Latest RF & Microwave Products of the Week (7

4 kHz to 40 GHz Multi-Touch Power Meter Supports Four USB Sensors

The PMX40 from Boonton is an RF Power Meter that operates from 4 kHz to 40 GHz. Its intuitive, multi-touch display enables fast configuration of up to four USB sensors as well as easy access to measurement and analysis tools, providing a standalone solution for capturing, displaying, and analyzing peak and average RF power in both the time and statistical domains. The meter also incorporates a test source to verify sensor operation. The power meter has a video bandwidth of 195 MHz and a rise time 3 ns. It can perform up to 100,000 power measurements per second with a time resolution of 100 ps. This instrument comes with an automated pulse measurement feature and enables packet power measurements to be performed independently on multiple synchronous or asynchronous transmit chains with a common time base shared among sensors. This device is suitable for Wi-Fi and wireless communication signal analysis, including the troubleshooting of Secondary Surveillance Radar (SSR). The PMX40&...Click here to view specs.

Low-Cost Bluetooth Low Energy Module for IoT Applications

The SmartBond TINY DA14531 from Dialog Semiconductor is a Bluetooth Low Energy Module with an integrated antenna. Based on a Bluetooth 5.1 SoC, this module is optimized to significantly reduce the cost of adding BLE functionality to an IoT system. Its easy-to-use design and software allow developers to quickly and intuitively develop highly functional connected devices, targeting the next generation of the connected consumer, connected medical, smart home, and smart appliance applications. The module delivers 2.2 dBm of output power and has a sensitivity of -93 dBm It requires supply from 1.8 to 3.3V. The DA14531 integrates a 4-channel 10-bit ADC, an ARM Cortex-M0+ microcontroller with 48 KB of RAM, 1 MB FLASH, and a One-Time Programmable (OTP) memory of 32 kB. This DA14531 module incorporates two unique software features to eliminate the complexity of BLE development. The first is the configurable Dialog Serial Port Service (DSPS) software, which emulates a universal asynchro...Click here to view specs.

Multi-Band LTE CAT 1 Module for Europe and China

The A7670X from SIMCom is a Multi-Band LTE-FDD/ LTE-TDD/GSM/ GPRS/ EDGE Module which supports LTE CAT1 in Europe and China. It is designed for applications that need high throughput data communication in a variety of radio propagation conditions. The module has uplink data rates of up to 5 Mbps and downlink data rates of up to 10 Mbps. This module requires a supply voltage of 3.4 to 4.2 V. It has a strong extension capability with rich interfaces including UART, USB2.0, GPIO, ADC, 12C, etc. This SMT module is available in an LGA package that measures 24 x 24 mm and is compatible with SIMCom’s SIM7070 Series modules. This module is available with CCC, CA, and CTA approvals. Click here to view specs.

5.9 W GaN Power Amplifier from DC to 6 GHz

The CMPA0060002F1 from Wolfspeed is GaN Broadband Power Amplifier that operates from DC to 6 GHz. It delivers up to 5.9 W of saturated output power with a gain of 12.5 dB and PAE of 39%. The amplifier is available in a flange package that measures 0.5 x 0.5 inches and is suitable for Ultra-broadband amplifiers, fiber drivers, test instrumentation, and EMC amplifier driver applications. This MMIC amplifier employs a distributed (traveling-wave) amplifier design approach, enabling extremely wide bandwidths to be achieved in a small footprint screw-down package featuring a copper-tungsten heat sink. Click here to view specs.

250 W LDMOS Power Transistor from 2400 to 2500 MHz

The BLP2425M10S250P from Ampleon is an LDMOS Power Transistor that operates from 2400 to 2500 MHz. It provides a P1dB of 250 watts with a power gain of over 13 dB and a drain efficiency of 64%. The transistor requires a 32 V power supply and has been designed for use in RF power amplifiers that operate in the 2.4 GHz ISM Band. It is available in a low cost thermally enhanced plastic package with integrated ESD protection. Click here to view specs.

