Latest RF & Microwave Products of the Week (12

BAW Band Pass Filter from 3.78 to 3.88 GHz

The AKF-1938 is a 3.78 to 3.88 GHz BAW RF filter designed for use in radar and RF transceiver applications. It provides a low insertion loss covering 100 MHz of bandwidth with a high rejection of 35 to 55 dB. The filter is available in an ultra-small module that measures 2 x 2.5 x 0.9 mm and operates over a temperature range from -40 C to +105 C. Click here to view specs.

USB Programmable Digital Attenuator from 10 MHz to 13 GHz

The LDA-133 Digital Attenuator from Vaunix is a bidirectional, 50 Ohm step attenuator that operates from 10 MHz to 13 GHz. It has a step size of 0.5 dB and 63 dB of control range with reliable and repeatable solid state digital attenuation. This lab brick can handle up to 2 Watts of input power. The device is compact enough to fit into a single rack unit for ATE applications such as; WiMAX, 3G, 4G, 5G, LTE, Microwave Radio and Satcom Fading Simulators. This attenuator is easily programmable for fixed attenuation, swept attenuation ramps and fading profiles directly from the included Graphical User Interface (GUI). Users can also develop their own interface using Vaunix supplied LabVIEW drivers, Windows API DLL files, Linux drivers, Python examples and much more. The power and control connection is from a standard USB type-B female. This single channel digital attenuator is designed to operate reliably from -30 to +70 C. Click here to view specs.

75 Ohm CATV Push-Pull Amplifier from 45 to 1218 MHz

The QPA8801 from Qorvo is an ultra-linear GaAs amplifier MMIC that provides over 11 dB of gain at 1218 MHz. Operating from 45 to 1218 MHz, this IC provides an output power of 27.5 dBm and is ideal for use in CATV distribution systems requiring high output power capability. This amplifier requires 12 volts of power supply and consumes less than 4.56 W of power. The QPA8801 is available in a 40-pin 5 x 7 mm QFN package and is suitable for DOCSIS 3.1, Broadband CATV hybrid modules, Head End CMTS Equipment, and 75 Ω amplifiers applications. Click here to view specs.

High Gain Broadband Amplifier from 1.7 to 2.2 GHz

The F1421 from IDT is a high gain broadband RF amplifier that operates from 1.7 to 2.2 GHz. This amplifier provides 23 dBm of output power with a gain of 20.3 dB, and a noise figure of 5.5 dB at 1.9 GHz. It requires a 5 V supply and draws 138 mA of current. This device is packaged in a 4 x 4 mm, 24-QFN package and is ideal for Multi-mode, multi-carrier transmitters, PCS1900 base stations, DCS1800 base stations, WiMAX and LTE base stations, UMTS/WCDMA 3G base stations, PHS/PAS base stations, and public safety infrastructure applications. Click here to view specs.

Dual-Band (2.4 GHz and 5 GHz) 802.11ac Front-End Module

The SKY85813-11 from Skyworks is a Dual-Band (2.4 GHz and 5 GHz) 802.11ac Front-End Module. This FEM integrates a 5 GHz SPDTtransmit/receive switch, low-noise amplifier with bypass, and power amplifier. It also contains a 2 GHz coexistence filter, diplexer, and dual-band coupler. The SKY85813-11 provides 17 dBm of output power and a gain of 26 dB on the Tx side. On the receive side, it provides a gain of 10 dB. This FEM requires a 3.7 V supply voltage. It is available in a compact, 24-pin 3 x 3 x 0.8 mm package and is ideal for 802.11ac smartphones, Wi-Fi enabled mobiles and SiP modules for embedded systems applications. Click here to view specs.

High Power SPDT Switch from 20 to 1000 MHz

The SSHPS 0.020-1.000-200 from Aethercomm is a symmetrical SPDT RF switch that operates from 20 to 1000 MHz. It has an insertion loss of less than 0.75 dB, isolation of over 25 dB and a switching speed of 8 usec. The switch can handle up to 200 watts of CW power and operates from a +28 Vdc supply drawing up to 500 mA of current. This switch is available in a module and is ideal for communication and Electronic Warfare (EW) systems applications. The switch operates over a temperature range from -40°C to +70°C and can be used at an altitude of up to 35,000 feet. It meets the conditions specified in MIL-STD-202G, Method 213, Test Condition J (30G, 11mS, 18 Shocks - 3 in each of 6 axes). This unit also meets vibration conditions specified in MIL-STD-20 2G, Method 214A, Test Condition 1 and C. Click here to view specs.

