Latest RF & Microwave Products of the Week (20

Dual-Band Wi-Fi 6E/Bluetooth 5.0 Combo Chip

The BCM4389 from Broadcom is a Wi-Fi 6E and Bluetooth 5.0 Combo Chip designed for low-power mobile devices and AR/VR devices. Wi-Fi 6E extends the Wi-Fi 6 standard to support the soon-to-be-operational 6 GHz band with wider 160 MHz channel bandwidths that double Wi-Fi speeds and cut latency in half compared to Wi-Fi 5. The BCM4389 delivers over 2 Gbps of real-world speeds and has up to five times better battery utilization, making it an ideal solution for flagship smartphones and future AR/VR devices. Click here to view specs.

200 W GaN-Based Pulsed Amplifier from 9.3 to 9.5 GHz

The RRM9395200-56A from RFHIC is a GaN-Based Pulsed Amplifier that operates from 9.3 to 9.5 GHz. This amplifier provides a pulsed output power of 200 watts (100µs, 10% duty cycle) with a power gain of over 55 dB and has a PAE of 20%. It requires a supply voltage of 50 volts and is available in a module with SMA connectors. This amplifier is ideal for use in marine and weather radar systems. Click here to view specs.

2-Way Ku-Band Isolated Splitters for Space Applications

The SpaceNXT MWC Series from Smiths Interconnect are 2-Way Ku-Band Isolated Splitters that operate from 10.7 to 12.8 GHz. This MWC Series is ideally designed for providing the commercial satellite uplink band (downlink also available) with specific attention to achieving phase-stable output amplitude characteristics. They can handle up to 1 watt of power, have an insertion loss of less than 1.4 dB, and isolation of over 20 dB. Click here to view specs.

X-Band Waveguide Low Noise SATCOM Amplifier from 7.1 to 8.5 GHz

The APTW5-07100850-40K10-WR112-D6 from AmpliTech is an X-Band Waveguide Low Noise Satcom Amplifier that operates from 7.1 to 8.5 GHz. It provides a P1dB of 14 dBm with a gain of over 50 dB and a noise temperature of 40 K. It requires a DC supply voltage of 12 to 24 V and draws 190 mA of current. This LNA is manufactured using state-of-the-art PHEMT technology and is available in a module with a WR-112 waveguide interface at the input and coaxial connector at the output. Click here to view specs.

Multi-Band CAT-M and NB-IoT Module for Asset Tracking and Wearables

The SIM7090G from SIMCom is a Multi-Band CAT-M and NB-IoT Module. It is ideal for low power, low latency and low throughput applications like smart metering, asset tracking, wearable products, remote control, smart homes, smart cities, smart agriculture and other Internet of Things industries. The SIM7090G is based on the Qualcomm 9205 LTE modem and provides an uplink data rate of up to 1110 Kbps and a downlink data rate of up to 589 Kbps with support for GPS, Beidou, GLONASS, and Galileo. Click here to view specs.

Wi-Fi Tx/Rx Booster Amplifier from 5150 to 5925 MHz

The AMP51505925-TRX from Becker Nachrichtentechnik GmbH is a Wi-Fi Tx/Rx Booster Amplifier for the 5 GHz Wi-Fi band from 5150 to 5925 MHz. This amplifier consists of a high linearity Tx power amplifier and a low noise Rx amplifier path. The default setting of the internal Tx/Rx switch is Rx (LNA path). An integrated high-speed level detector at the input recognizes transmitter power coming from the access point to set Tx/Rx switch to the Tx (power amplifier path). Click here to view specs.

18 GHz Suspended Stripline High Pass Filter

The AE18000SSH6580 from Anatech is a suspended stripline high pass filter with a cutoff frequency of 18 GHz and a passband from 18 to 40 GHz. The filter has an insertion loss of less than 2 dB with attenuation of more than 50 dB at 15 GHz. It can handle an input power of up to 15 dBm. The high pass filter is available in a module that measures 12.7 x 12.7 x 10.0 mm with SMA female connectors. Click here to view specs.

