Latest RF & Microwave Products of the Week (03

3.3 to 5 GHz MHz Rx Front-End Module for TD-LTE and 5G Massive MIMO

The AFRX5G372 from NXP Semiconductors is an integrated multi-chip Rx front end module (FEM) designed for TD-LTE and 5G Massive MIMO applications. This module operates from 3300 to 5000 MHz and provides a gain of 34 dB and a noise figure of 1.6 dB at 5000 MHz in the receive mode. It consists of a T/R switch, a two-stage low noise amplifier and support circuitry to work from a 5 V supply and a 1.8 V logic-level T/R control interface. The device is available in a 6.2 x 6.2 mm LGA package, which is compatible with QFN 6 x 6 footprint. Click here to view specs.

2-Port USB Controlled VNA from 300 kHz to 6.5 GHz

The SC5065 from Copper Mountain Technologies is a modular 2-port compact VNA for 2-path measurements that operates from 300 kHz to 6.5 GHz. It has a dynamic range of 140 dB, an output power of 15 dBm, and a typical measurement speed of 16 µs per point. The VNA has a directivity of 46 dB and can be used to measure all four S parameters (S11, S21, S12, and S22). This USB controlled VNA is suitable for telecommunication, automotive, IoT, aerospace and medical devices applications. The SC5065 VNA can be operated by the S2VNA software application provided by CMT which runs on Windows and Linux operating systems on a PC, laptop, tablet, or x86 board computer connecting to the measurement hardware via USB interface. The VNA can be integrated into production test system via a manufacturing Test plug-in. The VNA is delivered with factory calibration certificates containing no data. The add-on option for ISO17025/Z540-1 Accredited, Traceable Calibration Certificate and Uncertainties i...Click here to view specs.

9 kHz up to 110 GHz Ultra-portable, Millimeter Wave Spectrum Analyzer

The Spectrum Master MS2760A is an ultra-portable, millimeter wave spectrum analyzer that can be used to verify high-frequency designs, including those used in 5G and E-band applications. It is available in multiple frequency options that vary from 9 kHz to 110 GHz (32 GHz, 44 GHz, 50 GHz, 70 GHz, 90 GHz and 110 GHz). In addition to 5G and E-band, this analyzer significantly improves test procedures and lowers the cost-of-test in other fast-growing mmWave applications, such as 802.11ad/WiGig, satellite communications, electronic warfare, and automotive radar. For R&D and test engineers in lab environments, the MS2760A conducts essential spectrum measurements, such as spectrum analysis, channel power, adjacent channel power, spurious emissions, and occupied bandwidth. Users can achieve accuracy never before possible at higher frequencies, as the MS2760A allows measurements to be taken directly at the DUT, unlike benchtop models that require expensive cables that can add loss. Its...Click here to view specs.

2300 to 2400 MHz Cavity Band Pass Filter

The AB2350B490 from Anatech Electronics is a Cavity Band Pass Filter for Wi-Fi applications with a passband from 2300 to 2400 MHz. The filter has an insertion loss of less than 1.7 dB and 80 dB of rejection above and below the passband. It can handle up to 70 watts of power and is available in a module that measures 3.54 x 1.47 x 1.03 inches with SMA female connectors. Click here to view specs.

10 MHz to 1000 MHz Battery Powered RF Power Meter

The PM-1 from BSRF is a Broadband CW Power Meter that operates from 10 MHz to 1000 MHz. The power meter has a dynamic range of 43 dB and can measure signals from -10 dBm to 33 dBm with an accuracy of 0.2 dB. This battery-operated benchtop device can display the power level in W or dBm. It can last up to 8 hours at a time. The PM-1 is available in a robust aluminum case with a BNC connector for the RF Input. The device measures 3.3 x 2.3 x 1.2 inches. Click here to view specs.

USB Programmable Signal Generator from 1.5 to 6 GHz

The LSG-602 from Vaunix is a USB programmable signal generator that operates from 1.5 to 6 GHz (S and C-Band) with a resolution of 100 kHz and switching time of 10 microseconds. The signal generator provides calibrated power control from -40 dBm to 10 dBm in 0.5 dB steps. The generated signal has a phase noise of better than -95 dBc/Hz at 100 kHz offset, spurious lower than -70 dBc and harmonics less than -10 dBc. The LSG-602 is available in a compact module that measures 4.90 x 3.14 x 1.59 inches with SMA female connectors and is ideal for Automated Test Equipment (ATE), Engineering/Production Test Labs and portable LO source applications. The signal generator is powered and controlled by USB connection to a PC or self-powered hub, and is programmable from the included graphical user interface (GUI) software, or by using the sdk provided by Vaunix. Click here to view specs.

8-Channel Programmable Attenuator System from 200 MHz to 6 GHz

The 50PA-506 from JFW Industries is a Solid State Programmable attenuator system that operates from 200 MHz to 6 GHz. It has eight individually controlled attenuation channels that each provide a total attenuation range of 63 dB with 1 dB steps. Each attenuation channel has an insertion loss of less than 6.6 dB and can handle up to 33 dBm of input power. This benchtop attenuator is available in a module with SMA female connectors with a manual control facility having a 20 button keypad & LCD display. It can also be controlled remotely with an Ethernet RS-232 interface. The system requires a 100 to 240 volts AC power supply. Click here to view specs.

