Latest RF & Microwave Products this Week (3 May - 8 May, 2018)

8-Way, Power Divider from 30 MHz to 6 GHz

The APD-8-30M6G-SFF from PMI RF is an 8-way power divider that operates from 30 MHz to 6 GHz. It provides a nominal insertion loss up to 8 dB, a reverse isolation of 36 dB, a noise figure of 6.5 dB and a VSWR of 2.0:1. The divider has an input 1 dB compression of -2.5 dBm and can handle up to 10 dBm of power. It is matched to 50 Ohms and requires a DC supply of +12 Vdc to +15 Vdc at 100 mA nominal current. It is available in a module with SMA female connectors and measures 4.5 x 4.3 x 0.5 inches. Click here to view specs.

Multilayer Organic Band Pass Filters from 620 to 5930 MHz

The BP Series from AVX Corporation are Multilayer Organic Band-Pass Filters that support 18 pass bands from 620 to 5930 MHz and have an ultralow profile of less than 0.556 mm. The series exhibits a low insertion loss of below 2.41 dB, low parasitics, 50 Ohm impedance and excellent rejection of out-of-band frequencies. These filters are rated for 1W continuous RF power and are based on AVX’s patented and proven multilayer organic (MLO®) high-density interconnect technology. Click here to see specs.

Mitered 2.92mm Plug to 3.5mm Jack Between Series Adapter up to 34.5 GHz

The ALS-K3PC8-1.25 from Jyebao is a Mitered 2.92 mm plug to 3.5 mm jack between series right angle adapter that operates up to 34.5 GHz. It has a VSWR of up to 1.25:1 and is matched to 50 ohms. The adapter has a BeCu center contact and retainer ring and has a stainless steel body. Click here to view specs.

58 to 64 GHz Waveguide Circulator

The YC148 from Micro Harmonics is a WR-15 circulator that operates from 58 to 64 GHz. It has an insertion loss of less than 0.4 dB and isolation of greater than 20 dB. This circulator is ideal for point-to-point radio links, portal security systems, radio astronomy and scientific instrumentation, such as plasma diagnostics, chemical spectroscopy and biomaterial analysis. Click here to view specs. 

6 Channel Single/Dual/Triple Bank PXI Multiplexers up to 50 GHz

The 40-785B PXI Microwave Multiplexers are single or dual 6-channel panel mounted multiplexer with relays mounted on the front panel. These are SP6T Microwave Multiplexers with 1, 2 or 3 independent banks. They are available in 2.5 GHz, 18 GHz, 26.5 GHz, 40 GHz and 50 GHz frequency options with excellent insertion loss and high isolation. The single slot version can support up to three supplied remotely mounted multiplexers. It occupies less PXI panel space and allows the microwave relays to be placed closer to the UUT and other RF test equipment. In some applications, it can shorten the length of cable runs and improve system performance. The remote multiplexers are supplied complete with a 1.5m interface cable. Click here to view specs.

Multi-polararized Antenna for Base Station Ham Radios and Scanners

The 08-ANT-0863 from MP Antenna is a multi-polararized antenna for base station ham radios and scanners. It operates from 25 MHz to 1300 MHz while receiving and uses the 220 & 440 MHz Bands for transmitting. This Super-M Classic antenna cab be used on the receiver and transmitter to further reduce problematic dead zones and flutter. It has a light weight construction and is easily mast mounted with included hardware. Click here to view specs.

Single Compact LTE Cat M1/NB1 and EGPRS Modules for Global Coverage

The SARA-R410M-02B module from u-blox is a compact LTE Cat M1/NB1 and EGPRS module that can be used Globally. It supports up to 16 LTE bands making it a great solution for Global coverage. The module has flexible mode selection for LTE Cat M1, LTE Cat NB1 and EGPRS.

The SARA-R410M-02B also has notable software-based configuration advantages within a single version of firmware. LTE bands can be enabled or disabled based on changing criteria such as the establishment of roaming agreements among operators. The flexibility extends further through system selection of the radio access technology (RAT) as either a single or preferred connection. The approved operator profiles for AT&T, Verizon, and Telstra are all included as pre-existing and selectable within software. The module has regulatory certification approvals in Taiwan (NCC) and EMEA (RED) broadening the global commercial reach. Click here to view specs.

Armored Test Cables Assemblies up to 50 GHz

The SiteLine Series from MegaPhase are Armored Test Cables that operate up to 50 GHz. They provide maximum flexibility and are jacketed with a highly weather resistant outer cover. The cables are designed for severe environments, such as flightline, outdoor antenna testing, and on-site field testing using portable network analyzers. These cable assemblies will endure extreme handling conditions and the physical stress associated with cable torquing, and floor crush conditions. These Phase & amplitude stable cables can be used to make cable assemblies with Type N, SMA, TNC, BNC, 3.5 mm, 2.92 mm, 2.4 mm, 1.85 mm and 7-16 DIN connectors. Click here to view specs.

Real Time Phase Noise Analyzer from 10 MHz to 6 GHz

The HA7402C from Holzworth is a real time phase noise analyzer that operates from 10 MHz to 6 GHz. It is a high performance, low cost solution that has been developed to eliminate bottlenecks on manufacturing test lines. This analyzer combines traditional analog phase noise measurement front-ends (which are spur free) with cross correlation analysis.