Diplexer from 617-2180/2300-2700 MHz for Small Cell Applications

The BK-693E from Microlab is a Diplexer with a low passband from 617 to 2180 MHz and a high passband from 2300 to 2700 MHz. It has a low-PIM of -161 dBc, insertion loss of less than 0.5 dB and an isolation of over 60 dB. The diplexer can handle up to 200 watts of input power and is available in an IP67-rated module that measures 5.51 x 4.72 x 1.65 inches and has 4.3-10 (f) Flanged connectors. It is ideal for use in small cells, coaxial distributed in-building cellular networks or D-RAN applications. Click here to view specs.

5G-NR/4G LTE/3G/2G Ultra Wideband Waterproof Antenna

The 2JW1483 from 2J Antennas is a 5G-NR Connector Mount Antenna that operates in three bands (617-960 / 1427-2690 / 3300-3800 MHz). Supporting 5G, 4G, 3G, and 2G technologies, this antenna provides a peak gain of over 0.4 dBi and can handle up to 25 watts of input power. It supports 5G-NR, LTE, FirstNet, CBRS, LPWA, CAT-x, CAT-Mx, CAT-NBx, and NB-IoT standards. The 2JW1483 operates with an efficiency of up to 55.2% while maintaining a stable 360-degree Omni-directional radiation pattern. Click here to view specs.

Multi-Band Miniature Chip Antenna for 5G and IoT Applications

The ONE mXTEND (NN02-201) from Fractus Antennas is a Multi-Band Miniature Chip Antenna that operates from 824 to 5000 MHz, covering 2G, 3G, 4G, and 5G frequency bands. This ultra-compact antenna (the size of a grain of rice) has been specifically designed for providing 5G and cellular IoT operations in multiple cellular bands. It delivers a gain of over 1.3 dBi with an average efficiency of more than 55%. Click here to view specs.

100 dB Continuously Variable Attenuator/ Directional Coupler from 960 MHz to 1.215 GHz

The 2-3954-100 from ARRA is a continuously variable attenuator/directional coupler that operates from 960 MHz to 1.215 GHz. This variable attenuator/coupler has a unique configuration - it consists of a directional coupler with a mainline insertion loss of 1.5 dB and a coupled signal that can be controlled by a variable attenuator. The continuously variable attenuator used on the coupled line has a 100 dB range which can be controlled using a knob. Click here to view specs.

2-Port PXI Based Vector Network Analyzer from 300 kHz to 9 GHz

The PXIe-S5090 is a metrology-grade VNA that has been developed for the National Instruments’ PXI platform. This high-performance vector network analyzer operates from 300 kHz to 9 GHz and allows testing of two-port devices from the bench to the production floor in a compact, modular form factor. It can be used to measure all four S parameters (S11, S21, S12, and S22). With 138 dB dynamic range and +13 dBm maximum power, this VNA is engineered for a short time to the first measurement and also for high-performance automation with fast test times. Click here to view specs.

Handheld Spectrum Analyzer for 5G-NR Applications

The E8900A from Deviser is a Handheld Spectrum Analyzer that operates from 9 kHz to 9 GHz. It performs standard spectrum analysis up to 9 GHz and 5G NR analysis up to 6 GHz. The analyzer has an IF span of 100 MHz and can conduct over 3 Full Sweep scans/second at 7.8 kHz RBW. It also has a range of digital and analog test modes designed to provide a comprehensive picture of the signal environment - including 5G NR gNB demodulation and high-accuracy interference location. Click here to view specs.

30 W Hybrid Power Amplifier from 1 to 6 GHz

The 30HM1G6AB-45 from AR RF/Microwave Instrumentation is a compact hybrid power amplifier module that operates from 1 to 6 GHz. When used with a sweep generator, it provides an output power of more than 30 watts with a gain of 48 dB and excellent flatness, noise figure and intermodulation distortion. This power amplifier can be used for both military and commercial applications. The 30HM1G6AB-45 operates from a single DC voltage of 28V. Click here to view specs.

Wireless SOCs for ZigBee Green Power IoT Applications

The EFR32MG22 Series from Silicon Labs are 2.4 GHz Wireless SOCs optimized for ZigBee Green Power IoT applications. These modules are based on Silicon Labs' Wireless Gecko Series 2 platform and are an ideal choice for Zigbee devices powered by coin cell batteries or energy-harvesting sources. Target applications include smart home sensors, lighting controls, and building and industrial automation. Click here to view specs.

