Latest RF & Microwave Products of the Week (16

28 GHz Band Pass Filter for 5G mm-Wave Applications

The B274MB1S from Knowles is a bandpass filter with a passband from 26.5 to 29.5 GHz. It has an insertion loss of less than 3.5 dB and a rejection of 40 dB above and below the band. This RoHS-compliant filter operates over a temperature range of -55 to +125°C. It is available in a surface-mount package that measures 11.43 x 2.794 x 2.26 mm and is ideal for 5G mm-Wave applications. Click here to view specs.

350W/550W/1kW X-band Solid State Power Amplifier

The X-band SSPA Series from Teledyne Defence & Space (TDS) are Solid State Power Amplifiers that operate from 9 to 10 GHz. They are available in three different peak output power ratings of 350W, 550W and 1kW with a duty cycle of 10 % and a gain of over 55.5 dB. Designed in a compact, environmentally sealed housing, these SSPAs can be used in any airborne or ground-based environment. Click here to view specs.

GaN-on-SiC Dual-Output Transistor for Aerospace & Telecom Applications

The WG60028D from WAVICE is a dual-output GaN-on-SiC Power Transistor that operates from DC to 6 GHz. It provides 28 Watts of saturated output power with a gain of 15 dB and has a PAE of 35%. This device requires a supply voltage of 50 V. The transistor is available in a surface mount DFN package and is suitable for Infrastructure applications like Aerospace & Defense, Broadcast, and Telecom. Click here to view specs.

Multi-Band LTE CAT1 Module for North America

The SIM7600NA from SIMCom supports B14 (AT&T FirstNet), B71 (T-Mobile), B41 (Sprint), B13(Verizon), and LTE bands covering 4 operators in North America. It is ideal for various IoT applications such as Fleet Management, Telematics, Security, Tracking, Agriculture, Smart Meters, Router, Gateway Management, and is also available with a mPCIe interface. This LTE CAT1 Module has an uplink data rate of up to 5 Mbps and a downlink data rate of up to 10 Mbps. Click here to view specs.

Micro RF Connector for mm-Wave 5G Applications

The 20939-001-R13 (MHF 7 connector) from I-PEX is a Micro RF connector for mm-Wave 5G applications. The connector can operate from DC to 45 GHz with a VSWR of 1.68:1. This MHF 7 connector measures 1.40 (mated height) mm with 30 mm micro-coaxial wire (AWG) and a Receptacle size of 2.1 x 2.0 mm. It has minimum impedance variation. Click here to view specs.

Multi-Octave 15 W Power Amplifier from 6 to 18 GHz

The MS061810 from Microwave Systems is a multi-octave high power GaN amplifier that operates from 6 to 18 GHz. It provides a saturated output power of 15 W with a small signal gain of 46 dB which can be controlled digitally. The wideband amplifier has a built-in output power detector. It is available in a hermetically sealed package that measures 4.68 x 3.06 x 0.87 inches with SMA female connectors. Click here to view specs.

W-Band Power Amplifier from 92 to 96 GHz for CW/Pulsed Applications

The QPP-94043335-00 from QuinStar is a GaAs W-Band Solid State Power Amplifier that operates from 92 to 96 GHz in CW or variable pulsed modes. It provides a P1dB of 33 dBm with a gain of 35 dB. The millimetre-wave (MMW) amplifier has a rise and fall time of less than 25 ns and a duty cycle between 1 and 100%. Its dual-mode operation supports rigorous and dynamic testing protocols. The QPP-94043335-00 is housed in a compact 6.75 x 8.25 x 3.5 inches module with a WR-10 waveguide interface at the input/ output. Click here to view specs.

500 W Solid State Amplifier from 10 kHz to 250 MHz

The 500A250D is a self-contained, air-cooled, broadband solid-state amplifier that operates from 10 kHz to 250 MHz. The amplifier provides an output power of more than 500 watts from 0.01 to 250 MHz. It has been designed for applications where instantaneous bandwidth, high gain and linearity are required. This device has a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. Click here to view specs.

