Latest RF & Microwave Products of the Week (30 May

9 kHz to 26.5 GHz Handheld Analyzers for 5G and EW Testing

The FieldFox B-series from Keysight are multi-purpose, handheld microwave analyzers that provide precise measurements from 9 kHz to 26.5 GHz. They deliver measurement precision and bandwidth up to 100 MHz for wide-band, real-time spectrum analysis to enable 5G testing in the field. Click here to learn more.

100 Watt SPDT Switch from 0.3 to 3.8 GHz

The SKY12245-492LF from Skyworks is a compact, high-power SPDT switch that operates from 0.3 to 3.8 GHz with a driver circuit for TD-LTE applications. It has an insertion loss of 0.2 dB and an isolation of 45 dB. The switch can handle up to 100 watts (38 dBm) of power. It requires 5 V of supply voltage and has a control voltage of 0/3 V. The switch can be tuned to specific RF bands within the range of 0.3 to 3.8 GHz by modifying external SMT components. The SKY12245-492LF is available in a small 20-pin Quad Flat No-Lead package that measures 5 x 5 mm. It can be used in TDD 2G/3G/4G LTE systems, High-power switch for micro-cell and macro-cell base stations and Active antenna array applications. Click here to view specs.

DC to 20 GHz Voltage Variable Attenuator

The CMD285C3 is a GaAs MMIC absorptive Voltage Variable Attenuator (VVA) that operates from DC to 20 GHz. The VVA uses two analog control voltages varied between -5V and 0V to control the RF signal levels over an attenuation range of 35 dB. It has a low insertion loss of 3.2 dB at 10 GHz and is matched to 50 ohms, eliminating the need for RF port matching. The CMD285C3 is available in a 3 x 3 mm leadless surface mount package and is ideally suited for military, space and communications systems. Click here to view specs.

Low-Cost Vector Network Analyzers from 1 MHz to 8/20/43.5 GHz

The ShockLine MS46322B series from Anritsu has three economy Vector Network Analyzers that operate from 1 MHz to 8/20/43.5 GHz. These 2-port VNAs are available in a self-contained, compact, and rugged 2U chassis that includes the power supply and computer. The series is based on Anritsu’s patented shockline VNA-on-chip technology, which simplifies the internal VNA architecture at high frequencies, reduces instrument cost, and enhances accuracy and measurement repeatability. The entire series has a sweep speed of 130 microseconds per point and a dynamic range of better than 100 dB, making it suitable for testing devices like millimeter-wave (mm-Wave) antennas and other passive 5G components in engineering, manufacturing, and cost-sensitive education applications. The VNAs integrate easily into rack-mount test systems due to their small size and remote programmability. They support SCPI command programming and software drivers for the most common programming environments. The ...Click here to view specs.

High Performance Analog Signal Generator up to 20 GHz

The R&S SMA100B from Rohde & Schwarz is a powerful analog signal generator with a frequency range up to 20 GHz. It can generate signals with the a very low phase noise and low harmonics while delivering a high output power. The device can provide high-level signals with extremely low, close-in phase noise of less than -152 dBc at 1 GHz and less than -132 dBc at 10 GHz, each at 20 kHz offset. The 6 GHz instrument generates up to 38 dBm RF output power, and the 20 GHz instrument generates up to 32 dBm. Non-harmonics are below -110 dBc at an output signal of 1 GHz. It is the only analog signal generator that can simultaneously provide a second, independently configurable, extremely pure and synchronized clock signal up to a frequency of 6 GHz. This signal generator has a powerful pulse modulator and generates pulses with extremely short rise and fall times and an on/off ratio of below 90 dB. It can handle the most demanding component, module and system T&M tasks in th...Click here to view specs.

10 Gbps E-band Transceiver for 5G Applications

The Morpheus from Filtronic is a high-performance E-Band Transceiver with fully integrated 71-76 GHz and 81-86 GHz modules. It has been developed as a turn-key solution for ultra-high capacity data links - supports 10 Gbps and fronthaul for C-RAN (Centralized Radio Access networks). Each module contains all the transmit and receive functions necessary for the RF section of an E-band link and provides a simple connection to a high data rate full duplex modem. The Morpheus supports 256 QAM modulation and has up to 2 GHz baseband bandwidth. It has been developed for outdoor placement. Click here to view specs.

36 to 42 GHz Cavity Band Pass Filter

The AE39000B11561 from Anatech Electronics is a Cavity Band Pass Filter with a passband from 36 to 42 GHz. The filter has an insertion loss of under 1.5 dB and more than 45 dB of rejection above and below the passband. It can handle up to 5 watts of power and is available in a module that measures 40 x 16 x 11 mm with 2.92 mm female connectors. Click here to view specs.