250 W GaN Power Amplifier for X-band Applications

The SGN-X3-200 from KRATOS General Microwave is a GaN Power Amplifier that operates in the X-band with 9% bandwidth. It delivers peak saturated output power of more than 250W with a large signal gain of 55 dB and an efficiency of 20%. This solid-state amplifier has a pulse width of 256 µs, a rise/ fall time of 50ns, and a duty cycle of 15%. The SSPA consists of an input section with preamplifier stages and a power amplifier output section. The output section consists of a summation of 6 amplifiers. In addition to the microwave section, there is a proprietary designed asynchronous low-noise power supply and pulse-modulator. The airborne SGN-X3-200 is available in a module that measures 9.0 x 7.0 x 1.6 inches with SMA (F) connector at the input and WR90 waveguide at the output. It is suitable for radar, data links, communications, and test system applications. This high-reliability amplifier consumes 280 W of power and has reverse voltage protection. Click here to view specs.

2.2 kW Solid State GaN Power Amplifier from 1 to 2.5 GHz

The AMP2041-1 is a solid state GaN power amplifier from Exodus that operates from 1 to 2.5 GHz. It provides an output power of more than 2.2 KW with a gain of over 63 dB. The amplifier has ultra-wide instantaneous bandwidth and is suitable for linear CW and composite signal modulation standards & applications. It is available in a 32U rack cabinet with N-type female connectors. This power amplifier is ideal for EMI/RFI, lab, and general communication applications. The PA has built-in protection circuits, forward & reflected RF sample ports. It comes with 3 years manufacturer warranty for all parts and labor. Click here to view specs.

4G LTE/3G/2G Ultra Wideband Antenna

The 2JW0124z-C868B from 2J Antennas is an ultra wideband antenna solution for worldwide cellular applications. It has been designed to support 4G, 3G and 2G standards, including GSM, CDMA, DCS, PCS, GPRS, WCDMA, UMTS, HSPA, EVDO and LTE technologies, covering all cellular bands ranging from 698-960, 1710-2170 and 2500-2700 MHz. This omni-directional antenna provides a gain of 3 dB with a high-efficiency of up to 75% and provides consistent and stable connectivity with high throughput data to access points, routers, small base station, femtocells, repeaters, boosters, fleet management devices and other telematics devices with cellular needs. This antenna is ideal for major carrier approvals and certification process around the globe. The antenna can freely swivel 360 degrees and features a hinged connector up to 90 degrees, providing flexibility in orientation with respect to the device for easier installation or multiple antenna mounting options. Installation: There are two variat...Click here to view specs.

Flexible Embedded Antenna for WiFi 6E

The ANT-W63-FPC-UFL-100 from Linx Technologies is a Flexible Embedded Multiband Antenna for 6 GHz WiFi 6E (5.925 GHz to 7.125 GHz) and 2.4 /5 GHz WiFi/WLAN applications. It provides a peak gain of over 6.1 dBi and can handle up to 2 watts of power. This linearly polarized antenna provides an omnidirectional radiation pattern with up to 80% efficiency. The flexibility and adhesive backing make this antenna easy to mount in unique and custom enclosures while enabling an environmentally sealed enclosure and protection from tampering or accidental antenna damage. This embedded antenna does not require a ground plane and is comparable in performance to an external antenna. Connection to the radio is made via a 100 mm (3.94 in) long, 1.13 mm coaxial cable terminated in an MHF1/U.FL-compatible plug connector. It is ideal for 2.4 GHz ISM, IoT devices, smart home networking, and sensing and remote monitoring applications. Click here to view specs.

0 to 30 dB Bi-directional Attenuators from DC to 18 GHz

The MMC-CA-DC18-2-S-XX from Mesa Microwave is a Bi-directional Attenuator that operates from DC to 18 GHz. It is available in attenuation values from 0 to 30 dB and has a VSWR of up to 1.35:1. The attenuator can handle up to 2 W of power and is available in a module that measures 19.3 x 22.6 mm with SMA (M/F) connectors. Click here to view specs.