700 W, Ka-band Pulsed TWT Power Amplifier

The dB-3709I from dB Control is a Ka-band Pulsed TWT amplifier that operates from 34.5 to 35.5 GHz. It provides a peak output power of 700 W at a 10% maximum duty cycle and has a pulse width of 0.2 to 20 usec with a maximum PRF (Pulse Repetition Frequency) of 25 kHz. The TWT Amplifier is available in a rackmount configuration that measures 26 x 14 x 14 inches with a WR-28 Waveguide Flange at the input and output. It has Ethernet, RS-485, RS-422, RS-232 control interfaces. Click here to view specs.

Precision 350 MHz Signal Generator/Frequency Synthesizer

The Model 425A from Novatech is a precision frequency and phase agile Synthesized Signal Generator that operates from 250 kHz to 350 MHz. It can generate Sine, LVCMOS, and LVDS output signals simultaneously up to 350 MHz in 10 µHz steps with a phase noise of -133 dBc at 10 kHz offset. The output frequency can be controlled from a serial port. The frequency synthesizer has an integrated ±1.5ppm on-board TCXO clock. Click here to view specs.

10 KHz to 1500 MHz, 20 W Bias Tee

The BT-1510-S is a Bias Tee from UMCC that operates from 10 kHz to 1500 MHz. It has a low insertion loss of less than 0.9 dB, isolation of over 30 dB and a VSWR of 1.35:1 through the band. The bias tee can regulate a bias voltage of up to 100 V and a bias current of up to 400 mA. It can handle up to 20 Watts of RF power. The BT-1510-S is available in a module with SMA female connectors for the RF and RF/DC ports and a solder pin for the bias port. Click here to view specs.

250 W RF Isolator from 700 to 800 MHz

The IS-0.750-M01 from MECA is an RF isolator that operates from 700 to 800 MHz. It provides isolation of over 17 dB and has an insertion loss of 0.5 dB. The isolator can handle up to 250 Watts of average power and 500 Watts of peak power with a VSWR of less than 1.30:1. It is available in a module with SMA-Female connectors. Click here to view specs.

1.5 Gbps Point-to-MultiPoint 3.5 & 5 GHz Backhaul Solution

The JET DUO from RADWIN is a Point-to-MultiPoint (PtMP) microwave link that operates in the 3.5 GHz (SLA business) and 5 GHz (Residential) frequency bands. It delivers up to 1.5 Gbps of throughput using RADWIN’s exclusive Bi-BeamTM air interface. The link supports BPSK/QPSK/16QAM/64QAM/256QAM modulation with channel bandwidths up to 80 MHz. It has a range of up to 40 km/25 miles. Click here to view specs.

25 W Broadband Power Amplifier from 1.7 to 2.5 GHz

The RCA1725H44D0 from RFcore is a Broadband Power Amplifier that operates from 1.7 to 2.5 GHz. It delivers more than 25 W of saturated output power with a gain of over 43 dB. This CW amplifier has an enable/disable switching time of less than 10 us and requires a 28 V of DC supply. It is available in a module that measures 155 x 105 x 28 mm with SMA (F) connectors. Click here to view specs.

Low Noise Amplifier for PCS, GPS, Wi-Fi, and 4G/5G Receivers

The APT3-00500600-1010-D4-GW from AmpliTech is a Low Noise Amplifier that operates from 0.5 to 6 GHz (usable to 100 MHz). It provides an output power of 12 dBm and gain of 30 dB with an ultra-low noise figure of 0.8 dB. The amplifier requires a supply of 12 Vdc while consuming 115 mA of current. It is available in a drop-in package with SMA female connectors and is ideal for SATCOM, microwave radio systems and GPS, PCS, Wi-Fi, 4G/5G Receiver Front End applications. Click here to view specs.

High Pass Filter with Cutoff Frequency from 2.3 to 10 GHz

The WHNX6-2300-10000-80-26500-3 from Wainwright Instruments is a High Pass Filter with a passband from 2.3 to 26.5 GHz. The cutoff frequency (Fco) of the filter can be customized between 2.3 to 10 GHz. This filter has an insertion loss of under 1.2 dB and a stopband attenuation of over 80 dB. The HPF can handle an input power of up to 3 watts CW. It is available in a module with connector that measures 31 x 10 x 10 mm with PC 2.92 male/female connectors. Click here to view specs.

