Latest IoT Products

Global Multi-Band LPWA, LTE-M, and NB-IoT Cellular Chipset

The UBX-R5 Series from u-blox is a Global Multi-Band Cellular Chipset that supports LPWA, LTE-M, and NB-IoT technologies. It is optimized for IoT applications such as smart metering, telematics, tracking, security systems, building automation, as well as smart lighting solutions, and connected health. It implements key features of 3GPP Release 14, answering the need for longevity in IoT solutions. This chipset has a downlink data rate of 375 kbit/s and an uplink data rate of up to 1200 kbit/s. Click here to view specs.

LTE Cat NB1/NB2 Module for 5G Massive IoT Applications

The Monarch NB02S is an LTE Cat NB1/NB2 module that supports 3GPP LTE Release 14/15 Cat NB1 and NB2 with up to 120.7 kbps DL and 21 kbps UL. It is based on Sequans’ second-generation Monarch N NB-IoT chip that integrates baseband, RF transceiver, and front-end, SE, application MCU, RAM, and power management in a single chip. This module has an EAL5+ Secure Element that enables the integration of the SIM inside the module, thereby introducing Module-as-a-SIM™ capability. Click here to view specs.

Low Power Module with Integrated LTE-M/NB-IoT Modem and GPS

The nRF9160 is a low power System-in-Package with integrated LTE-M/NB-IoT modem and GPS. The module has 1 MB of Flash plus 256 kB of RAM onboard memory with a broad range peripheral set, analog, and digital interfaces, 32 GPIOs, a stand-alone modem with full LTE capability, plus a multiband RF front-end. It incorporates Arm’s latest Arm Cortex M-33 CPU core, Arm TrustZone, and Arm CryptoCell security for Internet-level encryption and application protection. Click here to view specs.

LoRa Radio Module with Active Steering Technology

The ETH-LORA-M-AX-01 from Ethertronics is a LoRa Radio Module that operates in the unlicensed 868/915 MHz bands. It combines the Semtech LoRa transceiver SX1272 with the benefits of Ethertronics Active Steering technology and an impedance matching solution to maximize the power transfer between the radio and the antenna. The low power radio module delivers up to 19 dBm of output power, which results in a link budget of more than 156 dB and has a sensitivity of up to -138 dBm. This SMT mounted module is ideal for Smart Metering, Smart Grids, Smart City, Telemetry, and IoT applications. Click here to view specs.

868 MHz LoRa Module for IoT and Building Automation

The iM880B-L from IMST is a Bi-Directional LoRa Module designed for the unlicensed 868 MHz band. Based on Semtech's ultra-long-range transceiver SX1272, it provides an output power of up to 19 dBm and has a receiver sensitivity of -138 dBm (SF 12; SB 125 kHz, CR 4/6). It offers an RF data rate from 0.24 to 37.5 kbps and has a LOS (Line of Sight) range up to 15 km. This compact module requires a DC supply of 2.4 to 3.6 V and draws 118 mA of Tx current, 11 mA of Rx current and 1.8 μA of current in sleep mode. It supports UART, SPI, and I2C interfaces and is certified with ETSI EN 300 220LoRaWAN standards. Click here to view specs.

LoRa Transceiver Module for M2M and IoT Edge Nodes Applications

The CMWX1ZZABZ-078 from Murata is LoRa Transceiver Module that operates from 860 to 930 MHz. It is based on the Semtech SX1276 ultra-long range spread spectrum wireless transceiver and an STMicro STM32L0 series ARM Cortex-M0+ 32-bit microcontroller (MCU). The transceiver has an integrated TCXO which exhibits robust low drift thermal characteristics and provides an accurate clock source for the RF transceiver. It provides an output power of up to 14 dBm which can be increased to 20 dBm by using a PA boost function. Click here to view specs.

Low Power CAT-M and NB-IoT Module for M2M Applications

The SIM7080G from SIMCom is an LPWA module for Multi-Band CAT-M and NB-IoT. It is designed for applications that need low latency and low throughput data communication in a variety of radio propagation conditions. The module provides an uplink data rate of up to 1119 Kbps (Cat-M), 150 Kbps (NB-IoT), and a downlink data rate of up to 589 Kbps (Cat-M) and 136 Kbps (NB-IoT). It requires a supply voltage from 2.7 to 4.8 V and with Power Saving Mode (PSM) and Extended Discontinuous Reception(eDRX), SIM7080G can extend battery life to 10 years. Click here to view specs.

