous S/C-band bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12.5 W Power Amplifier from 6 to 18 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-HPA-0600-1800-40-E from Erzia is a Power Amplifier that operates from 6 to 18 GHz. It delivers a saturated output power of 41 dBm (~12.5 W) with a small signal gain of 46 dB and a flatness of ±1.5 dB. This amplifier has harmonic levels of -20 dBc with a VSWR of less than 2.0:1 (Input) and 3.50:1 (Output). It requires a DC supply of 28 V and consumes less than 82 W of power. |
| |
Download Datasheet
Product Details | |
|
|
| Latest Interview | | Interview with Alejandro Rodriguez from Erzia | | everything RF recently interviewed Alejandro Rodriguez, the R&D Director at ERZIA. He has led ERZIA's R&D efforts and Microwave Integrated Assemblies Department for over a decade. Rodriguez has witnessed firsthand how the Spanish-based RF and microwave manufacturer has expanded its product portfolio and production capabilities, particularly in the New Space market. Click here to read more. | | | |
|
|
| Low PIM 3 Way Power Divider from 698 MHz to 2.7 GHz | |
Power Divider
from MECA
|
| The LPR3N-1.900-M01WWP is a 3 way low PIM power divider from MECA. It operates at a frequency from 0.698 to 2.7 GHz and can handle up to 700 W of average power with an insertion loss of under 0.4 dB. The power divider has a PIM of less than -153 dBc and a VSWR of under 1.45:1. It has N Type female brass albaloy plated connectors and can operate from -55 to +85 Degrees C. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact RF Front-End System-in-Package from 2 to 20 GHz | |
Front End Module
from Spectrum Control
|
| The SCRS-00-1000 from Spectrum Control is a RF Front-End (RFFE) System-in-Package that operates from 6 to 18 GHz (filtered) and 2 to 20 GHz (unfiltered). It delivers the capabilities of an Integrated Microwave Assembly (IMA) in a compact, high-volume package. This RFFE’s surface-mount design along with built-in digital control offers up to 86% reduction in lifecycle costs and 3x improvement in the design velocity. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 dB Directional Coupler from 0.5 to 26.5 GHz | |
Directional Coupler
from KRYTAR
|
| The 152630 from KRYTAR is a Directional Coupler that operates from 0.5 to 26.5 GHz. It has a coupling of 30 dB and a directivity of more than 10 dB. This coupler can handle an input power of 20 W and a peak input power of 3 kW with a VSWR of less than 1.45:1. It has an insertion loss of less than 1.35 dB and a frequency selectivity of ± 1.8 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Reflective Silicon SPDT Switch from 8 to 11 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5142 from Analog Devices is a Silicon SPDT Switch that operates from 8 to 11 GHz. It has a switching speed of 60 ns and provides an isolation of 40 dB. This reflective switch can handle an input power of 10 W (~41 dBm) and has an insertion loss of 1.2 dB. It has a rise/fall time of 40 ns and a settling time of 65 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Front-End SP4T Switch from 600 to 6000 MHz | |
RF Switch
from Qorvo
|
| The QPC8020Q from Qorvo is an SP4T Switch that operates from 600 to 6000 MHz. It has a switching speed of less than 4 us and provides more than 16.5 dB of isolation. This SP4T switch can handle an input power of up to 39 dBm (~8 W) with a VSWR of less than 2.8:1. It requires a supply voltage of 1.8 V and consumes 55 uA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| SPDT Switch from 1.0 to 1.7 GHz for Wi-Fi 7 Applications | |
RF Switch
from Nisshinbo Micro Devices Inc.
|
| The NT1821GVAE1S from Nisshinbo Micro Devices is an SPDT Switch that operates from 1.0 to 1.7 GHz. It has an isolation of up to 43 dB and an insertion loss of less than 0.82 dB. This switch has a switching speed of 200 ns and a P1 dB of +31 dBm. It requires a DC supply of 1.6 to 5 V and integrates DC-blocking capacitors at all RF ports. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Multimode Transmitters from 1435 to 1535 MHz for Airborne Applications | |
RF Transmitter
from Curtiss-Wright Defense Solutions
|
| The TTS-9610 Series from Curtiss Wright are Multimode RF Transmitters that operate from 1435 to 1535 MHz. They combine programmable power features with a highly reliable design to provide a flexible and dependable solution, which ensures that critical data is transmitted efficiently from air to ground on every test flight. These transmitters provide modulation compatibility to IRIG-106-23, and allow users to customize center frequency (in 0.5 MHz steps) and modulation options. |
| |
Download Datasheet
Product Details | |
|
|
|
| E-Field Probe from 20 MHz to 60 GHz | |
Near Field Probe
from Raditeq B.V.