2000 W Solid State Pulsed Amplifier from 0.8 to 2.5 GHz

The 2000SP0z8G2z5 from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled, broadband amplifier designed for pulse applications with low duty factors where instantaneous bandwidth and high gain are required. Operating from 0.8 to 2.5 GHz, it provides more than 2000 W of peak pulse power with a gain of over 63 dB. The 2000SP0z8G2z5 is equipped with a Digital Control Panel (DCP) which provides forward and reflected average power output or forward and reflected peak power, plus extensive system status information accessed through a series of menus via soft keys. All amplifier control functions and status indications can be controlled remotely via GPIB/IEEE-488 format, and Ethernet. The 2000SP0z8G2z5 is available in a contemporary cabinet and can be used for a variety of applications in Test and Measurement, (including EMC RF pulse susceptibility testing), Industrial and University Research and Development, and Service applications. Click here to view specs.

Broadband L & S-band LNA from 1 to 3 GHz

The HILNA LS from NuWaves is a broadband L & S-band low noise amplifier that operates from 1 to 3 GHz. It delivers 50 dB of gain with a noise figure of less than 2 dB and OIP3 of +33 dBm. The HILNA LS is also usable from 500 MHz to 3.75 GHz with 40 dB of gain. The amplifier requires a supply voltage of 5 to 15 V. It is available in a module that measures 2.50 x 1.75 x 0.75 inches with SMA (M/F) connectors is ideal for Wideband RF Front Ends, High-Performance Receivers, Broadband Gain Block, Low Noise Transmit Driver, RF Preamplifier, RF Repeater, and Base Station LNA applications. The HILNA LS is also available with a bias Tee compatible module that eliminates the need for a separate power cable run. This low noise amplifier can be used for small communication system installations that are co-located with the antenna. Click here to view specs.

C-Band Super Low Noise Amplifier with Fault Detection

The APT3-05400590-1010-LS-D4-FAC is a Low Noise amplifier that operates from 5.4 to 5.9 GHz. It provides a P1dB of 12 dBm and a gain of 28 dB with a noise figure of less than 0.9 dB. An internal limiter at the input provides protection of up to 2W CW of RF input power over the full band. There is provision for a Fault Alarm signal via one of the pins on the external MS3112E8-4P connector (used for power) that is triggered by a pre-defined change in current draw. It is available in a module with SMA female connectors and is ideal for receiver front end, radar, Satcom and test equipment applications. Click here to view specs.

Ku-Band MMIC Double Balanced Mixer from 2 to 22 GHz

The MM1-0222H from Marki Microwave is a double balanced mixer with an RF/LO frequency from 2 to 22 GHz and an IF frequency from DC to 3.5 GHz. This Ku-band GaAs MMIC mixer works well as both an up and down converter. It has a conversion loss of 8.5 dB, high LO to RF isolation of 51 dB, and a high input IP3 of 20 dBm across the bandwidth. The MM1-0222H is available both as a wire bondable die and as a connectorized module. This GaAs MMIC mixer covers S through Ku bands and works well as both an upconverter and downconverter. It is ideal for Radars, Satcom, Electronic Warfare, and Test & measurement applications. Click here to view specs.

Wideband Directional Coupler from 20 to 40 GHz

The FPC07181 from Knowles is a Wideband Directional Coupler that operates from 20 to 40 GHz. It has a coupling value of 18.5 to 21.5 dB, an insertion loss of less than 0.3 dB and directivity of over 14 dB. The coupler is available in a surface-mount package that measures 1.651 x 1.27 x 0.254 mm and is available in Symmetrical and Asymmetrical versions. Click here to view specs.

20 dB Directional Coupler from 1 to 12 GHz

The DC-R000-20S from UMCC is a broadband directional coupler that operates from 1 to 12 GHz. This 20 dB coupler provides a directivity of over 13 dB and an insertion loss of less than 0.7 dB. It can handle more than 50 watts of average input power and peak power of 1 kW. This coupler is available in a module with SMA (F) connectors. Click here to view specs.

TNC Female to N Male Between-Series Adapter up to 18 GHz

The 8058-4151-02 from Spectrum Elektrotechnik GmbH is a TNC female (jack) to N male (plug) Between-Series Coaxial Adapter that operates up to 18 GHz. The adapter uses a special heat dissipating dielectric between the center conductor and outer conductor and has cooling fins to dissipate power to the environment. Click here to view specs.

1.0mm (110 GHz) Edge Launch Connectors the Digital Industry

The ELF110 series from Signal Microwave are 1.0mm Edge Launch Connectors for the Digital Industry operating up to 110 GHz. These 50 Ohm connectors can handle a minimum of 500 mating cycles. Click here to view specs.

Benchtop RF Shield Box from 20 MHz to 6 GHz

The HDRF-S860 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. The enclosure has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals. The HDRF-D1260 has a number of user friendly I/O connection options that include HDMI, RJ45, USB, DB9, VGA, DB25 and AC/DC. The shielded box measures 210 x 190 x 425 mm and is ideal for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing. Click here to view specs.

