Latest RF & Microwave Products of the Week (19

Crush Resistant Coaxial Cable Assemblies up to 70 GHz

The LU5 Series from Rosenberger are Microwave Cable Assemblies that operate up to 70 GHz. These cable assemblies are designed in such a way that they can withstand pressures of up to 1000 N when subjected to harsh conditions. They can handle up to 59 watts of power and have a phase stability of up to 7 degrees. Click here to view specs.

Surface-mount Circulators from 290 MHz to 15 GHz

The Surface Mount Circulators from UIY are operate from 290 MHz to 15 GHz. They have an insertion loss of below 0.6 dB, isolation of over 18 dB, and can handle up to 200 watts of forward power. These circulators are available in a module with SMT connectors as standard products and can also be ordered as a custom module. They are suitable for Military, Space & Commercial applications. Click here to view specs.

MMIC Balun Transformer from 10 to 24 GHz for SATCOM Applications

The MTY2-243+ from Mini-Circuits is an MMIC Balun RF Transformer that operates from 10 to 24 GHz. Fabricated using HBT process technology, this transformer has an insertion loss of less than 2.2 dB, phase unbalance of 6 degrees and an amplitude unbalance of 0.7 dB. The device can handle an input power of up to 31 dBm and has a VSWR of 2:1. This RoHS-compliant transformer is available in a QFN package that measures 2 x 2 x 1 mm and is ideal for use in radars, Satcom, and instrumentation applications. Click here to view specs.

Global Multi-Band LPWA, LTE-M, and NB-IoT Cellular Chipset

The UBX-R5 Series from u-blox is a Global Multi-Band Cellular Chipset that supports LPWA, LTE-M and NB-IoT technologies. It is optimized for IoT applications such as smart metering, telematics, tracking, security systems, building automation, as well as smart lighting solutions and connected health. It implements key features of 3GPP Release 14, answering the need for longevity in IoT solutions. This chipset has a downlink data rate of 375 kbit/s and an uplink data rate of up to 1200 kbit/s. The UBX-R5 chipset includes integrated RF, baseband, power management, and RAM and supports several power-saving functionalities, such as PSM and eDRX. Further, it supports enhanced LTE coverage via CE Mode A and B for LTE-M, and ECL1 and ECL2 for NB-IoT, achieving deeper penetration inside buildings and underground. The UBX-R5 includes the hardware-based root of trust (RoT) integrated into a discrete secure element compliant with EAL5 to offer unmatched built-in end-to-end security. The 5G-re...Click here to view specs.

Multi-Band 5G NR/ LTE-FDD/ LTE-TDD and HSPA+ Module

The SIM8200G from SIMCom is a Multi-Band 5G NR/LTE-FDD/LTE-TDD and HSPA+ Module. It is suitable for high throughput data communication applications in a variety of radio propagation conditions. This LTE Cat22 module supports GPS/GLONASS/BeiDou/Galileo/QZSS services. The sub-6G module supports R15 5G NSA/SA modes and uplink 2 carrier aggregation (UL 2xCA) technology. It has an uplink data rate of up to 450 Mbps and a downlink data rate of up to 4 Gbps. The SIM8200G has a strong extension capability with multiple interface options including UART, PCIe, USB3.1, GPIO etc. It is available in an LGA package that measures 41 x 43.6 x 2.8 mm. This RoHS-compliant module is available with CCC, CTA, SRRC, REACH, CE, FCC, GCF, and RCM approvals. Click here to view specs.

UWB Wireless Transceiver IC from 3.1 to 6 GHz

The SPARK SR1010 is a Bi-Directional Short Latency Wireless Transceiver IC that operates in the license-free UWB band from 3.1 to 6 GHz, enabling efficient and robust wireless communications. This UWB transceiver achieves 40x better energy efficiency, 60x lower latency, and 10x more data throughput as compared to BLE. Its raw data rate can be continuously scaled from 1 kbps to 10 Mbps, enabling high throughput applications such as audio/video. The versatile device delivers 10 dBm of peak Tx power and can send 1 Kbps of data in 50 microseconds, yielding significantly shorter wireless latency in a wide range of applications, such as audio streaming. This transceiver consumes 1.5 nJ/ bit of energy efficiency at up to 10 Mbps. The Spark SR1010 Radio allows for the dynamic shaping of its output spectrum to comply with international UWB emission limits. The receiver is designed to reject narrow-band signals, such as WiFi or BLE, and the very low transmitted emission levels that are inher...Click here to view specs.

Low Loss Cables with Triple Shielding Operate up to 40 GHz

The NextPhase Cables from Megaphase are Low Loss Cable Assemblies that operate up to 40 GHz. They are designed for general-purpose interconnect applications that require low loss and triple shielding. These assemblies provide over 90 dB of shielding effectiveness (cable only) and can withstand up to 15 kV at 60 Hz. The cables are available in a wide variety of diameters to accommodate a wide range of design requirements in terms of bend radii, weight, and power performance. They are suitable for ATE, ground- and air-based EW applications. Various connectors options are also available. Click here to view specs.