SP16T Switch from 0.1 to 52 GHz

The P16T-100M52G-100-T-DEC from Planar Monolithics is an SP16T absorptive switch from 0.1 to 52 GHz. It has an insertion loss of 18 dB and an isolation of 70 dB. The switch has a switching time of 100 ns and can handle up to 20 dBm of power. It requires -12 to +5 volts of supply voltage with TTL control and has a VSWR of 3.5:1. The switch is available in a module that measures 8.0 x 3.0 x 0.65 inches with 2.4 mm female connectors. Click here to view specs.

8 kW Pulsed power Amplifier from 2.9 to 3.5 GHz

The 2214 is a Solid State Broadband High Power Amplifier that operates from 2.9 to 3.5 GHz. This amplifier consists of multi-drawer integrated subsystems that produce more than 8kW of peak pulsed output power with a gain of 70 dB. The amplifier subsystem features multiple high power GaN devices that provide wide frequency response, high gain, high peak power capability, and low distortions. The amplifier system includes a built-in control and monitoring system, with protection functions which preserve maximum output capability and reliability. Remote management and diagnostics are via an embedded web server allow the device to be controlled simply by connecting the unit’s Ethernet port to a LAN. The system required a 180-260VAC three-phase AC source. Click here to view specs.

50 W Solid State Power Amplifier from 1 to 6 GHz

The 50HM1G6AB-47 from AR RF/Microwave Instrumentation is a compact hybrid power amplifier module that operates from 1 to 6 GHz. When used with a sweep generator, it provides an output power of more than 40 watts with a gain of 48 dB and excellent flatness, noise figure, and low intermodulation distortion. This power amplifier can be used for both military and commercial applications. The 50HM1G6AB-47operates from a single DC voltage (22V to 28V) and shuts off if the voltage exceeds 29V. The amplifier is available in a module that measures 28 x 21 x 2.54 cm with SMA female connectors. It can be bolted to a heat sink for good heat dissipation and requires a proper cooling fan to keep case temperature below 60°C. If the case temperature exceeds 80°C, there will be a thermal shutdown to protect the module. Click here to view specs.

100 kHz to 50 GHz Wideband Distributed Amplifier

The MAAM-011238 is a wideband amplifier that operates from 100 kHz to 50 GHz. The amplifier provides gain of 14 dB with a noise figure of 5 dB and 18.5 dBm of P3dB output power at 30 GHz. It requires a positive bias voltage and can be operated with a 6 V supply while consuming 135 mA of current. This amplifier is available in a 5 x 5 mm SMT package and is suitable for a wide range of applications in instrumentation and communication systems. It is also available as a bare die - MAAM-011238-DIE. Due to its wide bandwidth, this amplifier can be used for both Sub-6 GHz and mm-Wave 5G Applications. Click here to view specs.

10 Watt GaN Amplifier MMIC from 37 to 43 GHz

The CGY2651UH/C1 from OMMIC is a GaN Power Amplifier that operates from 37 to 43 GHz in the K-Band. This GaN MMIC amplifier provides an output power of 40 dBm with a 30% PAE @ its saturated output power. This amplifier requires a 12 V supply and is ideal for Radar, Telecommunication and Space applications. It is also well positioned for 5G Applications in the 39 GHz Band. Click here to view specs.

10 W GaN Power Amplifier from 32 to 38 GHz

The TGA2222 is an MMIC GaN power amplifier that operates from 32 to 38 GHz. This amplifier provides more than 10 watts of saturated power with a power gain of over 16 dB and PAE of 22%. It has DC blocking capacitors on both RF ports, which are matched to 50 ohms. The amplifier is available as a die that measures 3.43 x 2.65 x 0.05 mm and is ideal for both commercial and military applications like radar, satcom, EW and space communications. Click here to view specs.

SPDT Switch from DC to 60 GHz

The InP1012 from Teledyne is a monolithic, reflective SPDT active RF switch that operates from DC to 60 GHz. It has an insertion loss of 3.7 dB, a return loss of 26 dB and provides an isolation of 69 dB. The switch has a switching time of less than 100 ns and can handle up to 21.8 dBm of power. This switch is manufactured using aInP-HEMT process and is available in a RoHS compliant surface mount package that measures 3 x 3 x 1 mm with K-type test board connectors. It is suitable for test and measurement, microwave communication, and radar applications. The switch can also tolerate up to 100 krads of radiation, allowing it to be used in space applications. Click here to view specs.

0 to 60 dB Programmable Attenuator from DC to 40 GHz

The STA-0004036010-2F2F-P7 from SAGE Millimeter is a coaxial programmable attenuator that operates from DC to 40 GHz. It has an attenuation range from 0 to 60 dB with 10 dB steps. The attenuation bias and control are via a 10 pin (2x5) 0.1" pin spacing shrouded male connector to accommodate remote operations. It has an insertion loss of less than 3.5 dB and can handle up to 1 W of input power while operating from a 24 volts supply. The attenuator is available in a module with 2.4 mm female connectors and ideal for test lab, instrumentation, and auto test set applications. A 9” female to female cable with 10 pin connectors is included for interface convenience. Click here to view specs.

