Latest RF & Microwave Products of the Week (19

28 GHz GaN Front End Module for Fixed Wireless 5G Base Stations

The QPF4001 is a GaN front-end module (FEM) for 28 GHz phased array 5G base stations and terminals. It integrates a high linearity LNA, a low loss transmit/receive switch and a high-gain, high-efficiency multi-stage PA in a single MMIC. The FEM operates from 26 GHz to 30 GHz. The receive path (LNA + TR SW) is designed to provide a gain of 17 dB and a noise figure of 3.5 dB. The transmit path (PA + SW) provides a small signal gain of 27 dB with high linearity of 35 dBc ACPR and low EVM of 3% at 23 dBm average output power, while supporting a peak power of 1 Watt. Click here to view specs.

X-Band Space-Qualified Isolator from 7.90 to 8.40 GHz

The DS1007 from DiTom Microwave is an X-band space-qualified isolator that operates from 7.90 to 8.40 GHz. It has an insertion loss of less than 0.4 dB and an isolation of more than 20 dB. The isolator can handle up to 10 W of forward power and 30 W of peak power. This isolator is available in a module that measures 0.50 x 0.70 x 0.50 inches with SMA (F) connectors. Click here to view specs.

Customizable All-in-One RF Test System up to 20 GHz

The S-Series Pro from Elite RF is an All-in-One RF Test System that operates up to 20 GHz. The test setup can be customized to contain a range of test equipment including a Real-Time Spectrum Analyzer, Vector Network Analyzer, Signal Generator, RF Power Meter and other devices. This RF test system is a flexible alternative to expensive & bulky RF test equipment and can be used for R&D characterization on the bench, EMC assessment and automated production test in the factory. Click here to view specs.

Ku-Band SATCOM Transmitter IC from 12.5 to 15 GHz

The F6501 from IDT is an 8-channel transmitter (TX) silicon IC designed for Ku-Band SATCOM phased array applications from 12.5 to 15 GHz. The core IC has 360° 6-bit phase control coupled with 35 dB 6-bit gain control on each channel to achieve fine beam steering and gain compensation between radiating channels. The device has 25 dB of nominal gain and an OP1dB of over 13 dBm. The core chip achieves an RMS phase error of 3° and an RMS gain error of 0.4 dB over the frequency of operation. Click here to view specs.

2-Port Computer Controlled Metrology-Grade VNA from 300 kHz to 18 GHz

The M5180 is a 2-port compact metrology-grade performance VNA from Copper Mountain Technologies that operates from 300 kHz to 18 GHz. This VNA is available in a more economical package that excludes a number of advanced features. It has a dynamic range of 130 dB and can measure up to 200,001 test points with a speed of 30 µs per point. This Vector Network Analyzer is small, can be powered by a battery, and is ideal for use in laboratory and production testing in a variety of applications including filter tuning, antenna test and characterization, amplifier testing, etc. Click here to view specs.

Real-Time Spectrum Analyzer and RF Recorder from 9 kHz to 6 GHz

The BB60C is a Real-Time Spectrum Analyzer and RF Recorder that operates from 9 kHz to 6 GHz. It has a realtime bandwidth of 27 MHz and a resolution bandwidth of up to 10 MHz. The Signal Hound BB60C is ideal for real-time spectrum monitoring, manufacturing process control, interference hunting, spread spectrum signal analysis, capturing intermittent events, and general-purpose spectrum analysis. Click here to view specs.

GaAs Distributed Low Noise Amplifier from DC to 40 GHz

The CMD242K4 from Custom MMIC is a wideband GaAs MMIC distributed low noise amplifier that operates from DC to 40 GHz. The amplifier delivers greater than 10.5 dB of gain with a corresponding noise figure of 5 dB and output 1 dB compression point of 17.5 dBm at 20 GHz. It is available in a leadless surface SMT package that measures 4 x 4 mm. The CMD242K4 is internally matched to 50 ohms which eliminate the need for RF port matching. Click here to view specs.