5 Watt S-band SSPA form 2200 to 2500 MHz

The NW-PA-S-5-Q01 from NuWaves is a Solid State Power Amplifier that operates from 2200 to 2500 MHz. This S-band amplifier delivers an output power of over 5 watts with a small signal gain of 27 dB. Based on the latest gallium nitride (GaN) technology, this amplifier offers 17 discrete, user-programmable, output options in 1 dB steps from the maximum RF output power level. It operates over a DC supply voltage from 22 to 32 V and consumes 1 amp of current. The device is available in a module that measures 2.125 x 5 x 0.8 inches with SMA (F) connectors and can be remotely controlled via RS-232 interface. This amplifier is ideal for use in Unmanned aircraft systems (UAS), unmanned Group Vehicles (UGV), broadband RF telemetry, RF communication systems, software-defined radios, and test lab applications.111 Click here to view specs.

95.75 dB Solid State Programmable Attenuator from 0.3 to 8000 MHz

The 4205B-95.5 from API Technologies - Weinschel is a Solid State Programmable Attenuator that operates from 0.3 to 8000 MHz. It has an attenuation range from 0 to 95.75 dB with a step size of 0.25 dB and can handle up to 28 dBm of CW power. The attenuator can be controlled using parallel (TTL compatible), I2C, SPI, UART, or USB interfaces. This RoHS-compliant module is available in a module with SMA (F) connectors and is ideal for use in Automated Test Equipment (ATE), 2G / 3G / 4G LTE / 5G fading simulators, test labs, MIMO, WIMAX, and WiFi applications. Click here to view specs.

90-degree Hybrid Coupler from 1 to 4 GHz

The VHC1040A from VidaRF is a 90-degree Hybrid Coupler that operates from 1 to 4 GHz. The device has an insertion loss of 0.6 dB and an isolation of 22 dB. It has an amplitude balance of ±0.50 dB and a phase balance of ±5 degrees. This coupler can handle an input power of 50 watts and has a VSWR of 1.25:1. It is available in a module with connectors. Click here to view specs.

mm-Wave Coaxial Horn Antenna from 6 to 67 GHz

The QRH67 from RFspin is an mm-Wave Coaxial Horn Antenna that operates from 6 to 67 GHz. It can transmit and receive signals with high sensitivity across the full 61 GHz bandwidth. This dual-polarized antenna can handle input power levels as high as 5 W CW and 10 W peak. The compact antenna is available with a 1.85-mm coaxial connector for continuous frequency coverage with a low VSWR (less than 2.0:1) across its full frequency range. It is ideal for a wide range of millimeter-wave applications, including line-of-sight (LoS) communication links, aerospace and defense systems, scientific research, and medical electronics systems. It is especially useful for broadband test applications, including evaluating automotive millimeter-wave radar systems and over-the-air (OTA) testing of Fifth Generation (5G) cellular wireless microcells operating above 6 GHz. Click here to view specs.

2.4 GHz Integrated FEM for Wi-Fi-6 Applications

The QPF4216 from Qorvo is an integrated front end module (FEM) designed for Wi-Fi 6 (802.11ax) systems. It integrates a 2.4 GHz power amplifier (PA), regulator, a single pole two throw switch (SP2T), and a bypassable low noise amplifier (LNA) into a single device. This FEM also integrates a logarithmic power detector, which enables power control across the entire power spectrum. It also features integrated die level filtering for 2nd and 3rd harmonics as well as 15 dB 5 GHz rejection on the RF path for DBDC operation. The QPF4216 provides a transmit gain of 32 dB, receive gain of 15.5 dB and has a noise figure of 1.8 dB while operating over a 5 V supply. It is available in a 5 x 3 mm 24-pin LGA package and is ideally suited for Access Points, Wireless Routers, Residential gateways, Customer Premise Equipment, and Internet of Things (IoT) applications. Click here to view specs.

0.1 to 5 GHz Downconverter Mixer for High-linearity Receivers

The GRF7034 from Guerrilla RF is a Linear Downconverter Mixer with an integrated LO buffer and IF amplifier. The LO/ RF and IF frequencies of this Mixer can be tuned between 0.1 to 5 GHz. It has a conversion gain of 11.8 dB, an SSB noise figure of 8 dB, and an input IP3 of 11 dBm. The GRF7034 inputs and outputs are single-ended and internally matched to 50 ohms. The mixer has a flexible bias voltage and the integrated LO buffer and IF amplifier are operated from a single positive supply of 3 V. It is available in a 2.0 x 2.0 mm QFN-12 package and is ideal high-linearity receiver applications. Click here to view specs.