SOSA-Aligned Microwave Dual Upconverter for EW Applications

The SpectrumSeries RFM3103s from Mercury Systems is a SOSA-Aligned Microwave Dual Upconverter designed for electronic warfare (EW) applications. It upconverts an IF frequency from 1.375 to 2.375 GHz to an RF frequency from 6 to 8 GHz. The dual upconverter offers high dynamic range and performance operation with a low phase noise of -133 dBc/Hz (@100 MHz) and an internal local oscillator. It provides an OP1dB of 30 dBm with a gain of 21 dBm and a noise figure of 23 dB. The device has a tuning speed of 25 µs with a tuning resolution of 10 MHz. The RFM3103s has been built to meet SOSA specifications which means that this product is designed to meet the latest in open system standards supporting commonality among products for customers. Its design streamlines the deployment of the latest technology by increasing accessibility, efficiency, and maintaining interoperability, and configurability. The standard configuration of the RFM3103s unit consists of two transmit modules instal...Click here to view specs.

8-Bit Digitally Controlled, Phase Shifter from 32 to 37 GHz

The PS-360-3237-8-292FF from PMI RF is a High Speed, Millimeter Wave, 8-Bit Digitally Controlled, Phase Shifter that operates from 32 to 37 GHz. This phase shifter offers a total phase shift range of 358.593° having a step size of 1.406° and switches between states in less than 500 ns. It has a high level of accuracy with an amplitude error of ±1.5 dB and a phase shift error of ±1.3°. It has a low insertion loss of 13 dB and maintains a VSWR of 1.8:1. The PS-360-3237-8-292FF requires a +15/-15 VDC supply and consumes less than 20 mA of current. It is available in a compact housing measuring 1.15” x 1.80” x 0.4” with 2.92 mm female connectors. Click here to view specs.

30 Watt 2-Way Power Divider from 2 to 18 GHz

The 802-2-10.000 from MECA is a 2-Way Power Divider that operates from 2 to 18 GHz. It has an insertion loss of less than 1 dB, isolation of over 17 dB, and can handle up to 30 watts of average power. The device has an amplitude balance of 0.3 dB, a phase balance of up to 5-degrees, and an I/O VSWR of less than 1.50:1. This RoHS-compliant power divider is available in a module with SMA female connectors. Click here to view specs.

Dual 2.4 GHz Wi-Fi Front-End Module

The SKY55242-11 from Skyworks is a dual 2.4 GHz Front-End Module (FEM) that supports simultaneous 2 x 2.4 GHz WLAN including Bluetooth. It has two separate 2.4 GHz chains - each chain has a dedicated coupler and BT port. This highly-integrated module incorporates a 2.4 GHz power amplifier, a 2.4 GHz low noise amplifier with bypass and an SP3T transmit/receive switch. The FEM has a receive gain of 15 dB, a receive bypass loss of -5 dB, and requires a supply voltage of 3.85 V. It has three transmit modes with gains of 30, 26, and 17 dB. This device is available in a 4 x 3 x 0.7 mm 34-pin Multi-Chip Module (MCM) package and is ideal for 2.4 GHz Wi-Fi-enabled handsets, tablets, and mobile/portable systems. Click here to view specs.

2.5/5 GHz WLAN + Bluetooth SoC for IoT Applications

The 88W8977 from NXP is a WLAN (2.4/5 GHz) and Bluetooth System-on-Chip (SoC) that has been specifically designed to support the speed, reliability, and quality requirements of next-generation products. It provides both simultaneous and independent operation of the IEEE 802.11n compliant 1x1 spatial stream and Bluetooth v4.2, as well as planned enhancements of Bluetooth technology including features such as higher speeds, and mesh networking for increased Internet of Things (IoT) functionality. The device also provides or 3-way coexistence for WLAN, Bluetooth, and ZigBee operation. This SoC is available in QFN and eWLP package options with SDIO 3.0 and high-speed UART interfaces for connecting WLAN and Bluetooth technologies to the host processor and is ideal for mobile, wearables, IoT, IP cameras, and smart home applications. Click here to view specs.