Multi-protocol Bluetooth 5.0/Bluetooth low energy/ANT/2.4GHz SoC

The nRF52832 SoC is a powerful, highly flexible ultra-low power multiprotocol SoC that supports Bluetooth low energy, ANT and 2.4 GHz applications. It is built around a 32-bit ARM Cortex-M4F CPU with 512 kB + 64 kB RAM. This SoC requires a supply between 1.7 V - 3.6 V and has a comprehensive system of automated and adaptive power management features. This chip has a NFC-A tag interface, simplifying the process of authenticated pairing between two Bluetooth devices by exchanging authentication information over an NFC link. Click here to view specs.

GNSS Location IC with an Integrated Sensor Hub

The BCM47755 from Broadcom is a single-chip device that combines location awareness capabilities with the typical functions of a sensor hub. The combination provides synergistic benefits that cannot be achieved with multiple ICs, such as low power consumption, higher accuracy, reduced footprint and a smaller BOM. It is capable of centimetre accuracy with minimal power consumption and has a small footprint, enabling an entirely new suite of high-precision Location-Based Service applications including lane-level vehicle navigation and mobile augmented reality (AR). Click here to view specs.

31.5 dB MMIC Digital Attenuators from 0.1 to 40 GHz

The 4209 Series from API Technologies - Weinschel are MMIC digital attenuators that operate from 0.1 to 40 GHz. They have an attenuation range of 0 to 31.5 dB in 0.5 dB steps and can handle an input power of up to 28 dBm. These attenuators can be controlled using parallel (TTL compatible), I2C, SPI, UART, or USB interfaces making them ideal for ATE systems simulating RF fading for 2G/3G/4G LTE and 5G in MIMO, WiMAX and WiFi system design. They are available in a module with 2.4 and 2.92 mm female connectors. Click here to view specs.

5 Watt Solid State Power Amplifier from 10 kHz to 1000 MHz

The 5U1000 from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled, broadband amplifier that operates from 10 kHz to 1000 MHz. The amplifier provides an output power of more than 5 watts when used with a sweep generator and a gain of over 37 dB. This amplifier is designed for applications where instantaneous bandwidth, high gain, and linearity are required. Click here to view specs.

Single RF Transceiver for 2G/3G/4G/5G Applications

The ADRV9009 is a highly integrated RF transceiver that supports all existing cellular standards and is tunable over a range of 75 MHz to 6 GHz. The 200 MHz bandwidth IC has integrated dual transmitters and receivers, integrated synthesizers, and digital signal processing functions. The device can be powered directly from 1.3 V and 1.8 V regulators and is controlled via a standard 4 wire serial port. Click here to view specs.

Dual Band (Twin) Base Station Antenna from 1710 to 2690 MHz

The S-Wave EW/EW-65-18DV10 from Rosenberger is a Base Station Antenna that operates from 1710 to 2690 MHz. It is available in a twin configuration, so two antennas that cover the frequency range are integrated in to the panel. The antennas deliver a gain of up to 18 dBi and can handle an input power of 300 watts. The antenna panel measures 1250 x 295 x 115 mm is available with 7-16 DIN female connectors. Click here to view specs.

Broadband L & S-band LNA from 1 to 3 GHz

The HILNA LS from NuWaves is a broadband L & S-band low noise amplifier that operates from 1 to 3 GHz. It delivers 50 dB of gain with a noise figure of less than 2 dB and OIP3 of +33 dBm. The HILNA LS is also usable from 500 MHz to 3.75 GHz with 40 dB of gain. The amplifier requires a supply voltage of 5 to 15 V. It is available in a module that measures 2.50 x 1.75 x 0.75 inches with SMA (M/F) connectors is ideal for Wideband RF Front Ends, High-Performance Receivers, Broadband Gain Block, Low Noise Transmit Driver, RF Preamplifier, RF Repeater, and Base Station LNA applications. Click here to view specs.

100 W, 90 Degree Hybrid Coupler from 1 to 8 GHz

The QH10828 from Werlatone is a 90 Degree Surface Mount Hybrid Coupler that operates from 1 to 8 GHz. It can handle up to 100 watts of CW power, has an insertion loss of under 0.9 dB, isolation of over 17 dB and a VSWR of 1.40:1. This 3 dB surface mount coupler has a phase balance of +/- 5 Degrees and amplitude balance of +/- 0.7 dB. Click here to view specs.

