Latest RF & Microwave Products of the Week (4

DC to 8.5 GHz /10 to 26 GHz Diplexer

The WDNX9+6-DC-8500/10000-26000-40 from Wainwright Instruments is a diplexer with a low passband from DC to 8.5 GHz and a high passband from 10 to 26 GHz. It has an insertion loss of under 1.5 dB, an attenuation of more than 40 dB, and a return loss of over 12 dB. The Diplexer can handle up to 5 watts of power and is available in a module that measures 31 x 18 x 10 mm (plus flanges and connectors). Click here to view specs.

GaAs MMIC Double Balanced Mixer from 18 to 32 GHz

The SAC3513 is a double-balanced mixer from SuperApex Corporation with an RF/LO frequency from 18 to 32 GHz and an IF frequency from DC to 10 GHz. This GaAs MMIC mixer can be used as both an up-converter and down-converter. It has a low conversion loss of 7.5 dB and high LO to RF isolation of 40 dB. The SAC3513 is available in a 0.58 x 0.9 x 0.1 mm package and is ideal for telecommunication, radar, Satcom, optical communication, military, and aerospace applications. The chip is available with full passivation for increased reliability and moisture protection. Click here to view specs.

6 to 18 GHz USB Programmable Signal Generator

The LMS-183DX from Vaunix is a USB Programmable Signal Generator that operates from 6 to 18 GHz with a resolution of 100 Hz and switching time of 100 microseconds. The signal generator provides calibrated power control from -70 dBm to 10 dBm (80 dB dynamic range) in 0.5 dB steps. This device has a phase noise of better than -140 dBc/Hz at 6 GHz, spurious lower than -70 dBc and harmonics less than -40 dBc. The signal generator is powered and controlled by a USB connection to a PC or self-powered hub, and can be programmed from a graphical user interface (GUI) software, or SDK provided by Vaunix. It is easily programmable for fixed frequency operation, unidirectional or bidirectional frequency sweep and pulse modulation directly from the included Graphical User Interface (GUI). This device is available in a compact module that measures 4.90 x 3.14 x 1.59 inches with SMA female connectors and is ideal for Automated Test Equipment (ATE), Engineering/Production Test Labs and radar rece...Click here to view specs.

50 kHz to 6 GHz Radio over Fiber Optic Transceiver

The VLI0000919AA from VectraWave is a Radio over Fiber Optic Transceiver module that operates from 50 kHz to 6 GHz. This transceiver consists of two modules - ROSA (VLI 0000920 AA) receiver module and TOSA (VLI 0000921 AA) transmitter module. The transmitter module unit contains a DFB laser and Automatic Optical Power Control. The transmitter provides an output power of up to 3.2 mW. This transceiver is ideal for antenna remoting, local oscillator remoting and communication links applications. Click here to view specs.

3.1 to 3.5 GHz GaN HEMT for S-Band Radar Power Amplifiers

The CGHV35120F from Wolfspeed is a GaN HEMT that operates from 3.1 to 3.5 GHz. It provides an output power of 120 W and a gain of 13 dB while operating from a 50 V supply voltage. The device is available in a ceramic/metal flange package and is ideal for S-band radar amplifier applications. Click here to view specs.

20 dB Dual Directional Coupler from 1 to 4 GHz

The 501004020 from KRYTAR is a dual directional coupler that operates from 1 to 4 GHz. The 20 dB coupler has a directivity of more than 20 dB and an insertion loss of less than 0.7 dB. It can handle up to 20 W of input power and peak power of up to 3 kW. This coupler is available in a module with SMA female connectors and can be used in SATCOM, Commercial, and Radar applications. Click here to view specs.

10 W Low PIM Termination from 0.380 to 6 GHz

The LPT10-NM-M01 from MECA is a Low PIM Termination that operates from 0.380 to 6 GHz. This N-type Male termination can handle up to 10 watts of power and has a VSWR of less than 1.25:1. The termination has a low PIM of -170 dBc and can operate from -55 to 85 degrees C. Click here to view specs.

16 dBm Low Noise Amplifier from 0.25 to 8.5 GHz

The PE210R258R515SFFLM Rev. B from Planar Monolithics is a low noise amplifier that operates from 0.25 to 8.5 GHz. It provides more than 16 dBm of output power, a gain of 9 to 13 dB, and a noise figure of less than 4.5 dB. This amplifier can handle up to 10 dBm of input power and requires a 12-volt power supply. It is available in a module with SMA (F) connectors. Click here to view specs.

25 dBm E-band Power Amplifier from 78 to 87 GHz

The SBP-7838733025-1212-E1 from SAGE Millimeter is an E-band power amplifier that operates from 78 to 87 GHz. It provides 25 dBm of output power, a gain of 30 dB, and an I/O return loss of 10 dB each. This amplifier requires 8 volts of power supply and is available in a module that measures 1.10 x 1.50 x 0.75 inches with WR-12 waveguides and UG-387/U anti-cocking flanges. It can be used in a wide range of applications like Radar Systems, Communication Systems, and Test & Measurement. Click here to view specs.

