Latest RF & Microwave Products of the Week (26 Dec 2019

DC to 8 GHz SMA Connectors for Harsh Weather Conditions

The series of ruggedized SMA connectors from Amphenol RF operates from DC to 8 GHz. These 50-ohm interconnects are available in straight and right-angle configurations and are ideal for extreme weather conditions. They have an IP67 rating and are constructed using nickel plating over brass with reliable threaded interface for outdoor installation. Click here to view specs.

70W GaN HEMT for Satellite Earth Stations

The MGFK48G3745A from Mitsubishi Electric is a Ku-band GaN High Electron Mobility Transistor (HEMT) designed for satellite earth station applications. It operates from 13.75 to 14.5 GHz and provides a saturated output power of 70 W with a gain of 11 dB. This transistor uses a matching circuit to deliver an industry-leading wide offset frequency, which is 80 times higher than that of current models...Click here to view specs.

Log Average Power Detector from 100 to 6000 MHz

The GRF1201 from Guerrilla RF is a logarithmic, average power detector that operates from 100 to 6000 MHz. The device is manufactured using Heterojunction Bipolar Transistor Technology (InGaP HBT) and has a Detector Slope of 0.08 volts per dB (from –20 to +20 dBm of RF input power). It requires a supply voltage (Vcc) range of 2.7 to 5 volts. Click here to view specs.

1000 W Termination form DC to 3 GHz

The WA1470 from Weinschel Associates is a Termination that operates from DC to 3 GHz. It can handle up to 1000 Watts of average power and 10 kW of peak power. This termination is matched to 50 ohms and has a VSWR of 1.35:1. It is available in a module that measures 387.00 (L) x 234.00 (W) x 267.00 (H) mm with N-Type or DIN 7/16, stainless steel M/F connectors. Click here to view specs.

Multilayer Bandpass Filter from 27.5 to 29.5 GHz

The MMCB2528G5T-0001A3 from TDK is a surface mount multilayer bandpass filter with a passband from 27.5 to 29.5 GHz. The filter has an insertion loss of less than 2.3 dB and 33 dB of rejection above and below the passband. This filter can handle a CW input power of up to 1 W. It is available in 2.5 x 2 x 0.90 mm surface-mount EIA package and is suitable for 5G applications. Click here to view specs.

17 GHz / 24 GHz Point-to-Point Microwave Link

The RAy3 from Racom is a high-speed point-to-point microwave link that operates at 17 GHz / 24 GHz and provides up to 1 Gbps in challenging conditions. This Full Outdoor Software Defined Radio with Linux OS, is designed for high-performance links with maximum reliability, exceptional system gain, and resistance to disturbances. It supports 2048 QAM (1 Gbps) and 4096 QAM (540 Mbps) with channel bandwidths up to 112 MHz. Click here to view specs.

Compact 90-Degree E-Plane Waveguide Bend from 60 to 90 GHz

The HBEB from HXI is a 90-degree E-Plane waveguide bend that operates from 60 to 90 GHz. It has an insertion loss of 0.25 dB and provides minimal discontinuity and a low VSWR. This compact E-band waveguide bend measures 0.85 x 0.85 x 0.75 inches and has a bend radius of 0.475 inches. Click here to view specs.

Low Power Module with Integrated LTE-M/NB-IoT Modem and GPS

The nRF9160 is a low power System-in-Package with integrated LTE-M/NB-IoT modem and GPS. The module has 1 MB of Flash plus 256 kB of RAM onboard memory with a broad range peripheral set, analog and digital interfaces, 32 GPIOs, a stand-alone modem with full LTE capability, plus a multiband RF front-end. It incorporates Arm’s latest Arm Cortex M-33 CPU core, Arm TrustZone and Arm CryptoCell security for Internet-level encryption and application protection. Click here to view specs.

UHF RFID Tag for Surgical Instruments

The LXTBKZMCMG-010 from Murata is a small RFID tag for surgical instruments that can be used on metal surfaces. Operating from 865 to 928 MHz, this Impinj Monza R6P IC-based RFID tag complies with ISO18000-63 and EPC Global Gen2v2 specifications. It has an EPC memory of 128 bits and user memory of 32 bits. The Tag IC measures 6 x 2 x 2.3 mm and has a read range of up to 150 cm on metal. Click here to view specs.

RAIN RFID Tag chip for High-Speed Inventory Counting

The IPJ-M730A-A00 from Impinj is an ISO/IEC 18000-63 and EPC Global Gen2X2 compliant RAIN RFID Tag chip with 128 bits of EPC nonvolatile (NVM) memory. It provides a read sensitivity of -24 dBm and a write sensitivity of -21 dBm with a dipole antenna. This RFID tag chip is a part of Impinj 700 series of performance endpoint ICs. It also contains an extended non-changeable TID consisting of a 16-bit header and 48-bit serialization. Click here to view specs.

Flanged Termination from DC to 7 GHz

The 7ANT300-25 from API Technologies is a Flanged Termination that operates from DC to 7 GHz. It can handle up to 25 Watts of average power and can operate at a wide temperature range from -55 to 150 Degrees Celsius. This termination is matched to 50 ohms and has a VSWR of less than 1.35:1. Click here to view specs.

20 to 800 MHz Extended Temperature VCXO

The VX-505 from Microsemi is an Extended Temperature Voltage Controlled Crystal Oscillator with an oscillation frequency from 20 to 800 MHz. It provides a phase noise floor as low as -166 dBc/Hz across an extended temperature range from -55°C to 125°C. The VCXO is available in a surface mount FR4-based package and is ideal for communications, industrial, harsh environments and military applications. Click here to view specs.