Inner-Outer DC Block from 400 to 4000 MHz

The 502-1B from MECA is an Inner/Outer DC block that operates from 0.4 GHz to 4 GHz. It has an insertion loss of 0.5, a VSWR of 1.25:1 and can handle a power of up to 100 W. It is ideal for eliminating unwanted DC voltages or surges to tower top amplifiers and sensitive lab equipment. The 502-1B has brass nickel-plated connectors and is available in BNC configuration. Click here to view specs.

3.4 to 3.6 GHz Hybrid GaN PA for 5G Massive MIMO Applications

The RTH343610X is a GaN hybrid power amplifier module that operates from 3400 to 3600 MHz. It has been designed for 5G Massive MIMO systems, small cells, base station and low power remote radio head applications. This fully matched 2-staged Doherty GaN power amplifier module can deliver up to 10 Watts of power with a gain of 28.5 dB and an efficiency of 42%. It is available in a 15.8 x 10.8 x 4.2 mm surface mount package which provides excellent thermal dissipation. Click here to view specs.

35 W, 9 to 11 GHz GaN MMIC HEMT for Radar & CW Applications

The CMPA901A035F from Wolfspeed is an X-band GaN on SiC HEMT transistor that operates from 9 to 11 GHz. It provides an output power up to 35 W with a small signal gain of 31 dB and power gain of over 22.7 dB. It has an efficiency of 35% and requires a 28 V power supply. The transistor is designed specifically for high efficiency, high gain, and wide bandwidth capabilities and is available in a 10-lead ceramic/metal flange package that measures 25 x 9.9 mm. It is ideal for Military Radar, Marine Radar, Weather Radar, and Medical applications. Click here to view specs.

1000W X-Band GaN SSPA/BUC for Military Applications

The Taurus-Line X-Band 1000W from Advantech Wireless is an X-Band GaN BUC/SSPA that upconverts an input frequency from 950 to 1450 MHz to 7.9 to 8.4 GHz. It delivers an output power of 1000 watts with a gain of more than 70 dB. This BUC is perfectly suited for harsh environments and is both designed and manufactured to meet stringent military requirements. The device is available in a module that measures 16 x 22.3 x 7.7 inches and is an ideal solution for both mobile and fixed communication terminals. Click here to view specs.

DC to 2500 MHz Dual Rotary Attenuator

The 50DR-046 from JFW Industries is a Dual Rotary Attenuator that operates from DC to 2500 MHz. This manual step attenuator has an attenuation range from 0 to 50 dB which can be adjusted in 1 dB steps using a small knob and 10 dB steps using the larger knob. It can handle up to 2 watts of power and is available with BNC, N or SMA connectors. The attenuator has four mounting holes in the front plate to allow for panel mounting. Click here to view specs.

High Power SPDT Switch for 28 GHz, 37 GHz and 39 GHz 5G Applications

The MASW-011098 is a high power SPDT PIN switch that operates from 26 to 40 GHz. The switch can handle up to 7 watts of power while maintaining low insertion loss and high isolation. Its frequency range makes it ideal for 5G Applications in the 28 GHz, 37 GHz and 39 GHz bands. The MASW-011098 leverages MACOM&rsquos patented AlGaAs technology process to ensure superior mmWave switch performance, maintaining low insertion loss and high isolation while enabling higher power-per-element ratios for 5G demonstration systems. Click here to view specs.

RAIN RFID UHF Reader Module with Four Antenna Ports

The Indy RS2000 is a RAIN RFID UHF reader module that has a receiver sensitivity of -74 dBm and provides output power from 10 to 31.5 dBm. It has four antenna ports that enable a diverse range of fixed and mobile readers for inventory management, asset tracking, logistics, and industrial automation. The module is available in a 38 x 52 x 4 mm package and has a 10 meters read range. The package design allows it to be attached to a PCB using standard surface mount technology (SMT), with no need for additional connectors or mounting hardware. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (19 - 25 Dec, 2019)