Latest RF & Microwave Products this Week (23 May

1 W Coaxial Termination from DC to 65 GHz

The ANNE-50E+ from Mini-Circuits is a Coaxial Termination that operates from DC to 65 GHz. It can handle up to 1 watt of power. The termination measures 0.69 inches (length) x 0.36 inches (diameter) and is ideal for 5G, defense, aerospace, test labs, test and measurement applications. This model has a 1.85 mm-male connector which is mechanically compatible with 2.4 mm-female and V female connectors as well. The termination has an impedance of 50 ohms. Click here to view specs.

6-18GHz/10Watt/Module, Broadband High Power Amplifier Module (SSPA)

The KB60180M40A from KeyLink Microwave is a multi-octave high power amplifier that operates from 6 to 18 GHz. This GaN amplifier provides a saturated output power of 10 Watts with a gain of 40 dB. It is available in a module that measures 150 x 90 x 25 mm with SMA female connectors and is ideal for for jamming, EMC, test and measurement applications. The amplifier is matched to 50 ohms at the input/output and has built-in control and protection circuits. Click here to view specs.

50 Watt L-Band Solid State Power Amplifier

The NW-PA-13G05A is a GaN solid state power amplifier that operates from 800 to 2000 MHz. It has an output saturated power of 35 W, with a gain of 40 dB and efficiency greater than 40%. The Power Amplifier is available in an aluminum chassis which provides improved heat dissipation characteristics for higher-temperature operation. Click here to view specs.

Directional In-building Antenna from 698–960 MHz and 1710–2700 MHz

The CELLMAX-D-43i is a Directional In-building Antenna that operates from 698&ndash960 MHz and 1710&ndash2700 MHz. It has a horizontal beanwidth that varies from 54 to 128 degress and vertical beanwidth that varies from 38 to 85 degrees. This vertically polarized antenna has a low PIMm, VSWR and can handle up to 50 watts of input power. The antenna is matched to 50 ohms and has a 4.3-10 connector port. It is ideal for In-building use. Click here to view specs.

250 kHz to 20 GHz Multi-Channel Frequency Synthesizers

The HS9000 Series from Holzworth are Multi-Channel Frequency Synthesizers that operate from 250 kHz to 20 GHz. This is a unique platform that allows users to specify custom configurations for a COTS product. Units can be fitted with anywhere from 1 to 8 channels with the ability to specify each channel&rsquos frequency limits and performance options. The frequency synthesizer has excellent phase coherence between the independently controlled channels. It is available in a conductively cooled, fan-less enclosure (1U chassis). Click here to view specs.

DC to 7 GHz SPDT Non-Reflective Switch

The ASL 8011P4 from Aelius Semiconductors is a terminated SPDT MMIC switch that operates from DC to 7 GHz. The switch has a high isolation and low insertion loss through the band. It can handle up to 23 dBm of power (P1dB), requires a +5V/-5V power supply and can be controlled using TTL compatible voltage levels. This MMIC Switch is available in a low profile (4mm×4mm) QFN Package. It is ideal for use in cellular systems, base stations, broadband telecom equiment and test equipment. Click here to view specs

27 to 31 GHz GaN Solid State Power Amplifier

The SSPA 27.0-31.0-20 from Aethercomm is a GaN solid state power amplifier that operates from 27 to 31 GHz. It provides a power gain of more than 43 dB and an output power of 20 W while operating on a 28 Vdc power supply. This SSPA can be turned on and off in less than 10.0 uSec. It is available in a module that measures 4 x 5 x 2 inches with SMA female connector at the input port and WR-28 waveguide at the output port. This device is ideal for commercial, military and satellite applications. This power amplifier module operates from -40°C to +70°C and has protection from reverse polarity, output short and open circuit. Click here to view specs.

5 Watt Digital Repeater for 700/800 MHz Public Safety Bands

The PSR-78-9537 from ADRF Tech is a Channelized 5 Watt Digital Repeater designed for use in the 700 and 800 MHz bands which have been designated for use to firefighters and the police. The repeater has software defined filtering with up to 32 non-contiguous narrowband channels that can be controlled through ADRF's web or mobile GUI, as well as alarming outputs to supervised circuits for antenna, amplifier, power supply, battery, and charger failures. It has been designed to protect the lives of first responders and building occupants by ensuring blanket connectivity, regardless of the building layout and type of emergency. The PSR-78-9537 is compliant with IFC and NFPA Codes. Click here to view specs.

434 MHz Multi-Channel Transceiver for Industrial Control Applications

The STD-302Z is a 434 MHz Narrow Band Multi-Channel Transceiver module suitable for feedback systems, industrial remote control and telemetry applications. It provides up to 10 mW of RF power from its PLL-synthesized transmitter with programmable RF channels and has a receiver sensitivity of down to -119 dBm. When powered on, the STD-302Z can transmit and receive data 40 ms after the frequency setting data is sent to the PLL. It is available in a compact module that measures 1.2 x 1.97 x 0.36 inches and operates over a voltage of +3.0 to 5.5V, with internal circuitry operating at a regulated 2.8 V. The module has an operating temperature of -20 to +60 Degrees C and provides excellent vibration and shock resistance for products that are mobile or subject to movement. The STD-302Z complies with the European Category 1 (EN300 220). Click here to view specs.

