Latest RF & Microwave Products of the Week (9

35200 MHz Waveguide Bandpass Filter

The AE35200WB11561 from Anatech Electronics is a Waveguide Band Pass Filter with a center frequency of 35200 MHz and bandwidth of 500 MHz. The filter has an insertion loss of under 2 dB and more than 50 dB of rejection above and below the passband. It can handle up to 10 watts of power and is available in a module that measures 80 x 15 x 8.5 mm with 2.92 mm female connectors. Click here to view specs.

Linear Gain Block from 0.05 to 3.8 GHz

The GRF2011 from Guerrilla RF is a broadband linear gain block that operates from 50 to 3800 MHz. It provides a P1dB of 22.7 dBm with a gain of 15.2 dB and a noise figure of 2 dB while operating at 900 MHz. The device requires a supply voltage from 2.7 to 8 V and consumes up to 100 mA of current. It is available in a 1.5 x 1.5 mm surface mount package and is ideal for small cells, wireless infrastructure and cellular repeater applications. The GRF2011 is internally matched to 50 Ohms at the input and output ports, needing only external DC blocks and a bias choke on the output. Click here to view specs.

20 W Power Transistor from DC to 18 GHz

The CHK8015-99F from UMS is a Gallium Nitride High Electron Mobility Transistor that operates up to 18 GHz. It provides 20 watts of power with 17 dB of signal gain and a power added efficiency of 68% @ 9 GHz. This device requires a 30 V supply and has been designed for a variety of RF power applications. It is available as a bare die that measures 0.88 x 2 x 0.1 mm. The circuit is manufactured using a 0.25µm gate length GaN HEMT technology on SiC substrate and requires an external matching circuitry. Click here to view specs.

RF Bipolar Transistor from DC to 12 GHz

The BFR740EL3 is a wideband RF heterojunction bipolar transistor (HBT) that operates from DC to 12 GHz. It delivers a gain of 20 dB with a noise figure of 0.8 dB @ 5.5 GHz while operating from a 3 V supply. This device is available in a low profile and small form factor leadless surface mount package. It is ideal for wireless communications, GNSS, satellite communications, ISM, TV, CATV and FM radio applications. The BFR740EL3 is qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Click here to view specs.

500 W GaN Power Amplifier from 0.8 to 4.2 GHz

The AMP2090B is a solid state power amplifier from Exodus that operates from 0.8 to 4.2 GHz. It provides an output power of more than 500 watts with a gain of over 57 dB. The class AB linear GaN amplifier has a wide instantaneous bandwidth and is suitable for all single channel modulation standards. It is available in a 6U rackmount chassis with N-type female connectors and has built-in protection circuits. The AMP2090B is ideal for broadband EMI/RFI, Lab, communications and EW applications. This amplifier system can be controlled via Ethernet, RJ-45 TCP/IP, RS422/485 and has an optional GPIB Interface. Click here to view specs.

400 W Symmetrical SPDT RF Switch from 20 to 520 MHz

The SSHPS 0.020-0.520-400 from Aethercomm is a high power symmetrical SPDT RF switch that operates from 20 to 520 MHz. This switch has been designed to be integrated in communication and Electronic Warfare (EW) systems where high power, low loss and excellent isolation are required. It can handle up to 400 watts of CW power and has a switching speed of 8 uSec. The switch requires a +28 Vdc supply and draws up to 550 mA of current. The SSHPS 0.020-0.520-400 can operate at temperatures from -30°C to +70°C up to 35,000 feet altitude. It meets the conditions specified in MIL-STD-202G, Method 213, Test Condition J (30G, 11mS, 18 Shocks - 3 in each of 6 axes). This unit meets the vibration conditions specified in MIL-STD-202G, Method 214A, Test Condition 1 and C. Click here to view specs.