Multi-Band NB-IoT Module with Ultra-Low Power Consumption

The BC65 from Quectel is a multi-band LTE NB-IoT Module with extremely low power consumption. It provides a complete range of SMS and data transmission services to meet client-side demands through its in-built eSIM feature. Designed to be compatible with Quectel GSM/GPRS M66, NB-IoT BC66, and BC68 modules in the compact and unified form factor, the BC65 provides a flexible and scalable platform for migrating from a GSM/GPRS to an NB-IoT network. It has a specialized PSM_EINT feature which can be easily woken up via external interrupts. Click here to view specs.

Quad-Band GSM Module with Integrated GNSS Receiver for IoT

The GE310 from Telit is a Quad-Band GSM/GPRS Module which is integrated with a Multi-constellation GNSS receiver and a Bluetooth transceiver. This module is recommended for new designs requiring quad-band GSM/GPRS coverage in a compact and robust package delivering easy integration thus reducing the impact on final application costs. It is available in an LGA package that measures 15 x 18 mm and is an ideal solution for applications such as asset management, utilities, and telematics. Click here to view specs.

Multi-Mode LPWA Module for LTE-M, NB-IoT, 2G and GNSS Applications

The AirPrime® HL7802 from Sierra Wireless is a Multi-Mode LPWA Module that supports global LTE-M, NB-IoT, 2G, and GNSS networks. The HL7802 module for Cat-M1/NB1 worldwide networks is fully compliant with the 3GPP Release 13 standard and is Release 14 ready to support NB2 features in the future, providing a new low-cost, best-in-class power technology for low-bandwidth IoT applications with an extended reach beyond traditional cellular. It delivers up to 300 Kbps of download speeds and 375 Kbps of upload speeds. Click here to view specs.

LTE Multi-Band Front-End Module for IoT Applications

The SKY68001-41 from Skyworks is a Multi-Band Front-End Module that supports cellular LTE M/NB-IoT (half-duplex) transceiver platforms. The module integrates the entire RF front end necessary for an LTE multi-band radio operating at low-band and mid-band frequencies, including Rx low-pass filters, a broadband PA with a bias controller, a Tx low-pass harmonic filter, an antenna switch, and MIPI RFFE controller. In the Tx section, the PA load-line is optimized for high efficiency while simultaneously meeting 3GPP ACLR and emissions mask specifications with LTE up to 6 RB. Click here to view specs.

RF Front-End Module for NB-IoT and Cat-M1 Applications

The QM55003 from Qorvo is an RF Front-End (RFFE) Module for NB-IoT and Cat-M1 applications. This multi-band, multi-chip module supports low-band (663 to 915 MHz) and mid-band (1695 to 1980 MHz) operations. It has an integrated harmonic rejection LPF, antenna switch, and auxillary TX/RX paths. The band select and bias are programmed through a Mobile Industry Processor Interface (MIPI). This FEM is available in a 20-pin laminate MCM package that measures 4 x 4 x 0.64 mm. Click here to view specs.

868 / 915 MHz LPWAN Module Based on MIOTY Technology

The RC1882CEF-MIOTY1 from Radiocrafts is an RF Module based on MIOTY Technology that operates at 868 MHz. MIOTY is a low-power, wide-area network (LPWAN) protocol that was designed to have the best-in-class reliability and scalability of all available LPWAN technologies today to support massive industrial and commercial IoT deployments. The module has an output power of 14 dBm and a sensitivity (PER 10 %) @ 400b/s of -129 dBm. It requires a supply voltage of 1.8-3.8 V and has a current consumption of 6 mA (Rx) and 25 mA (Tx). Click here to view specs.

Transceiver Module for Thread Applications

The Raven Transceiver module consists of an 802.15.4 RF transceiver paired with a microcontroller specifically designed for the Thread protocol. The Raven module is an IEEE 802.15.4 standard radio paired with an ARM Cortex-M4 microcontroller. The IEEE 802.15.4 standard specifies the radio PHY and MAC layers, the low-level physical control and operation of the radio. This standard has become popular due to its support for low-power and high-reliability systems. Click here to view specs.

LTE CAT-M Module for Wearable Devices and Asset Tracking

The MA510-GL from Fibocom is an LTE CAT-M Module that supports LTE Cat-M1, Cat-NB2, and EGPRS communication protocols. It is based on the Qualcomm IoT platform and has an in-built GNSS module. This IoT module requires a DC supply from 3.3-4.5 V and supports eDRX / PSM low power modes with a current consumption of up to 3.2 uA (PSM mode). It supports MQTT, CoAP, LWM2M network protocols, and industrial interfaces such as UART, USB, I2C, SPI, GPIO, and I2S. Click here to view specs.