6 dB Waveguide Attenuator from 58 to 67 GHz

The ATN-W-62500-5000-6-15 from Exceed Microwave is a V-band waveguide attenuator that operates from 58 to 67 GHz. It has a nominal attenuation of 6 dB and a return loss of less than 12 dB. The attenuator has a WR-15 waveguide size and has a very short length of 0.250 inches. Click here to view specs.

SPDT Non-Reflective Switch from DC to 26.5 GHz

The MASW-011107-DIE from MACOM is a GaAs-based SPDT non-reflective switch that operates from DC to 26.5 GHz. It has an insertion loss of 1.3 dB and high isolation of 46 dB when operating at 20 GHz. This switch is available as a bare die and is ideal for SATCOM, 5G wireless, test and measurement (T&M), EW and microwave radio applications. Click here to view specs.

Continuously Variable Attenuator from 2 to 4 GHz

The 4484-30 from ARRA is a continuously variable attenuator that operates from 2 to 4 GHz. This 1 channel attenuator has an attenuation range of 10 dB with an accuracy of ±0.75 dB and an insertion loss of 0.5 dB. It has a mechanical dial which through which the attenuation level can be regulated. The attenuator can handle up to 50 watts of power and is available in a module with SMA or N-Type connectors. Click here to view specs.

Low Power, High Stability OCXO from 8 to 100 MHz

The OCXO3317AW Series of OCXOs from Dynamic Engineers are very low power, high stability, low phase noise oven-controlled crystal oscillators that operate from 8 MHz to 100 MHz. They consume up to 70 mW of power and have a stability of less than ±10 ppb over the temperature range from -40°C to +85°C. The OCXOs provide an HCMOS and Sinewave output with a warm-up time of less than 30 seconds. They require a 3.3/5 V supply and are available in a package that measures 16 x 15 x 10.5 mm. The OCXO3317AW Series of OCXOs can be used in a wide range of applications including portable wireless communications, mobile test equipment, beacons, rescue systems, battery powered systems etc. Click here to view specs.

Low Phase Noise VCSOs with 800 MHz, 1 GHz, 1.6 GHz and 2 GHz Frequencies

The RSV2522 series are Voltage Controlled SAW Oscillators (VCSO) that generate frequencies of 800 MHz, 1 GHz, 1.6 GHz and 2 GHz. The VCSOs use high performance SAW resonators to generate 800 MHz and 1 GHz frequency outputs, and have a frequency doubler to reach 1.6 GHz and 2 GHz frequencies, respectively. The VCSOs have a noise floor as low as -172 dBc/Hz (for 1GHz output) and have outstanding broadband jitter performance of below 10 fs. They are available in a 25 x 22 x 5 mm SMD package and are ideal for telecommunications, avionics, Instrumentation, high speed converter and test & measurement applications. The VCSOs can be easily locked to a stable reference through a Phase Locked Loop system, or they can be used as a SAW clock without the need for external circuitry. The RSV2522 require a single +5V power supply, and operates over the full industrial temperature range from -40 to +85°C. Click here to view specs.

5 GHz Front End Module for Wi-Fi 802.11ax Systems

The QPF4530 from Qorvo is an integrated front end module (FEM) designed for Wi-Fi 802.11ax systems. It operates from 5150 to 5925 MHz and integrates a 5 GHz power amplifier (PA), regulator, SPDT switch, and a low noise amplifier (LNA) with bypass. The FEM provides a transmit gain of over 30 dB, receive gain of 15 dB and has a noise figure of 2 dB while operating over a 3.3 V supply. It is available in a 3 x 3 mm 16-pin QFN package and is ideally suited for Access Points, Wireless Routers, Client Equipment, Customer Premise Equipment, and Internet of Things (IoT) applications. Click here to view specs.

Ultra-Low Noise Cryogenic Amplifier from 65 to 115 GHz

The LNF-LNC65_115WB from Low Noise Factory is an ultra-low noise cryogenic amplifier that operates from 65 to 115 GHz. The amplifier provides a gain of 23 dB with a noise figure of 0.4 dB and noise temperature of 28 K. It requires a supply voltage of 1 V and is available in a waveguide module that measures 14.92 x 23 x 19.2 mm with a WR10 waveguide, UG387/U flange on one end and a Nano-D connector on the other end. Click here to view specs.

125 W Solid State Amplifier from 1 to 2.5 GHz

The 125S1G2z5 from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled CW Amplifier that operates from 1 to 2.5 GHz. This broadband amplifier is ideal for applications where instantaneous bandwidth, high gain and linearity are required. When used with a sweep generator, the amplifier provides a minimum of 125 watts of RF power. It is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure. The amplifier is available in a benchtop cabinet or rack mount module with front panel control options. It is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touchscreen display to indicate the ...Click here to view specs.