10 MHz OCXO Available in Ultra-Compact 7x5 mm Package

The ROM7050PA from Rakon is a compact OCXO with an oscillation frequency of 10 MHz. It has a very small 7x5 mm footprint and meets the stringent requirements of 5G Remote Radio Head (RRH), small cell, optical network, and microwave transmission system applications. The OCXO has a phase noise of less than -157 dBc/Hz @10 kHz offset and frequency stability of +/-20 ppb over a temperature range from -40 to 95 degrees Celsius. It provides a CMOS waveform (1ns, 55%) at the output while operating from a supply voltage of 3.3 V. The RoHS compliant OCXO is available in tape and reel packaging and measures 7.5 x 5.5 x 3.3 mm. The ROM7050PA combines Rakon’s renowned patented Mercury+™ASIC with advanced SC-cut strip crystal technology to deliver excellent frequency stability in a miniature package. Click here to view specs.

1 to 36 GHz Space Qualified Dielectric Resonator Oscillator

The DRO-1087 from Microwave Dynamics is a Space Qualified Dielectric Resonator Oscillator (DRO) that can be configured to operate at a single frequency from 1 to 36 GHz. It is factory tuned to a specific frequency value and has a tuning range of +/-2 MHz using a 0 to 12 tuning voltage. The free-running DRO provides an output power of up to 13 dBm and has a phase noise of -90 dBc/Hz @ 10 kHz offset. This device requires a supply of 8V and consumes 90mA of current. The DRO-1087 is available in a hermetically sealed Kovar packaging (1.90 x 1.00 x 0.80 inches) and follows the device-level environmental screening, MIL-PRF/DTL, ESA and NASA. It is designed according to different classes and levels of military and aerospace agencies requirements MIL-PRF-38534, ASA, ESA, JAXA, ISRO, CNSA, and RFSA. Click here to view specs.

Stand Alone RF Tunnel Shielded Box from 20 MHz to 6 GHz

The HDRF-3590 from RF Electronics is a Stand Alone RF Tunnel Shielded Box that operates from 20 MHz to 6 GHz. This fully portable design is equipped with caster wheels for ease of movement. The interior of this enclosure measures 650 mm (W) X 650 mm (H) X 2050 (L). It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. The box has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals. The HDRF-3590 has a number of user-friendly I/O connection options that include HDMI, RJ45, USB, DB9, VGA, DB25 and AC/DC. It is ideal for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing. Click here to view specs.

12.2 GHz Surface Mount Voltage Controlled Oscillator

The DRO12200A from Z-Comm is a VCO that operates at 12.2 GHz. It delivers 3 dBm of output power into a 50Ω load with a low phase noise of -105 dBc/ Hz @ 10 kHz offset. The VCO has a tuning voltage range from 0 to 12 Vdc with a sensitivity of 0.5 MHz/V. It features a 2nd harmonic suppression of -35 dBc and consumes 23 mA of current while operating from a 5 Vdc supply. The DRO12200A is available as a surface mount module in an SDRO package and is ideal for SATCOM and test equipment applications. Click here to view specs.

100 W Solid State Power Amplifier from 32 to 38 GHz

The P100W32-38CWP from Polarity is a Solid State Power Amplifier that operates from 32 to 38 GHz. It provides a saturated output power of 100 watts with a small signal gain of over 52 dB. The amplifier has a pulse width of over 100 ns and a duty cycle of up to 100 %. It consists of high-efficiency GaN MMICs, spatially combined in a compact structure to achieve robust, high-performance power amplification. The amplifier incorporates a wide input range of AC - DC power supply, fan-forced convective thermal management, and an internal driver amplifier. It is available in a rack-mount package with a 2.92 mm (F) connector at the input and a WR28 waveguide interface at the output. It is ideal for use in test and measurement, radars, communications, and EMI testing applications. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (7 - 13 May, 2020)