1 to 20 GHz Solid State Power Amplifier

The AMP2120 is a solid state power amplifier that operates from 1 to 20 GHz. It provides an output power of more than 20 watts with a gain of over 43 dB. This rack mount amplifier can be controlled via the front panel on the amplifier system. It is available in a rack mount unit that measures 430 x 133 x 562 mm with SMA female connectors and weighs 20 kg. The AMP2120 has built-in protection circuits and is suitable for all single channel modulation standards. Click here to view specs.

75 to 110 GHz Benchtop Driver Amplifier

The STB-7531142515-1010-S1 from SAGE Millimeter is a benchtop driver amplifier that operates from 75 to 110 GHz. It provides a signal gain of 25 dB, P1dB of 15 dBm and saturated output power of 18 dBm across the whole band. The amplifier requires a single phase AC voltage, which can be supplied by a regular wall socket. This benchtop amplifier measures 5.51 x 4.72 x 2.81 inches and is ideal for antenna range boosting, power boosting and power amplification applications. The input and output port ports are both WR-10 waveguides with UG387/U flanges. Click here to view specs.

Mitered 2.92 mm plug to 2.92 mm jack 40 GHz In-Series Adapter

The ALS-K3K8-1.15 from Jyebao is a Mitered 2.92mm plug to 2.92mm jack adapter that operates at frequencies up to 40 GHz. This right-angle in-series adapter has been made out of passivated stainless steel. It is matched to 50 ohms and has a VSWR of 1.15:1. Click here to view specs.

RF Shielded Test Enclosure for Applications up to 6 GHz

The HDRF-1560-A from RF Electronics is a RF Shielded Test Enclosure that can be used to test devices operating up to 6 GHz. It has a thick RF absorbing foam that provides a reflection loss of over 18 dB at 2.4 GHz. The test enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals. The HDRF-1560-A has a number of user friendly I/O connection options that include HDMI, RJ45, USB, DB9, VGA, DB25 and AC/DC. The shielded box measures 438 x 390 x 565 mm and is ideal for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing. Click here to view specs.

3 Watt Compact Ku-Band Block Up Converter from 13.75 to 14.75 GHz

The ABA3GKX from Actox is a 3 Watt xtended Mini Full Ku-Band Block Up Converter that operates from 13.75 to 14.75 GHz. This BUC has been developed using GaN technology to enable high efficiency, low energy consumption and high reliability. It has an LO frequency of 12.8 GHz and an IF frequency from 950 MHz to 1950 MHz. The BUC requires an external reference frequency of 10 MHz and provides an output power of 3 Watts. It is available in a compact package and is RoHS compliant. Click here to view specs.

10.5 to 16 GHz Silicon Tx/Rx IC for RADAR, SATCOM Applications

The AWMF-0141 from Anokiwave is a Ku-Band Silicon Core IC for active steerable antenna arrays (AESA) that operate from 10.5 to 16 GHz. It has an integrated PA, LNA, 6-bit gain and phase control and a T/R switch. The IC provides 24 dB of transmit channel gain with a P1dB of 13.5 dBm and a receive channel gain of 30 dB with noise figure of 1.5 dB. The device has switchable outputs and can support half-duplex operation. It also has 6-bit amplitude and 6-bit phase controls included with low RMS amplitude and phase errors. The AWMF-0141 is available in a 2.5 mm x 2.5 mm WLCSP package and is ideal for RADAR, SATCOM and TDD/FDD applications. Click here to view specs.

Battery Operated Portable Multi-Band PIM Analyzer

The iTA Series of PIM analyzer from Kaelus are battery operated versatile PIM Test Analyzers that can be used in a number of test scenarios such as testing at the top of the tower, base of the tower, on the roof top and in-building for DAS systems. These IEC compliant 20 Watt, rugged testers include a tablet computer in a ruggedized case for remote control. The PIM Testers support a 3rd and 5th order measurement method and have residual PIM of less than -117 dBm/-160 dBc max (<-125dBm/-168dBc typ). These PIM analyzers have a transmit range from 728 MHz to 2690 MHz and a receive range from 698 MHz to 2570 MHz (Multiple frequency configurations available). Click here to view specs.

Fully-Matched GaN on SiC RF Power Transistor from 5 to 6 GHz

The IGT5259CW25 from Integra Technologies is a fully-matched RF GaN on SiC power transistor that operates from 5 to 6 GHz. The transistor provides up to 25 watts of power and with a gain of 12 dB and efficiency of 48% at CW conditions. It requires a 36 V drain bias voltage and requires a negative gate voltage and bias sequencing. It can be used in C-Band radars and for general purpose CW applications. Click here to view specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products this Week (23 May - 29 May, 2018)