130 W GaN Power Amplifier from 700 MHz to 6 GHz

The AMP2070C from Exodus Advanced Communications is a solid-state power amplifier that operates from 0.7 to 6 GHz. This class A/AB GaN amplifier produces over 100 watts of power (50 W P1dB) with a gain of over 50 dB. The amplifier has excellent gain flatness, optional monitoring parameters for Forward/Reflected power, voltage, current & temperature sensing for superb reliability and ruggedness. It has been designed for EMI/RFI, Lab, Communications and EW applications and is suitable for CW, pulse and all single channel modulation standards. The AMP2070C is available as a rack mount system that measures 430 x 133.3 x 560 mm with N-Type Female connectors and can be remotely controlled via Ethernet RJ-45 TCP/IP, USB RS232/RS422/485 GPIB IEEE interfaces. Click here to view specs.

C-Band Super Low Noise Amplifier with Fault Detection

The APT3-05400590-1010-LS-D4-FAC is a Low Noise amplifier that operates from 5.4 to 5.9 GHz. It provides a P1dB of 12 dBm and a gain of 28 dB with a noise figure of less than 0.9 dB. An internal limiter at the input provides protection of up to 2W CW of RF input power over the full band. There is provision for a Fault Alarm signal via one of the pins on the external MS3112E8-4P connector (used for power) that is triggered by a pre-defined change in current draw. It is available in a module with SMA female connectors and is ideal for receiver front end, radar, Satcom and test equipment applications. Click here to view specs.

30 W Low PIM Terminations from 0.38 to 2.7 GHz

The LPT30-4310M from MECA is a Low PIM Terminationsthat operate from 0.38 to 2.7 GHz. It is matched to 50 ohms and can handle an average power up to 30 watts and peak power up to 5 KW. The termination has PIM values as low as -155 dBc and is thermally compensated to handle full rated power to 85 degrees C. It is available in a compact package that measures 6” (length) x 2.25” (diameter) with 4.3/10 male connectors. Click here to view specs.

6-in-1 Adhesive Mount MIMO GNSS Antenna from 617 to 5925 GHz

The MA931.A.LBICGH.008 from Taoglas is a low profile 6-in-1 wall mount antenna that designed for IoT Gateway and Router devices. This antenna includes two 5G/4G MIMO antennas (617-960MHz/1710-2170MHz/2490-2690MHz/3300-3600MHz/5150-5925MHz), three dual-band 2.4/5.8GHz Wi-Fi antennas and one GNSS antenna supporting GPS-GLONASS-GALILEO-BeiDou for location accuracy. The MA931.A.LBICGH.008 is available in a heavy-duty, fully IP67 waterproof package that measures 146 x 134 x 20 mm with SMA (M) connectors and is ideal for IoT Gateway and Routers, HD Video Streaming, Transportation and Remote Monitoring Applications. It comes with a 3M foam adhesive and can be mounted internally or externally on a vehicle. The antenna is available with 1 meter, low loss KSR-200P coaxial cables for the 5G/4G and Wi-Fi antennas, and RG174 coaxial cable for the GNSS antenna as standard. Customized cables and connector versions are also available. Click here to view specs.

4.3-10 F/F Bulkhead Coaxial RF Surge Protector from 698 MHz to 2.7 GHz

The LCSP1061 from L-Com is a 4.3-10 F/F Bulkhead Coaxial RF Surge Protector that operates from 698 MHz to 2.7 GHz. It has a low PIM of -173 dBc and VSWR as low as 1.12:1. The device can handle an input power of up to 500 W and has multi-strike capability. It can handle surge currents of up to 20 kA for DC and 40kA for RF. This 4.3-10 surge protector is IP67-rated for outdoor use and can be used in Wi-Fi networks, cellular base stations, active antenna systems, DAS networks and public safety systems. Click here to view specs.

High-Performance IRNSS+GPS+GAGAN Module

The Navika-550 is a GNSS module that supports IRNSS and GPS signals with GAGAN Satellite-Based Augmentation System (SBAS). It has acquisition and tracking sensitivity of -145 dBm and -160 dBm respectively. The module operates over a single 3.3V input supply voltage. It is available in a surface-mount package that measures 40 x 40 mm and is ideal for aerospace, automotive and SATCOM applications. The Navika-550 has dedicated antenna ports that can be interfaced to external IRNSS and GPS antennas. The module supports a rich set of interfaces like SPI port, I2C port, and two UART ports. It supports NMEA message protocol for IRNSS to communicate the location and timing information to the outside world. Click here to view specs.

UHF RFID Tag for Metal Surfaces with a 1.6 Meter Range

The ART915X100202TO-IC from Abracon is an ISO 18000-6C/EPC Class1 Gen2 compliant RFID tag that operates from 866 to 868 MHz and 902 to 928 MHz. It utilizes the Alien H3 RFID chipset and has a read range of up to 1.6 m. The tag is available in a package that measures 10 x 2.5 x 2.5 mm and is compatible with any material, including metal. It is ideal for local asset tracking, medical equipment, military devices, and data center applications. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (03 - 09 Oct, 2019)