24 GHz Transceiver MMIC for Automotive Radar Sensor

The STRADA431from ST Microelectronics is a 24 GHz ISM-Band Transceiver MMIC for Automotive Radar sensor applications. This single-chip transceiver consists of one differential RF transmitter that delivers 13 dBm of power and three single-ended Rx channels. It includes a Voltage Controlled Oscillator (VCO) and a Power Amplifier (PA) in the Transmitter section and a Downconverter, Variable Gain Amplifier (VGA), and Band Pass Filter (BPFs) in the Receiver section. The device provides a programmable conversion gain of up to 60 dB and has an SSB noise figure of 11 dB. It has integrated LDOs and can be operated by a single power supply at 3.3 V. The AEC-Q100 qualified device is fully configurable via a 4-pin SPI and is available in 40-lead, 6 x 6 mm QFN package. Click here to view specs.

10 MHz to 40 GHz, Phase Coherent, Multi-Channel RF Synthesizers

The HSX Series are broadband, phase coherent frequency sources that are available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz and 40 GHz. They have industry leading phase noise and spectral purity performance coupled with a highly accurate dynamic range from -110 to 20 dBm. They are available in 1, 2, 3 or 4 channel Custom COTS models that can be ordered with any combination of frequency options. The HSX Series exhibits optimal phase coherency between each channel providing the ultimate in channel-to-channel stability. Click here to view specs.

32 Watts GaN Power Amplifier Module from 300 to 6000 MHz

The TA1216 from Triad RF Systems is a GaN Power Amplifier Module that operates from 300 to 6000 MHz. This class AB amplifier delivers an output power of 32 watts with a gain of 45 dB. It operates over a DC supply voltage from 12 to 28 V and draws 4 A of current. The device is capable of supporting any signal type and modulation format including but not limited to 3-4G telecom, WLAN, OFDM, DVB, and CW / AM / FM. Designed for use with simple CW to high modulated signals, this PA is available in a module that measures 3.75 x 2.5 x 0.8 inches with SMA (F) connectors and optional heatsink. The amplifier is ideal for use in software-defined radios, general-purpose RF amplification, commercial/military radio systems. Click here to view specs.

50 W Ka-Band Block Up-Converter from 30 to 31 GHz

The JNB-KAM050 from Wavestream is a Ka-Band Deck Block Up-Converter that converts an input frequency from 1000 to 2000 MHz to an output frequency from 30 to 31 GHz. It provides a saturated output power of 50 watts (25 W of linear power) with a small signal gain of 62.5 dB. The device operates over an AC supply voltage of 90 to 264 VAC and draws up to 400 watts of power (at linear output power). This BUC is available in a module that measures 12.5 (L) x 14 (W) x 6.5 (H) inches with an N-type female connector at the input and a WR-28 waveguide interface at the output. It has been designed to operate in the most extreme environments and offers field-proven reliability to support satellite communication applications. Click here to view specs.

15 W Termination from DC to 12.4 GHz

The 403-8 from MECA is an RF Termination that operates from DC to 12.4 GHz. It can handle an average power of 15 watts and a peak power of 2 kW. This 50-ohm termination has a VSWR of less than 1.50:1 and is available in a connectorized package that measures 1.90 (Length) x 1.25 (Diameter) inches with an SMA (F) connector. Click here to view specs.

0.9 to 220 nH Surface Mount Ceramic Chip Inductors

The CC0402 Series from Gowanda are Ceramic Chip Inductors with inductance values from 0.9 to 220 nH. They have DCR values from 0.04 to 2 Ohms, Q values from 10 to 25, and self-resonant frequencies (SRF) from 190 to 6000 MHz. These surface-mount inductors have DC current ratings from 37.5 to 1020 mA. The CC0402 Series Inductors are RoHS-compliant and are available in tape (Width: 8 mm) & reel (Dia: 7-inch) packaging with Gold-plated Nickel terminations. Click here to view specs.

Spectrum Analyzer + Vector Network Analyzer from 9 kHz to 7.5 GHz

The SSA3075X from Siglent is a Spectrum Analyzer and Vector Network Analyzer that operates from 9 kHz to 7.5 GHz. The spectrum analyzer has a resolution bandwidth of 1 Hz to 3 MHz and an SSB phase noise of less than -98 dBc/Hz at 1 GHz with a 10 kHz offset. The base model consists of a spectrum analyzer and a vector network analyzer, with optional functions that include a distance to fault locator and a vector signal modulation analyzer. It has a Displayed Average Noise Level (DANL) of -165 dBm/Hz and supports AM, FM and ASK, FSK, PSK, MSK, QAM modulation analysis. This analyzer has a 10.1-inch multi-touch screen and is equipped with a mouse and a keyboard. It is ideal for use in a wide range of applications such as broadcast monitoring/evaluation, site surveying, S parameter measurement, cable and antenna testing, analog/digital modulation analysis, EMI pre-compliance test, research and development, education, production, and maintenance. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (19 - 25 March, 2020)