Latest RF & Microwave Products of the Week (21

Portable Monitoring Receiver from 8 kHz to 8 GHz

The R&S PR200 is a portable monitoring receiver that operates from 8 kHz to 8 GHz (extended up to 18 GHz with R&S HF907DC SHF handheld antenna). It is an indispensable tool for regulatory authorities, mobile network operators, police forces, military units, and other security organizations. They can use this portable receiver to search for and analyze known and unknown radio emissions and to localize signal sources. The R&S PR200 performs signal processing in two separate paths, each with up to 40 MHz realtime bandwidth, making it possible to simultaneously display the spectrum and analyze in the frequency domain, as well as to display the signal and demodulate in the time domain. This device reliably detects signals with a duration of 1.5 microseconds, so virtually no signal goes undetected. The receiver is ideal for complex signal environments and offers automatic gain control (AGC) to attenuate or amplify the input signal. It can record and reproduce all measured va...Click here to view specs.

0.1 to 40 GHz Low Noise Amplifier

The LNA-30-00104000-75-15P from L3Harris Narda-Miteq is a low noise amplifier that operates from 0.1 to 40 GHz. It provides a gain of more than 30 dB with a noise figure of 7.5 dB and a P1dB of over 15 dBm. The amplifier requires a supply of 15 V and consumes up to 500 mA of current. It is available in a module that measures 0.94 x 0.74 x 0.35 inches with K-type female connectors and is ideal for wireless infrastructure, test instruments, VSAT, military, aerospace applications, and fiber optics applications. Click here to view specs.

High Power Coaxial Attenuator from 925 MHz 1.225 GHz

The 2-3487-30A from ARRA is a continuously variable coaxial attenuator that operates from 925 MHz to 1.225 GHz. This attenuator has an attenuation range of 30 dB and an insertion loss of less than 0.5 dB. It can handle up to 50 watts of average input power and is available in a module with SMA or N-Type connectors. Click here to view specs.

250W Quadplexer for 700/850/PCS/AWS (1-3) Applications

The BK-962 from Microlab is a Quadplexer that allows combination and separation of the signals in frequency bands: 698-798 MHz, 817-894 MHz, 1850-2000 MHz (PCS), and 1695-1780/2110-2180 MHz (AWS). It has low-PIM of less than -161 dBc, insertion loss of under 0.5 dB and isolation of more than 50 dB between the bands. The quadplexer can handle input power of up to 250 W per port. It is available in a module with 4.3-10 & 7/16 DIN connectors and is ideal for base station, coaxial distributed in-building cellular network or DAS applications. Click here to view specs.

80 W Power Amplifier from 3400 to 3800 MHz

The RCA3438H49D0 from RFcore is a High-Power Amplifier that operates from 3400 to 3800 MHz. It provides a saturated output power of 80 Watts and a power gain of over 49 dB while operating from a 28 V DC supply. The amplifier is available in a module that measures 170 x 135 x 25 mm with SMA female connectors. Click here to view specs.

Tunable Band-Pass Filter from 9.75 to 22 GHz

The ADMV8420 is a tunable MMIC band-pass filter with a passband from 9.75 to 22 GHz. The filter has a 3 dB bandwidth of approximately 20% of the center frequency. The center frequency (fc) of the filter can be varied between 11 and 20 GHz by applying a tuning voltage from 0 V to 15 V. The filter provides a rejection of more than 20 dB above and below the pass band. It is available in a 24-lead LFCSP package that measures 4 x 4 mm and is suitable for test and measurement equipment, military radar, electronic warfare, and video satellite (VSAT) communications applications. Click here to view specs.

2.5 GHz Low Power Amplifier Module

The AFLP5G25641 from NXP is a power amplifier module that operates from 2300 to 2700 MHz. It has three stages of amplification and supports circuitry to work at 3.3 V or 5 V with very low power consumption. This device delivers a P1dB of 25 dBm at 3.3 Vdc and a P1dB of 29 dBm at 5 Vdc with a gain of 32 dB while operating at 2500 MHz. The amplifier is available in a 4 x 3 mm LGA package and includes a 1.8 V logic control pin for bias enable/disable TDD operation. Click here to view specs.