50 W X-Band GaN Block Up Converter

The ALTX-798447G-60-16 from Alga is an X-band GaN Block Up Converter that provides an output power of 50 watts. It upconverts an input frequency from 950 to 1450 MHz to an output frequency from 7.9 to 8.4 GHz. This BUC delivers a gain of more than 60 dB. It is available in a module that measures 190 x 120 x 114 mm with N-type female connectors at the input interface and WR112G waveguide at the output interface. The ALTX-798447G-60-16 is built for VSAT stabilized platforms and mobile stations, while also offering benefits for the fixed site and offshore applications. It weighs less than 7.5l bs, making it ideal for feed mounting. The BUC has integrated Telemetry for critical parameters such as RF power detection, mute control, over temperature shutdown and summary alarm. Click here to view specs.

Wireless LAN 802.11b/g/n SiP Module for Embedded Platforms

The HDG205 is a Wireless LAN 802.11b/g/n System-in-Package (SiP) module with ultra-low power consumption, optimized for embedded devices. It supports data rates up to 72 Mbps and provides a transmit power of 17 dBm. This FCC, IC and CE complaint module measures 8 x 8 mm and is ideal for applications like wireless sensors for industrial and home control, remote device management such as location tracking, Portable Media devices, IP-radio, home security, wireless speakers and IP audio devices. It supports multiple SW features including 802.11e and 802.11i (Security, Quality of Service). Click here to view specs.

8 to 12 GHz Cryogenic Isolator

The LNF-ISC8_12A from Low Noise Factory is an ultra-low insertion loss cryogenic isolator that operates from 8 to 12 GHz. It provides isolation of 20 dB and insertion loss of 0.2 dB. The isolator has been designed to meet the strict requirements of ultra-low temperature physics research. The isolator is available as a slim coaxial module that measures 19.1 x 20.6 x 10.2 mm with SMA connectors. Click here to view specs.

50 W Class AB Amplifier from 0.6 to 6 GHz

The 2222 from Empower RF is a solid state broadband Class AB high power amplifier that operates from 0.6 to 6 GHz with built-in control, monitoring and protection functions. It provides more than 50 W of output power with a gain of over 50 dB and a return loss of less than 10 dB. This amplifier utilizes high power GaN devices that provide a wide frequency response, high gain, high peak power capability, and low distortions. It is available in a module that measures 17 x 5.25 x 22 Inches with N-type (F) connectors and is suitable for CW, AM, FM, pulse, and linear applications. The 2222 requires a 24 to 32 V power supply and consumes 800 W of power. Click here to view specs.

0 to 10 dB Fixed Attenuators from DC to 20 GHz

The TT9 Series from Smiths Interconnect are Q-band wide-band fixed chip attenuators that operate from DC to 20 GHz. They are available in attenuation values from 0 to 10 dB in 1 dB steps and can handle 500 mW of input power. These attenuators have a VSWR of 1.40:1 and are available in a surface-mount package that measures 1.78 X 1.62 mm. They are specifically designed for surface mount broadband applications which require more power and are ideal for Mobile Networks, Broadcast, High Power Amplifiers, Isolators/Circulators, Military, and Instrumentation applications. Click here to view specs.

2-Way UHF Power Combiner from 470 to 860 MHz

The 9A2NAJfrom Renaissance Electronics is a 2-way UHF high power combiner that operates from 470 to 860 MHz. It has an insertion loss of 0.6 dB, isolation of more than 15.5 dB and can handle an input power of up to 330 watts/channel. The combiner has a typical input VSWR of 1.30:1, an amplitude balance of 0.1 dB and a phase balance of 2 degrees. It is available in a module that measures 6.5 x 4.9 x 1.43 inches and is used in applications like communication systems, instrumentation, and military mobile devices. Click here to view specs.

PXI Based Synthesized Signal Source from 100 MHz to 20 GHz

The SC5510A from SignalCore is a PXI based high-performance synthesized signal source that can generate signals from 100 MHz to 20 GHz. It has a low phase noise output of -115 dBc/Hz at 10kHz offset from a 10 GHz carrier, a 1 Hz tuning resolution, and an amplitude step resolution of 0.01 dB over a -30 dBm to +10 dBm output range. The use of a unique multiple phase-locked loop architecture, phase spurs are kept below -65 dBc across the entire tuning range, even at 1 Hz step resolution. This signal source has an additional, independent additional RF channel with a tunable frequency range from 100 MHz to 3 GHz and a tuning resolution of 25 MHz. This extra channel makes the module suitable for either single-stage RF conversion systems or dual-stage image suppression up/down converter systems. It is available in a module that measures 0.8 x 5.1 x 7.2 and has a 3 year warranty. This signal source is ideal choice as an integrated clock source for fast DAC and ADC applications, espec...Click here to view specs.

Hermetically Sealed High-Speed SPST Switch from 1 to 18 GHz

The E9114H from Kratos is a hermetically sealed, high speed SPST PIN diode switch with an integrated driver that operates from 1 to 18 GHz. It provides an insertion loss of under 2.5 dB and an isolation of over 60 dB. This switch can handle up to 200 mW of CW or peak input power and has rise/fall times of 10 nsec. The switch is available in a connectorized module with SMA male connectors and can be used as a drop-in module. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (4 - 10 July, 2019)