10 dB Directional Coupler from 10 to 110 GHz

The 1100110010 from Krytar is a directional coupler that operates from 10 to 110 GHz. It has a coupling value of 10 dB with 1.8 dB variation over the band. The coupler has a directivity of over 7 dB and an insertion loss of less than 5.5 dB. It can handle up to 20 watts of power and has a VSWR of 2.5:1. The coupler is available in a module that measures 1.55 (L) x 0.38 (W) x 0.80 (H) inches with 1.0 mm female connectors and is ideal for electronic warfare (EW), commercial wireless, SATCOM, radar, signal monitoring and measurement. Click here to view specs.

290 to 928 MHz Low Power Transceiver

The SX1209 is a highly integrated RF transceiver that operates from 290 MHz to 928 MHz. This ISM Band transceiver has an Rx sensitivity down to -120 dBm at 1.2 kbps and is optimized for low power consumption while offering high RF output power and channelized operation. All major RF communication parameters are programmable and most of them can be dynamically set. The SX1209 provides the unique advantage of programmable narrow-band and wide-band communication modes without the need to modify external components. This ETSI and FCC complaint device is available in a QFN 24 package and is ideal for Automated Meter Reading, Wireless Sensor Networks, Home and Building Automation applications. Click here to view specs.

Low-power Digital Voice and Data Transceiver for 2.4 GHz Band

The SCT2400 is a highly integrated digital radio transceiver based on spread spectrum modulation that operates in the 2.4 GHz ISM band. It is designed to provide secure digital voice and data communication channels over a long range (up to 12km line of sight) for systems operating in both licensed and unlicensed bands. This device provides an exceptional range of 12 km (line of sight) with up to 100 mW of output power, while consuming just 10 mA in scan mode, around 52mA when receiving voice and just 64mA when transmitting voice. The SCT2400 operates from a single 3V supply and supports digital voice modes that include peer to peer, group call and broadcast, along with an SMS data mode. This transceiver has integrated CML’s voice coding expertise and advanced forward error correction, which maintains clarity and security over long ranges in low power radio systems such as Private Mobile Radio (PMR) and Land Mobile Radio (LMR). It is available in a 10 x 10 mm, 144-BGA package ...Click here to view specs.

15 W Coaxial RF Termination from DC to 3.8 GHz

The 02.02.65 from Hytem is a Termination that operates from DC to 3.8 GHz. This N-type male termination can handle up to 15 watts of power and has a VSWR of less than 1.30:1. The termination measures 70 x 36 x 43 mm and can operate from -55 to 125 degrees C. Click here to view specs.

Analog + Digital Phase Shifter from 24 to 28 GHz

The RFICPS01 from RFIC Solutions is an analog + digital hybrid phase shifter that operates from 24 to 28 GHz. It can be used with front end modules for beam steering a phased array antenna system. This phase shifter has a low insertion loss of under 10 dB @ 26 GHz and provides full 360-degree phase shift coverage over the band. It is available as a die that measures 1.4 x 1.2 mm. The analog part of the phase shifter is designed to give a constant phase variation or phase Delta of 100 degrees (varies based on the frequency). The digital part of this phase shifter can be used to provide additional phase shift up to 360 degrees. Click here to view specs.

6 dB Directional Coupler from 0.380 to 0.960 GHz

The 715-6-0.670 from MECA is a directional coupler that operates from 0.380 to 0.960 GHz. Available with coupling values of 6 dB, this coupler has an insertion loss of 0.1 dB and directivity of over 20 dB. It can handle an average power of up to 10 watts and has a VSWR of 1.20:1. The 715-6-0.670 is available in a module with N-type female connectors and is ideal for systems applications where precise monitoring, external leveling, signal mixing or swept transmission and reflection measurements are desired. Weather resistant models (IP61) for this product are also available. Click here to view specs.

2-Way Power Divider from 698 to 2700 MHz

The VPD-0627N2 from VidaRF is a 2-Way Power Divider that operates from 698 to 2700 MHz supporting all wireless applications from cellular through UMTS. This power divider can handle up to 50 watts of power and has a low insertion loss of 0.5 dB and high isolation of over 22 dB. It has an excellent amplitude and phase balance. The power divider is available in a module with N-type female connectors. Click here to view specs.