24 to 27.5 GHz Doherty MMIC Power Amplifier

The ICD2629 from ICONIC RF is a two-stage Doherty MMIC power amplifier (PA) that operates from 24 to 27.5 GHz. It provides a saturated output power of 28.5 dBm with a gain of 13 dB and an efficiency of 20% at 8 dB output power backoff (OBO). The amplifier is manufactured using an enhancement mode 0.15µm GaAs technology with integrated 50 ohm matching circuits and DC blocking. This amplifier is available in a chip that measures 1.7 x 1.65 x 0.10 mm and is suitable for 5G Phased array antenna systems applications. Click here to view specs.

4.3-10 Bulkhead Coaxial RF Surge Protector from 698 MHz to 2.7 GHz

The TSX-4310FF-P from PolyPhaser is a 4.3-10 F/F Bulkhead Coaxial RF Surge Protector that operates from 698 MHz to 2.7 GHz. It has a low PIM of -173 dBc and VSWR as low as 1.12:1. The device can handle an input power of up to 500 W and has the multi-strike capability. It can handle surge currents of up to 40 kA. This 4.3-10 surge protector is IP67-rated for outdoor use and can be used in emergency response systems, cellular communications, industrial communications, and public safety systems. Click here to view specs.

High Precision GNSS Module for UAV Applications

The ZED-F9P is a multi-band GNSS module with integrated multi-band Real Time Kinematics (RTK) technology for machine control, ground robotic vehicles, and high precision unmanned aerial vehicles (UAV) applications. This module concurrently uses GNSS signals from all four GNSS constellations (GPS, GLONASS, Galileo, and BeiDou) plus QZSS satellites. This multi-band GNSS receiver delivers centimeter-level accuracy in seconds by combining GNSS signals from multiple frequency bands (L1/L2/L5) and RTK technology. It has a tracking and reacquisition sensitivity of -167 dBm and -160 dBm respectively. The ZED-F9P is available in an SMT package that measures 17.0 x 22.0 x 2.4 mm. The ZED-F9P also includes moving base support, allowing both base and rover to move while computing a centimeter-level accurate position between them. The moving base is ideal for UAV applications where the UAV is programmed to follow its owner or to land on a moving platform. It is also well suited to attitude sens...Click here to view specs.

Fully Compliant Wi-Fi 6 SoC for WLAN Applications

The BCM6710 is a 3x3 Wi-Fi 6 system-on-a-chip (SoC) designed for WLAN applications including Wi-Fi routers, residential gateways, wireless range extenders, and set-top boxes. This SoC is fully compliant to IEEE and Wi-Fi Alliance (WFA) Wi-Fi 6 (802.11ax) requirements and supports three transmit and three receive streams in 2.4 GHz, 5 GHz and future 6 GHz bands. The device has integrated RF power amplifiers and uses multiuser technologies such as downlink and uplink OFDMA to deliver better throughput and reach to consumer devices in a home network. With the 6-GHz Wi-Fi capability, the chip paves the way for high-bandwidth, low-latency applications, such as 4K UHD video streaming, real-time immersive gaming, and augmented reality (AR). Click here to view specs.

Pick-off Tee from 5 kHz to 8 GHz

The PT-1080-30 from Werbel Microwave is an internally-matched Pick-off Tee that provides a flat response while operating from 5 kHz to 8 GHz. The Pick-off tee has a coupling value of 30 dB, an insertion loss of less than 1 dB, and can handle a CW input power of up to 20 W. It is available in a module with SMA female connectors and is ideal for Test & Measurement, Attenuators, Military Radio, Commercial Telecom, and Satcom applications. Click here to view specs.

2-Way SMT Power Divider from 10 to 1800 MHz

The MRFSP8725 from MiniRF is a 2-Way Power divider that operates from 10 to 1800 MHz. The power divider has an insertion loss of less than 1.2 dB and an isolation of 25 dB. It can handle 33 dBm of input power. This 75-ohm divider is available in a small surface-mount package and is ideal for broadband/ CATV, wireless, and other communication applications. These units are built Lead-Free and RoHS compliant. S-Parameters are available on request. Click here to view specs.