SPDT Pin Diode Switch from 24 to 45 GHz

The ARF2000Q2 from Altum RF is an SPDT Pin Diode Switch designed for millimeter-wave 5G network applications operating from 24 to 45 GHz. This switch has an insertion loss of 1.5 dB and an isolation of over 25 dB. It can handle up to 1 W of input power and has a control voltage from 3.3 to 15 volts. The switch is internally matched to 50 ? with ESD protection. It is available in a 2.5 x 2.5 mm QFN package and is suitable for 5G Networks, Telecommunications, and Test & Measurement applications. Click here to view specs.

4-Way Power Divider from 0.698 to 2.7 GHz

The VPD-0627A4 from VidaRF is a 4 Way Power Divider that operates from 0.698 to 2.7 GHz. This power divider can handle up to 30 watts of power and has a low insertion loss of 1.2 dB and high isolation of over 20 dB. It has a low amplitude balance of 0.3 dB and phase balance of 5 degrees. The power divider is available in a module with SMA female connectors. Click here to view specs.

Long Range Bluetooth 5.1 / THREAD / ANT+ / NFC Module with MCU and Antenna

The ISP1907 is an RF module with a built-in antenna designed for classic IoT applications, which use the Bluetooth 5.1 standard for Long-Range Communication and Direction-Finding connectivity. It is based on the Nordic nRF52811 2.4 GHz wireless System on a Chip (SoC) integrating a 2.4 GHz transceiver, a 32-bit ARM Cortex™-M4, with 192 kB flash memory, and 24 kB SRAM and analog and digital peripherals. The module supports multiple protocols including BLE, ANT/ANT+, Thread, Zigbee and a range of proprietary 2.4 GHz protocols including Gazell from Nordic Semiconductor. It also supports a wide range of stacks which include fully qualified BLE stacks for the nRF52 SoC which operate with S112/S132 SoftDevices. The ISP1907 Long Range capabilities enable wireless connectivity over an open field range of up to 400 meters between modules. It is a fully-featured BLE device with embedded 32 MHz Radio and 32 kHz Synchro crystals, a fully integrated RF matching and Antenna and DC-DC conver...Click here to view specs.

Surface Mount Monopole Antenna for LTE-M and NB-IoT Applications

The Splatch SP610 is a surface-mount monopole antenna for embedded LTE (700 MHz bands) and cellular IoT (LTE-M and NB-IoT) applications. This omnidirectional antenna provides a peak gain of 5.1 dBi with an efficiency of more than 60% and can handle an input power of up to 10 watts. The SP610 is available in tape and reel packaging that measures 40 x 10 x 2.8 mm and is designed for reflow-solder mounting directly to a printed circuit board for high-volume applications. It exhibits a low proximity effect and uses a grounded-line technique to achieve outstanding performance when subject to nearby sources of interference. The SP610 is suitable for IoT devices, UMTS, GSM, cellular low-power wide-area (LPWA) network and Sensing & Remote Monitoring applications. Click here to view specs.

Flexible Arm Omnidirectional Antenna for MANET and MIMO Radios

The MG-2200-4900 from Octane Wireless is S & C-band Mini-Gooseneck antenna optimized for MANET and MIMO Radios. This vertically polarized omnidirectional antenna operates from 2.2 to 2.3 / 4.4 to 4.9 GHz and provides a gain up to 6 dBi. It can handle an input power of up to 0.5 watts. The antenna measures 5.1 x 0.56 inches and available with different mounting options with SMA (M) connectors. Click here to view specs.

Versatile All-Surface UHF RFID Tag

The Confidex Silverline Micro is an EPC Global Class1 Gen2 passive UHF RFID tag that operates from 865 to 928 MHz (FCC & ETSI). It is a versatile all-surface RFID label for securing IT and enterprise assets, valuable items or tools. This RFID tag has a read range of up to 1.2 m on metal and up to 1 m on plastic. The tag measuring 55 x 14 x 0.8 mm can also be attached on curved surfaces like liquid bottles and metallic cylinders without affecting its performance. Click here to view specs.

Battery Operated Portable PIM Analyzer Series

The iPA Series of PIM analyzer from Kaelus are battery operated versatile PIM Test Analyzers that can be used in a number of test scenarios. These IEC compliant 40 Watt, rugged testers include a tablet computer in a ruggedized case for remote control. The PIM Testers support a 3rd and 5th order measurement method and have residual PIM of less than -117 dBm/-160 dBc max (<-125dBm/-168dBc typ) (x2 @ 43dBm). The series have a transmit range from 728 MHz to 2690 MHz and a receive range from 689 MHz to 2570 MHz (Multiple frequency configurations available). Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (12 - 18 Sept, 2019)