2-Way Power Divider from 0.5 to 18 GHz

The D-2185 from Werbel Microwave is a 2-way power divider that operates from 0.5 to 18 GHz. The divider has an insertion loss of less than 2.5 dB and an isolation of over 15 dB. It can handle up to 20 watts of power and has a good VSWR. The D-2185 is available in a module with SMA female connectors. Click here to view specs.

3-Way Power Divider/Combiner from 0.9 to 1.6 GHz

The SCG-3-162+ from Mini-Circuits is a 3-way power divider/combiner that operates from 0.9 to 1.6 GHz. It can handle up to 2 W of input power, has an insertion loss under 1.8 dB and isolation over 11.5 dB. This model is available in a surface mount ceramic package and is ideal for ISM and GPS applications. Click here to view specs.

SP8T PIN Diode Reflective Switch from 6 to 12 GHz

The SP8TR-060120S_A from Panda Microwave is a SP8T reflective PIN diode switch that operates from 6 to 12 GHz. It provides a low insertion loss of below 2.8 dB with an isolation of more than 80 dB and has a switching speed of less than 100 nsec. The switch can handle a power of up to 1 watt and has a VSWR of 1.5:1. It is available in a module that measures 105 x 38 x 10.2 mm with SMA female connectors. Click here to view specs.

8-Port Base Station Antenna from 617-896 and 1695-2690 MHz

The GP2408-06789 is a single-sector 8-Port MIMO antenna that operates from 617-896 MHz and 1695-2690 MHz covering 600 MHz/LTE/CELLULAR and AWS/PCS/WCS/BRS Bands. This 65° beamwidth dual-polarized antenna delivers a gain of up to 15.6 dBi and can handle an input power of 100 watts. It has a front-to-back ratio of less than 30 dB and port-to-port isolation of 20 dB. The antenna measuring 626 x 380 x 184 mm is ideal for Base Station, Small Cell and Outdoor DAS applications. Click here to view specs.

2.4 GHz Bluetooth Low Energy Wireless SoC

The KW31Z from NXP Semiconductors is an ultra-low-power, highly-integrated SoC that enables Bluetooth low energy v4.2, Generic FSK (at 250, 500 and 1000 kbps) or IEEE Standard 802.15.4 RF connectivity for portable, extremely low-power embedded systems. This Wireless SoC integrates a 2.4 GHz transceiver supporting FSK/GFSK modulations, an Arm Cortex-M0+ CPU, up to 512 KB Flash and up to 128 KB SRAM, Bluetooth Low Energy Link Layer hardware, hardware security and peripherals optimized to meet the requirements of the target applications. This SoC is ideal for applications including portable healthcare devices, wearable sports and fitness devices, AV remote controls, computer keyboards and mice, gaming controllers, access control security systems, smart energy and home area networks. Click here to view specs.

Lightweight Helical GNSS for UAV Applications

The HC872 is a lightweight helical antenna covering the GPS L1/L2, GLONASS G1/G2, Galileo E1, and BeiDou B1 frequency bands, as well as L-band correction services coverage, is designed and crafted for precision positioning. It has a precision-tuned helix element that provides excellent axial ratios and operates without the requirement of a ground plane, making them ideal for a variety of high-precision Unmanned Aerial Vehicle (UAV) applications. This active GNSS helical antenna has a low current Low Noise Amplifier (LNA), and includes integrated low-loss pre-filters, to protect against harmonic interference from high amplitude interfering signals, such as 700 MHz band LTE and other near in-band cellular signals. The HC872 is protected by a robust, military grade plastic enclosure with anintegrated SMA connector for screw on mounting that securely seals the unit with an O-ring complying with IP67 standards. Click here to view specs.

High-Temperature EPC Class 1 Gen 2 RFID Tag

The 390V1 (M-Cable tag) is an Alien Higgs 3 EPC Class 1 Gen 2 RFID tag that operates from 865 to 868 MHz. It is a high temperature tag that can operate from -40°C to +85°C & is specially designed for applications like boiler and engine identification. This tag has a very good read range, especially when attached to the metal. It measures 28 x 15 x 5 mm. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products of the Week (9 - 15 May, 2019)