Surface Mount Band Pass Filters from 5 to 40 GHz

The LCP-STL Series from Lark RF Technology are Band Pass Filters that operate from 5 to 40 GHz with bandwidth from 10-25%. These filters are matched to 50 ohms and can be customized to have between 5 to 11 sections. They are manufactured using LCP (Liquid Crystal Polymer) which is a high-performance thermoplastic material with excellent electrical and mechanical properties such as stable dielectric constant, low dissipation factor up to 110 GHz, low moisture absorption, and low coefficient of thermal expansion. Click here to view specs.

10 to 50 MHz TCXOs with HCMOS / Clipped Sine Output

The IQXT-210 Series from IQD Frequency Products are TCXOs that operate from 10 to 50 MHz. They have a control voltage of 1.5±1.5V, frequency stability from ±0.05 to ±1.00ppm, and provide an HCMOS or clipped sine waveform at the output. These TCXOs have a phase noise of -148dBc/Hz @ 100kHz and operate over a temperature range of -20 to 85ºC. These RoHS-compliant TCXOs are available in a surface-mount package. Click here to view specs.

DC to 2 GHz Line Stretcher with 15 Degrees Phase Adjust

The 3428T from ARRA is a Line Stretcher that operates from DC to 2 GHz. It provides a phase adjustment of 15° / GHz and has an insertion loss of under 0.5 dB. The Line Stretcher can handle an average input power of up to 100 Watts and is available with SMA female connectors. Click here to view specs.

Wi-Fi 6 SoC for Access Points

The 88W9068 from NXP Semiconductors is an 8x8 Wi-Fi 6 SoC for access points, broadband gateways and fixed wireless service applications. It supports full MU-MIMO and OFDMA uplink and downlink capabilities thereby increasing channel capacity in both directions. The SoC supports a peak data rate of 4.8 Gbit/s and has a flexible architecture that guarantees 802.11ax standard compliance. Click here to view specs.

5-in-1 Vehicular Antenna for GPS, MIMO LTE & MIMO Wi-Fi

The G44WW-17SSSRR from RFMAX is a 5-in-1 vehicular antenna with one GPS, 2 x 3G/4G/LTE, and 2 x WiFi/WLAN antenna elements for enhanced cellular & Wi-Fi MIMO performance. This rugged, low profile antenna is optimized for use with today's high data-rate cellular modems, including Sierra Wireless Airlink GX450 and Cradlepoint IBR900 & IBR1100. The IP67 rated antenna includes a stainless steel stud for through-roof or trunk mounting or can use magnetic mounting. Click here to view specs.

RF Shielded Test Enclosure from 20 MHz to 6 GHz

The HDRF-1560-C from RF Electronics is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides isolation of over 120 dB at 3 GHz. The test enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals. The HDRF-1560-C has a number of user-friendly I/O connection options that include HDMI, RJ45, USB, DB9, VGA, DB25 and AC/DC. Click here to view specs.

Ka-Band BUCs for Mobile & SATCOM Terminals

The BUC series from Alga are Ka-Band Block Up Converters that can be used for commercial and military applications. These BUCs have two LO’s that can upconvert an input frequency from 1000 to 1500 MHz to an output frequency from 29.5 to 30 GHz in the commercial band and an input frequency from 1000 to 2000 MHz to an output frequency from 30 to 31 GHz in the military band. These BUCs deliver an output power from 8 to 16 W with a gain of more than 70 dB. Click here to view specs.

C-Band Transceiver for VSAT Networks

The AM-9443 Series from Amplus Communications is a C-Band Transceiver for VSAT Networks. It has a Tx frequency from 5850 to 7025 MHz and Rx frequency from 3400 to 4800 MHz. While transmitting it provides an output power of up to 60 dBm with a gain of over 66 dB. While Receiving it provides a gain of up to 45 dB with 30 dB of gain adjustment. The transceiver can be controlled through RS232/485, TCP/IP & FSK Interfaces. It is available in weatherproof IP65 Package. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (16 - 22 Jan, 2020)