4.3-10 Low PIM 1700/2100 MHz Duplexer

The ADRF-2PLX-2100-4310 from ADRF is a Duplexer with a passband from 1710 to 1755 MHz (Band 1) and 2110 to 2155 MHz (Band 2). The Duplexer has an insertion loss of less than 1.5 dB and an isolation of over 80 dB. It can handle up to 100 watts of power and is available in a connectorized module that measures 6.39 x 2.99 x 1.77 inches with 4.3-10 female connectors. Click here to view specs.

Cavity Notch Filter for GNSS Bands

The 22R7-1580.5-X80S11 from Reactel is a Cavity Notch Filter that eliminates GPS, GLONASS, COMPASS and BeiDou signals simultaneously while allowing a passband up to 3000 MHz. It has passbands from DC to 1540 & 1620 to 3000 MHz. This highly selective cavity notch filter has an insertion loss of less than 5 dB and provides an attenuation of more than 70 dB. It is available in a module that measures 2.5 (H) x 3.0 (W) x 11.4 (L) inches with SMA female connectors. Click here to view specs.

Tunable BandPass Filter from 174 to 225 MHz

The Model 5674 from Netcom is a Tunable Filter that operates from 174 to 225 MHz with a 6.5% bandwidth. The filter has a low insertion loss of 4.7 dB and can handle an input power of up to 28 dBm. It can be controlled using a serial input control interface and has a tuning speed of less than 35 µs. The filter is available in a surface-mount package that measures 0.575 x 0.575 x 0.350 inches. Click here to view specs.

9-in-1 Vehicle Mount Antenna for 4G/5G Cellular, Wi-Fi & GNSS Applications

The MA1509.LBIVWCGHM.001 from Taoglas is a 9-in-1 permanent mount antenna that includes 4 x 5G/4G Cellular MIMO Antennas, 4 x Wi-Fi 2.4/5GHz MIMO Antennas and 1 x GPS/GLONASS/BeiDou Antenna. The antenna module delivers powerful MIMO antenna technology for 5G/LTE, Wi-Fi 2.4/5 GHz 802.11n and the emerging 802.11ac standard. It also has an optimized GPS/GLONASS/BeiDou patch antenna for positioning applications. Click here to view specs.

5G Sub-6 GHz Module for M2M and IoT Applications

The RG500Q from Quectel is a 5G Sub-6 GHz module, compliant with 3GPP Release 15 specifications and capable of both 5G standalone (SA) and non-standalone (NSA) modes of operation. This module supports LTE Category 12 or above and has embedded GNSS capabilities. It has been developed for the Asia-Pacific region as well as Europe, the Middle East, and North America. Click here to view specs.

High Accuracy GNSS Receiver with Dead Reckoning

The MC-1612-DG from LOCOSYS is a single-band multi-constellation GNSS receiver that supports GPS, GLONASS, GALILEO, BEIDOU, QZSS and SBAS. Equipped with an ARM processor, this device also has a flash memory, TCXO, RTC crystal, LNA and SAW filter, and embedded MEMS sensors (6-axis accelerometers gyros), 1-hole pressure (option) Micro-Electro-Mechanical Systems (MEMS) sensor, equipped with dead reckoning software. Click here to view specs.

2.3 to 2.4 GHz Power Amplifier Module for LTE and 5G Applications

The AFSC5G23D37 from NXP is a fully integrated Doherty power amplifier module that operates from 2300 to 2400 MHz. It provides an output power of 5 watts with a gain of 27 dB while operating from a 26 V DC supply. The amplifier is available in a 10 x 6 mm surface-mount package and is ideal for wireless infrastructure applications including massive MIMO systems, outdoor small cells, and low power remote radio heads. This field-proven LDMOS power amplifier is designed for TDD and FDD LTE systems. Click here to view specs.

Directional MIMO Antenna for Stadiums from 617 MHz to 6 GHz

The Symphony-SP is a directional MIMO antenna solution for sub-6 GHz 5G sector coverage in stadiums and high capacity venues. It provides broadband MIMO coverage from 617 MHz to 6 GHz, with coverage of all key licensed and unlicensed bands – including GSM, LTE, 5G, CBRS, WiFi, C-Band, and LAA. This antenna delivers a gain of up to 13.5 dBi and can handle an input power of 25 Watts per port. Click here to view specs.

Quad-Channel RF Transceiver for 3G/4G/5G Basestation Applications

The ADRV9026 is a highly integrated, Quad Channel RF agile transceiver that operates from 650 to 6000 MHz and supports up to 200 MHz bandwidth. It has four independently controlled transmitters, dedicated observation receiver inputs for monitoring each transmitter channel, four independently controlled receivers, integrated synthesizers, and digital signal processing functions providing a complete transceiver solution. Click here to view specs.

Tunable Notch Filter from 450 to 2700 MHz & 600 to 6000 MHz

The Ranatec RI 266 is a digitally tunable notch filter covering all sub-5 GHz mobile bands and channel bandwidth in one box. Narrow bands (1.4, 3 and 5 MHz bandwidth channels) are defined from 450 to 2700 MHz, and broad bands (10, 15, 20, 25, 30, 40, 50, 60, 80 and 100 MHz bandwidth channels) are defined from 600 to 5000 MHz. In addition, there are 3GPP V2X channels of 10 and 20 MHz bandwidth from 5150 to 5925 MHz. Click here to view specs.

WR12 to 1.0 mm Waveguide to Coax Adapter

The VT740WECA1.0 from Vector Telecom is a Waveguide to Coaxial Adapter with a WR12 waveguide interface and a1mm connector interface. It operates from 60 to 90 GHz with an insertion loss of less than 0.5 dB and has a VSWR of up to 1.5:1. The adapter is manufactured using Aluminum, Copper with a Gold-plated finish and measures 10 x 19.1 x 19.1 mm. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (26 Dec 2019 - 1 Jan 2020)