Latest RF & Microwave Products This Week (23rd March to 28th March)

Low Cost YIG Frequency Synthesizer from 6 to 13 GHz

The YIG Frequency Synthesizer from teledyne microwave operates from 6 to 13 GHz. The synthesizer can generate a signal with a power level of more than 11 dBm, which has harmonics of -20 dBc and spurious suppression of -60 dBc. The frequency synthesizer has low phase noise of less than -125 dHc/Hz @ 100 KHz and has a channel step size of 1 MHz. It is available in a module with USB interface for control. The synthesizer can be directly plugged into laptop or desktop. Click here to see product specs.

Low IMD Drop-In Isolators from 824 to 2170 MHz

VidaRF has developed a range of drop-in isolators with low IMD that operate from 824 to 2170 MHz. The isolators have an insertion loss of below 0.2 dB and an Isolation of over 25 dB with IMD of -70 dBc (at 45 dBm 2 x tone, 5 MHz spacing). The Isolators can handle up to 150 watts of average forward power and 100 watts of reverse power and up to 500 watts of peak power. The isolators are BeO Free and RoHS complaint. These are ideal for wireless infrastructure applications. Click here to see product specs.

USB / Ethernet Programmable Attenuator 1 MHz to 8 GHz

The RCDAT-8000-60 from Mini-Circuits is a plug and play, single channel programmable attenuator that operates from 1 MHz to 8 GHz. The Attenuator provides 0 to 60 dB of attenuation in 0.25 dB steps and has short attenuation transition time of 800 ns. It is available in a module that measures 2.5 x 3 x 0.85 inches with SMA female connectors and is ideal for automated test equipment, satcom testing and production test applications. The attenuator can be controlled via USB or Ethernet (supporting both HTTP and Telnet network protocols). Click here to see product specs

40 dB Dual Directional Coupler from 100 kHz to 250 MHz

The 2CNK125-40 from Werbel Microwave is a Dual Directional Coupler that operates from 100 kHz to 250 MHz. It provides 40 dB of coupling with a directivity of above 20 dB and an insertion loss of 0.4 dB. The coupler can handle up to 250 watts of power with a VSWR of 1.20:1. It is available in a module with N-type female connectors. Click here to see product specs.

High Performance, Low Loss Cables upto 27 GHz

The 190MP from P1dB are high performance, low loss cables that operates up to 27 GHz. The coax used in these cables is a microporous dielectric for lower insertion loss and increased phase stability over temperature. The microporous coax is triple shielded for increased isolation and it has FEP jacket for extreme temperature applications. These cables are availabe with either SMA, 2.92 mm, N or TNC (male or female) connectors with passivated stainless steel bodies. Click here to see product specs.

2.45 / 5.4 GHz Low Loss Ceramic Chip Diplexer for Wi-Fi

The 2450DP15L5400 from Johanson Technology is an low loss ceramic chip diplexer with a low passband from 2.4 to 2.5 GHz and high passband from 4.9 to 5.95 GHz. It provides an isolation of more than 20 dB with an insertion loss of less than 0.65 dB. The diplexer can handle a up to 2 watts of power. This diplexer has been developed for Wi-Fi applications and exhibits low pass filtering (LPF) for the 2G band and band pass filtering (BPF) for the 5G Band. Click here to see product specs.

16-Way Radial Combiner/Divider from 2700 to 3500 MHz

The D9706 from Werlatone is a 16-way radial power combiner/divider that operates from 2700 to 3500 MHz. It has an insertion loss of less than 0.35 dB and an amplitude balance of under 0.3 dB. The divider can handle up to 6000 watts of CW power and has a VSWR of under 1.35:1. It is available in a module with N-type female connectors. Click here to see product specs.

4,000 Watt (Peak) Solid State Power Amplifier from 1000 to 2000 MHz

The 2207 is a new sclable RF Amplifier system that operates from 1000 to 2000 MHz. The system hardware architecture has been designed to save you money. To increase the power required from the amplifier, you just need to add power amplifier blocks to the system. Adding a 3U power amplifier block is accomplished easily and simply with no phase matching required. In addition to scalability, this amplifier offers an inherently rugged design and is based on next generation architecture that virtually eliminates every internal connector found in the industries typical RF/Microwave amplifier system. The amplifier can provide a power level of up to 4,000 Watts (Peak) with a gain of 66 dB. The gain can be adjusted by 20 dB. Click here to see product specs.