Multi-Protocol Bluetooth Low Energy / NFC Combo Module

The BL654PA from Laird Connectivity is a wireless module that supports Bluetooth Low Energy (BLE 5.1) and NFC. This module is powered by the Nordic nRF52840 Silicon SoC that provides a secure and robust BLE connection and Cortex-M4F CPU for any OEM product design. It has an integrated Power Amplifier from Skyworks that provides an output power of up to 18 dBm. The module provides a data rate up to 2 Mbps and has 46 GPIOs to support 2x UART, 8x ADC, 2x I2C, 4x SPI, 1x QPSI, 2x PDM, 2x I2S and NFC. Click here to view specs.

Low-Power LTE-M / NB-IoT Modules

The Digi XBee 3 from Digi are Cellular LTE-M/NB-IoT modules that offer the flexibility to switch between multiple frequencies and wireless protocols as needed. These modules provide MicroPython programmability with 32 KB Flash / 32 KB RAM for edge computing and dual-mode radio for local configuration over Bluetooth LE using the Digi XBee Mobile app. The modules feature a power-saving mode that extends sleep time & battery life and can be easily configured and controlled from a simple, central platform with the help of Digi Remote Manager. Click here to view specs.

Nano Sim-Size Bluetooth 5.1 Module

The 2611011024000 (Proteus-III) from Wurth Elektronik is a BLE V5.1 RF Module with a data rate of 2 Mbits. It is based on the Nordic nRF52840 chipset and has a payload size of 964 bytes. The module has a Tx output power of 6 dBm and has a receiver sensitivity of -92 dBm. It requires a 3.6V DC supply and has a current consumption of 18.9 mA when transmitting and 7.7 mA when receiving. The module has a line of sight range of up to 400 meters. The module has 6 configurable digital I/O pins that support serial data transmission. Click here to view specs.

Bluetooth 5.2 Low Energy Module from 2402 to 2480 MHz

The EYSNSNZWW from Taiyo Yuden is a Bluetooth 5.2 Low Energy Module. It has an ARM® Cortex M4 32-bit processor and features 24 KB of RAM and 192 KB of flash memory. The module provides a typical output power of +4 dBm and requires a supply voltage from 1.7 to 3.6 V. The module is available in an SMD package that measures 3.25 x 8.55 x 1.00 mm and has an integrated high-performance pattern antenna. It is ideal for a wide range of Bluetooth low power applications. Click here to view specs.

Surface Mount Monopole Antenna for LTE-M and NB-IoT Applications

The Splatch SP610 is a surface-mount monopole antenna for embedded LTE (700 MHz bands) and cellular IoT (LTE-M and NB-IoT) applications. This omnidirectional antenna provides a peak gain of 5.1 dBi with an efficiency of more than 60% and can handle an input power of up to 10 watts. The SP610 is available in tape and reel packaging that measures 40 x 10 x 2.8 mm and is designed for reflow-solder mounting directly to a printed circuit board for high-volume applications. Click here to view specs.

Flexible Peal-and-Stick Antennas for IoT Applications

The Revie Flex Series from Laird Connectivity are flexible, embedded peel-and-stick antennas from 600 MHz to 6 GHz. These antennas are ground plate independent for design simplicity and have U.FL, MHF1, or customizable (MHF4L/W.FL, SMA, MMCX, Others) connector options. These flexible, peel-and-stick antennas are designed to support LTE-M, Cat M1, NB-IoT, and sub-6 GHz 5G applications. The Revie Flex Series is available in three options - Base Revie Flex that operates from 698-875 MHz and 1710-2500 MHz, the Revie Flex 600 that operates from 600-6000 MHz, and the Revie Flex 700 that operates from 698-6000 MHz. Click here to view specs.

3-Port Adhesive Mount Antenna for Cellular/LTE, ISM, and GNSS Applications

The 2J4250PGF-2.4 from 2J Antennas is an Adhesive Mount 3-Port Antenna that operates from 698-960 MHz, 1575-1606 MHz, 1710-2170 MHz, 2410-2490 MHz, and 2500-2700 MHz. It supports 2G, 3G, 4G, Wi-Fi, BT, ZigBee, ISM, GPS/QZSS/Galileo, and GLONASS standards (Port 1: Cellular/4G LTE; Port 2: 2.4 GHz ISM; Port 3: GPS/GLONASS). This antenna delivers a peak gain of 2.8 dBi with an efficiency of up to 29.6% and can handle up to 25 W of peak input power. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest IoT Products