Bluetooth 5.0 Wireless SoC for IoT, Sensing and Audio Applications

The CYW20721 from Cypress is a Baseband Processor SoC with an integrated 2.4 GHz transceiver. It has developed for Bluetooth 5.0 and supports basic rate (BR), enhanced data rate (EDR), BLE, and adaptive frequency hopping (AFH). The low power SoC is intended for use in audio, IoT, sensors (medical, home, security, and so forth), and human interface device (HID) applications. It delivers up to 6 dBm of output power and has a receive sensitivity of -95.5 dBm. Click here to view specs.

GNSS SoC for Asset Tracking and Fitness Applications

The SiRFstar V 5e B02 from Qualcomm is GNSS SoC that is optimized to enable highly accurate location positioning for devices including mobile phones, cameras, and health and fitness products. It supports fully-concurrent GPS, GLONASS, COMPASS, QZSS, Beidou, SBAS and, Galileo constellations. This GNSS SoC ensures high accuracy, embedded extended ephemeris, for faster time to first fix (TTFF). Advanced low power technologies are designed to allow the device to deliver high performance while saving power. Click here to view specs.

DC to 10 GHz Gain Block for Backhaul and Instrumentation Applications

The GRF3016 from Guerrilla RF is a Broadband Gain Block that operates from DC to 10 GHz. This device provides a P1dB of 17 dBm with a gain of 13.5 dB and a noise figure of 5.2 dB while operating at 5 GHz. The resistively biased device uses an external resistor in series with VCC to set a nominal current of 80 mA. It can be operated down to a very low frequency by the selection of suitably large input/output caps and a bias inductor. The GRF3016 is available in a 1.5 x 1.5 mm surface-mount package and is ideal for microwave backhauls, C and X-band amplifiers, general-purpose amplifiers, and instrumentation applications. Click here to view specs.

2 kW LDMOS Power Transistor from 1.8 to 400 MHz

The ART2K0PE from Ampleon is an LDMOS Power Transistor that operates from 1.8 to 400 MHz.It provides a P1dB of 2000 watts with a power gain of 28.5 dB and a drain efficiency of 73%. The transistor has integrated dual-sided ESD protection which enables class C operation and complete switch-off of the transistor. It requires a 65 V power supply and is available in an over-moulded plastic earless flanged package. This transistor is ideal for use in industrial, scientific, medical, radio & VHF TV broadcast transmitters, and aerospace applications. Click here to view specs.

10 to 40 MHz OCXOs for Instrumentation and SATCOM Applications

The XO9014 series from MtronPTI are OCXOs with an oscillation frequency from 10 to 40 MHz. They provide a phase noise of -125 dBc/Hz at 100 Hz offset and have temperature stability of less than +/-10 ppb while operating from -20°C to +85°C. These IEEE 1588 Compliant oscillators require a supply voltage of 3.3 V and provide an LVCMOS waveform at the output. The OCXOs are available in a small SMD package that measures 9.4 x 14.3 x 6.5 mm and can be used as a timing reference for various applications such as instrumentation, downhole seismic, industrial controls, datacom, utility metering, and SATCOM. Click here to view specs.

20-Port Multi-Beam Base-Station Antenna for LTE Cell Site Deployment

The MS-MBA-3.2-H4-L4 from MatSing is a Multi-Beam Base-Station (MBA) Antenna that utilizes a patented spherical lens design with three isolated high-frequency (1710 - 2690 MHz) cross-polarized beams and two isolated low-frequency (698 - 960 MHz) cross-polarized beams. Each beam is made of two independent antennas and has 4 ports. There are two independent tilt settings per beam (0-30° for high-band and 0-40° for Low-band) tilt for each pair of cross-polarized elements. Click here to view specs.

6 dBi, 4-Port OMNI Antenna from 2.5 to 2.7 GHz

The POMNQX-2.7 from Radiowaves is a 4-port Omni-directional Antenna that operates from 2.5 to 2.7 GHz. It provides a gain of up to 6 dBi and has a 45-degree slant polarization. The antenna can handle up to 100 watts of power and has a port to port isolation of 23 dB. This Pseudo Omni-directional antenna is ideal for small cell deployments with a compact design allowing for installation in city-mandated enclosures and street furniture while meeting PIM, gain and isolation requirements. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (20 - 26 Feb, 2020)