Wideband Horizontally Polarized Active Monitoring Antenna

The OMNI-A0156 from Alaris Antennas is a compact, active horizontally polarised receiving antenna that operates from 20 to 3000 MHz. The antenna has 2 ports which exit the antenna, one port covers the band from 20 to 1000 MHz and the second from 1000 to 3000 MHz. The antenna mounting flange supports watertight and vehicular installation. It delivers a gain of -8 dBi and has a VSWR of less than 2.5:1. This antenna is designed for either static use on shelters or can be installed on vehicles. Mounting is via the provided standard NATO and US 6/3/4 hole mounting flange. It measures 500 x 360 mm and is ideal for omni-directional monitoring. Click here to see product specs.

Solid State High Power GaN Amplifier from 4 to 8 GHz

The AMP1110 from Exodus Advanced Communications is a solid state high power amplifier that operates from 4 to 8 GHz. It delivers an output power of more than 40 Watts with a gain of over 46 dB and has a noise figure of below 8 dB. This GaN amplifier requires a supply voltage of 38 VDC and consumes up to 12 A of current. It is available as a compact module that measures 190 x 200 x 25 mm with SMA female connectors. The amplifier has been designed to be used with all single channel modulation standards and applications requiring high power and ultra-wide band coverage. It has built-in protection circuits, is highly reliable and rugged for harsh environments. Click here to see product specs.

LTE Uplink BAW Filter from 1920 to 1980 MHz

The TQQ7301 from Qorvo is an uplink BAW filter for LTE band 1 that operates from 1920 to 1980 MHz. It has low insertion loss, coupled with high attenuation. This filter is available in a compact 3 x 3 mm surface mount package that is suitable for Base Station Infrastructure applications, LTE data cards, repeaters and boosters. Click here to see product specs.

2.4 GHz Antenna Optimized for Metal Surfaces

The SR4W030 from Antenova is an antenna that operates from 2.4 to 2.5 GHz. This linearly polarized antenna delivers a peak gain of -0.5 dBi with an efficiency of more than 45%. The self-adhesive antenna measures 23 x 16 x 1.7 mm in dimension and is available with 150/200/250 mm cable length options. This antenna is ideal for smart meters, smart lightning and tracking moving objects. While antennas are usually positioned away from metal surfaces to prevent reflections, this antenna has been optimized to radiate on metal surfaces. The design of this antenna allows it to maintain its performance, without de-tuning, when it is mounted on various surfaces, including metal. Click here to see product specs.

21 dBm Power Amplifier from 1 to 18 GHz

The ERZ-HPA-0100-1800-21 is a power amplifier that operates from 1 to 18 GHz. It delivers a gain of 14 dB with a noise figure of 3.5 dB and provides an output power of 21 dBm. The amplifier requires a supply voltage of 12 V and consumes up to 166 mA of current. It is available in a module that measures 16 x 30 x 17.5 mm with SMA female connectors and is ideal for satcom, telecom, aerospace and military applications. Click here to see product specs.

Power Amplifier from 50 to 66 GHz for WiGig and P-to-P Applications

The HHPAV-510 from HXI is a power amplifier that operates from 50 to 66 GHz. It delivers a gain of 34 dB with an output power of more than 14 dBm. The amplifier requires a supply voltage of 6 VDC and consumes up to 400 mA of current. It is available in a module that measures 1.31 x 1.34 x 0.97 inches with WR-15 waveguide interfaces in an in-line configuration using the standard UG-385/U flange. The amplifier is ideal for point-to-point radios, radar transmitters, WiGig development and test equipment. It has a voltage regulator and bias sequencing circuitry allowing the use of a single bias to power the amplifier. Click here to see product specs.

4 dBi, 2 Section Collinear Omnidirectional Antenna from 2.2 to 2.5 GHz

The 1085-117 from Sothwest Antenna is a 2 section collinear omni-directional antenna that operates from 2.2 to 2.5 GHz. It delivers a gain of up to 4 dBi and can handle a power of up to 50 watts. This vertically polarized antenna measures 12 x 0.812 inches and is available with a RP-TNC (m) connector. It has a heavy duty spring base that measures 0.75 x 0.75 inches. Click here to see product specs.

Bandpass Filter

Lowpass Filter

Highpass Filter

Band Reject Filter

Diplexer

Triplexer

Flexible

Attenuators

Bends

Circulators

Directional Couplers

Isolators

Phase Shifter

Rotary Joints

Straights

Termination

Transitions

Waveguide to Coax Adapters

Rigid PCB Quotes

Flexible PCB Quotes

PCB Assembly Quotes

PCB Design Quotes

PCB Repair Quotes

PCB Stencil Quotes

Latest RF & Microwave Products This Week (23rd March to 28th March)