Low PIM Cable Assemblies for LTE, 4G and 5G Systems

The SRX Series of Cable Assemblies have been developed to address the low PIM requirements of cellular base station and in-building system designers who are working on LTE 4G and 5G systems. This series includes cabinet integration, short cable runs or jumper applications, long-haul cable runs, indoor use, outdoor use, riser, and plenum environments. Interconnect options include SMA, N, 7/16, TNC and mini-DIN (4.1/9.5) connectors. Click here to view specs.

Very Low Loss FR-4 Process Compatible Laminate for mm-Wave Frequencies

The Astra MT77 laminate materials from Isola have been designed for commercial RF/microwave printed circuit designs. They feature a dielectric constant (Dk) that is stable between -40°C and +140°C at up to W-band frequencies. Test data in the datasheet has been provided up to 20 GHz. Astra MT77 offers an ultra-low dissipation factor (Df) of 0.0017, making it a cost-effective alternative to PTFE and other commercial microwave laminate materials. The laminates can be used for a wide range of applications including long antennas and radar applications for automobiles, such as adaptive cruise control, pre-crash, blind spot detection, lane departure warning and stop and go systems. Click here to view specs.

3.3 Dk Low Loss, Spread Glass Reinforced Laminates

The RO4835T laminates from Rogers Corporation are 3.3 Dk, low loss, spread glass reinforced, ceramic filled thermoset materials designed for inner-layer use in multilayer board designs. These laminates have excellent Dk tolerance, and a tight thickness control for outstanding, repeatable wireless performance. They are available in a 2.5 mil, 3 mil and 4 mil core thickness and can be fabricated using standard epoxy/glass (FR-4) processes. RO4835T laminates have the UL 94 V-0 flame retardant rating, and are compatible with lead-free processes. They are ideal for power amplifiers, phased-array radar, cellular infrastructure and test & measurement applications. Click here to view specs.

Low Cost, Real Time Spectrum Analyzer from 100 kHz to 20 GHz

The SM200B from Signal Hound is a high-performance RF spectrum analyzer and monitoring receiver that operates from 100 kHz to 20 GHz. The analyzer has 160 MHz instantaneous bandwidth (IBW) calibrated I/Q capture, available through block transfer of a 2-second I/Q buffer over USB 3.0 to the PC. This added 2-seconds of segmented I/Q capture memory, with advanced triggering options such as frequency mask triggering (FMT) plus user-specified pre and post-trigger, satisfies the ever-increasing analysis bandwidth demands of the wireless industry. This allows the device to be used for 5G, and radar applications. The SM200B has a dynamic range of 110 dB, 1THz/sec sweep speed at 30 kHz RBW (using Nuttall windowing), and phase noise performance that is low enough to contribute less than 0.1% error to EVM measurements and rival even the most expensive spectrum analyzers on the market. This real time spectrum analyzer can be controlled by any computer via USB. Signal Hound provides a sof...Click here to view specs.

DC to 24 GHz GaAs MMIC pHEMT Self-Biased Distributed Power Amplifier

The MMA052PP45 is a GaAs MMIC pHEMT distributed self-biased amplifier that operates from DC to 24 GHz. The amplifier provides a gain of 14 dB with a noise figure of 3.5 dB and an output IP3 of 35 dBm at 10 GHz. It operates over a 10 V supply while drawing 235 mA of current. It is available in a 4.5 x 4.5 mm plastic QFN package and is ideal for test instrumentation, wideband military and space applications. Click here to view specs.

10 MHz Ultra Low Phase Noise OCXO

The O-CEX-XSXXYY-X-E-X-10.000 MHz from NEL Frequency Controls is an OCXO that operates at 10 MHz. It provides an extremely low phase noise of -148 dBc/Hz at a 10 kHz offset with a 14 dBm sine-wave output. The OCXO requires a 5/12 V supply and has low G-sensitivity of 0.1 ppb/G. It is available in a 36 x 27 mm surface mount package and is ideal for radar, GPS, Instrumentation and telecommunication system applications. Click here to view specs.

Ultra-Low Jitter VCSO from 800 MHz to 3.2 GHz

The VS-800 from Vectron is a Voltage Controlled SAW Oscillator (VCSO) that provides output frequencies from 800 MHz to 3.2 GHz. It has an internal multiplier circuit deployed for output frequencies above 1.6 GHz. The VCSO is capable of achieving 6fs-RMS jitter performance over the offset bandwidth of 12 kHz to 20 MHz. This product is available in a hermetically sealed leadless surface mount package that measures 5.0 x 3.2 x 1.8 mm. It is ideal for emerging Optical Transport Networks, high-speed converters, wireless communication and DOCSIS applications. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (30 May - 5 june, 2019)