3.3 to 3.6 GHz Power Amplifier for 4G/5G-NR Small Cell Applications

The SKY66318-11 from Skyworks is a high-efficiency power amplifier (PA) that operates from 3.3 to 3.6 GHz. It provides a P1dB of 33 dBm with a gain of 36 dB and an efficiency of 20%. The PA offers a wide instantaneous bandwidth of 100 MHz and is fully input/output matched with high gain and efficiency. It operates from a single supply voltage of 5 V. This amplifier is available in a 16-pin 5 x 5 x 1.3 mm compact MCM package and is ideal for 4G LTE and 5G NR systems, small cells, and Macro/ Massive MIMO applications. Click here to view specs.

Coaxial Termination from DC to 18 GHz

The MMCT466 from Mesa Microwave is a Coaxial Termination that operates from DC to 18 GHz. This medium power termination can handle 150 watts of average input power and is available with an N-type connector. Click here to view specs.

SP6T Electro-Mechanical Switch from DC to 18 GHz

The RSM-6D-L-TTL-12-B from Renaissance Electronics is an electromechanical switch that operates from DC to 18 GHz. This SP6T switch has an insertion loss of less than 0.5 dB and an isolation of over 60 dB. It has a switching speed of under 20 ms. This latching switch has excellent repeatability and long-term reliability and is ideal for use in test & measurement applications. Click here to view specs.

Stand Alone RF Tunnel Shielded Box from 20 MHz to 6 GHz

The HDRF-3590 from RF Electronics is a Stand Alone RF Tunnel Shielded Box that operates from 20 MHz to 6 GHz. This fully portable design is equipped with caster wheels for ease of movement. The interior of this enclosure measures 650 mm (W) X 650 mm (H) X 2050 (L). It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. The box has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals. The HDRF-3590 has a number of user-friendly I/O connection options that include HDMI, RJ45, USB, DB9, VGA, DB25 and AC/DC. It is ideal for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing. Click here to view specs.

30 dB Low PIM Directional Coupler from 0.8 to 2.5 GHz

The LP715-30-1.650W from MECA is a low PIM directional coupler that operates from 0.8 to 2.5 GHz. It has a coupling value of 30 dB and can handle up to 500 Watts of power. The coupler has an insertion loss of less than 0.1 dB and directivity of more than 25 dB. It is available in a module with N-Type Female connectors and is ideal for applications where precise monitoring, external leveling, signal mixing or swept transmission and reflection measurements are desired. Click here to view specs.

6 dBi, 4-Port OMNI Antenna from 2.5 to 2.7 GHz

The POMNQX-2.7 from Radiowaves is a 4-port Omni-directional Antenna that operates from 2.5 to 2.7 GHz. It provides a gain of up to 6 dBi and has a 45-degree slant polarization. The antenna can handle up to 100 watts of power and has a port to port isolation of 23 dB. This Pseudo Omni-directional antenna is ideal for small cell deployments with a compact design allowing for installation in city-mandated enclosures and street furniture while meeting PIM, gain and isolation requirements. The antenna measures 2.33 ft. and is available with 4.310 female connectors. Click here to view specs.

2.4 - 2.5 GHz& 5.1 - 5.9 GHz Flat Panel, Multi MIMO Antenna

The PAT2450G13XP is a multi MIMO flat panel antenna that operates from 2.4 to 2.5 GHz and 5.1 to 5.9 GHz. This directional antenna delivers a gain of up to 14 dBi with port isolation of over 20 dB and front to back ratio of more than 30 dB. It is available in an IP67 rated outdoor weatherproof enclosure that measures 345 x 345 x 62 mm and is ideal for 2.4 GHz Wireless LAN, 5 GHz Wireless LAN, IEEE 802.11a/b/g/n and Point to Multipoint Applications. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (21 - 27 Nov, 2019)