|
| The RSS2060S from Raditeq is an E-Field Probe that operates from 20 MHz to 60 GHz. It can measure electric field strengths of 2 to 1000 V/m at a speed of up to 100 measurements per second. This probe can simultaneously measure X-Y-Z axis field strengths & the isotropic value and has an anisotropy of less than ± 4 dB with a linearity of ± 0.5 dB ± 0.5 V/m. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3-Stage GaAs Power Amplifier MMIC from 17 to 22 GHz | |
RF Amplifier
from United Monolithic Semiconductors
|
| The CHA4262-QDG from United Monolithic Semiconductors is a 3-Stage GaAs Power Amplifier MMIC that operates from 17 to 22 GHz. It delivers an output power of up to 23 dBm with a small signal gain of 26 dB and a power-added efficiency (PAE) of 37%. This RoHS-compliant power amplifier is available in a QFN package that measures 4 x 4 mm and is internally matched to 50 Ohms. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radar MMIC for Automated and Autonomous Driving | |
Radar Sensor
from Infineon Technologies
|
| The RASIC CTRX8191F from Infineon Technologies is a Radar MMIC. It is specifically designed to meet the requirements of automated and autonomous driving, thereby enabling the development of next-generation radar imaging modules. This radar offers a relatively higher signal-to-noise (SNR) ratio compared to previous generations, allowing the radar to detect vulnerable road users and vehicles at a distance of up to 380 m. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cospas-Sarsat Emergency Beacon TCXO | |
TCXO
from Raltron
|
| The RSTX Series from Raltron are TCXOs that operate at SARSAT frequencies and are compliant with Cospas-Sarsat emergency beacon requirements. They produce an LVCMOS or Clipped Sine output and have a frequency stability of ±0.2 ppm with a phase noise of less than -152 dBc/Hz. These TCXOs have an aging of ±3 ppm (over 10 years) and can operate over a temperature range of -40 to +55 °C. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Ultra-Miniature AT-Cut Quartz Crystals from 40 to 80 MHz | |
RF Quartz Crystal
from Abracon LLC
|
| The ABM14N Series from Abracon are Quartz Crystals that operate from 40 to 80 MHz. They are available in standard frequencies of 40 MHz, 48 MHz, 52 MHz, 59.97 MHz, 60 MHz, 76.8 MHz, and 80 MHz. These crystals have a frequency stability of ±10 ppm (vs. temperature). They are optimized to provide low plating load, low equivalent series resistance (ESR), and tight frequency accuracy in a package that is 33% smaller. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Ka-Band GaN SSPA/BUC from 29 to 31 GHz | |
Block Up Converter
from TTI
|
| The Dual GaN Ka SSPA/BUC from Celestia TTI is a Ka-Band GaN SSPA/BUC that upconverts input frequencies of 1 to 2 GHz to output frequencies of 29 to 31 GHz. It delivers an output power of 46 dBm (saturated) & 43 dBm (linear) with a gain of more than 70 dB. This SSPA/BUS has an attenuation range of 20 dB in 0.1 dB steps and a VSWR of less than 1.50:1 (input) & 1.30:1 (output). |
| |
Download Datasheet
Product Details | |
|
|
|
| Wideband IF Vector Signal Generator from 11 to 21 GHz | |
Signal Generator
from Rohde & Schwarz
|
| The R&S SFI100A from Rohde & Schwarz is an IF Vector Signal Generator (VSG) that operates from 11 to 21 GHz. It can deliver an output power from -90 dBm to +10 dBm with a power resolution of 0.01 dB and a frequency step size of 0.001 Hz. This signal generator satisfies the bandwidth requirements of demanding applications such as early 6G research, mmWave WLAN, and automotive radar. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Band Embedded GNSS Quadrifilar Helix Antenna | |
GPS/GNSS Antenna
from Taoglas
|
| The EAHP.125.01.0100D from Taoglas is an Embedded GNSS Quadrifilar Helix Antenna that operates in the GPS (L1/L2/L5), Galileo (L1/E5/E5a/E5b), GLONASS (G1/G2/G3), BeiDou (B1/B2a/B2b), and 1540-1555 MHz (upper L-band). This GNSS antenna is very compact and lightweight, which makes it suitable for use in UAVs and robotic applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G Terminal Mount External Antenna from 600 to 5000 MHz | |
Antenna
from Quectel
|
| The YECT002W1A from Quectel is a 5G External Antenna that operates from 600 to 5000 MHz. This dipole-type antenna is designed to work with various GND plane sizes or in free space for ease of integration with a hinged N-type Male connector to achieve the optimum position. It has an efficiency of up to 81.2% and is backward compatible to support 4G/3G & 2G networks as well as LTE Cat-M & narrowband IoT (NB-IoT). |
| |
Download Datasheet
Product Details | |
|