The analyzer requires two external LOs that enable it to achieve the lowest phase noise floors as well as blazing fast measurement speeds. Two separate LOs are required, as the engine needs non-coherent signals in order to cross correlate. The integrated frequency counters and power meters make the use of external LOs straight forward with a fully automated calibration routine. Click here to see specs.

16-way Power Divider from 0.8 to 3 GHz

The 816-S-1.900-M01 from MECA is a 16-way power divider that operates from 0.8 to 3 GHz. This power divider can handle up to 20 watts of power, has an insertion loss of 1.5 dB and isolation over 20 dB. It is available in a module with SMA-female connectors. Click here to view specs.

UAV Multi-GNSS Antenna

The HA32 from Hemisphere GNSS is a multi-GNSS, multi-frequency UAV antenna that supports GPS, GLONASS, Galileo and BeiDou. It is built on a proprietary 4-helix antenna technology that provides superior filtering and anti-jamming performance with LNA features such as low noise figure of 2.0 dB and up to 30 dB gain. The HA32 antenna is sealed in a durable and ruggedized IP67-rated enclosure that measures 40 x 75 mm, for protection against dust and water and is equipped with an O-ring. This antenna supports Hemisphere’s Atlas L-band correction service and is ideal for UAVs, GIS, surveying, RTK, and other applications requiring high-precision positioning and navigation. Click here to view specs.

16 to 26 GHz (X, Ku, K Band) High IP3 Double Balanced Mixer

The CMD255C3 from Custom MMIC is a general purpose double balanced mixer with a RF/LO frequency from 16 to 26 GHz. It has a low conversion loss of 6.5 dB, high LO to RF isolation of 40 dB, and a high input IP3 of 24 dBm across the bandwidth. The CMD255C3 can be used in both up/down converting systems and can be configured as an image reject mixer or single sideband modulator with external hybrids and power splitters. It is available in a 3 x 3 mm ceramic QFN surface mount package and can operate with an LO drive level as low as +15 dBm. Click here to view specs.

27 to 33 GHz Benchtop Power Amplifier for 5G mm-Wave Applications

The 955A from Millimeter Wave Products Inc. is a benchtop power amplifier that operates from 27 to 33 GHz. This power amplifier has been specifically developed for 5G mm-Wave applications. The amplifier provides a saturated output power of 36 dBm with a small signal gain of 40 dB. It requires 100-200 V AC Power to operate. The amplifier has waveguide input and output interfaces. Click here to view specs.

1 W Bias Tee from 10 MHz to 6 GHz

The BT Series from Lark Engineering are Bias Tees that operate from 10 MHz to 6 GHz. They can handle an RF power of up to 1 watt and an input current of up to 600 mA while operating over a supply of 5 - 28 V. They are available in connectorized or surface mount modules. Click here to see specs,

100 Watts Pulse Amplifier from 2.7 to 3.1 GHz

The M2.73.1G503948 from Elite RF is a power amplifier that operates from 2.7 to 3.1 GHz. It provides an output power of 100 watts and a gain of 39 dB while operating on a supply of 48 volts. The amplifier has been developed using advanced high power density LDMOS and GaN semiconductor devices that enable them to achieve high efficiency, high gain, and a wide dynamic range. It is available as a rack mount unit that measures 9 x 4 x 1.5 inches with SMA connectors. The amplifier has been designed for Pulse signals and general-purpose amplification and has a 5 year warranty. Click here to view specs.

WiFi, Bluetooth 5 and 802.15.4 Compliant RF Module

The RS9116 Modules based on Redpine Signals SoCs are multi-protocol wireless connectivity solutions supporting 802.11 a/b/g/n (2.4 GHz and 5 GHz), 802.11j, dual-mode Bluetooth 5 and 802.15.4 (also capable of running Thread or ZigBee). These modules have integrated baseband processor with calibration memory, RF transceiver, high-power amplifier, balun, T/R switch and flash memory. They provide a transmit power of up to 20 dBm with integrated PA and receive sensitivity as low as -104 dBm. These certified modules consumes ultra-low power with multiple power modes while operating over a single supply of  2.1 to 3.6 V or 1.85 V. They are available in various packages with and without antenna options. Click here to view specs.

2-Port USB Vector Network Analyzer from 100 kHz to 9 GHz

The C2209 from Copper Mountain Technologies is a 2-port modular vector network analyzer that operates from 100 kHz to 9 GHz. The VNA can measure all S parameters S11, S21, S12, S44 and can be controlled using any Windows PC or laptop. It has a dynamic range of up to 162 dB (1Hz IF BW), directivity of 46 dB and sweep speeds of as low as 10 microseconds per point. The analyzer provides Direct Receiver Access for special applications involving external directional coupling, including Load Pull and high-power measurements. It is available in a rack mount unit that measures 440 x 96 mm with BNC female connector and comes with standard three-year warranty. Click here to view specs.

High-Efficiency Transmitter Controller for Wireless Power Systems

The Semtech TS80002 is a high-efficiency transmitter controller for wireless power systems. It supports transmission of up to 5 watts of wireless power. The TS80002 performs the necessary coding of protocol to send commands to the transmitter to adjust the power level accordingly. It can be used in a wide array of low power wireless chargers for Smart Watches, Wearables, Toys, Portable Lighting and Medical Devices. Click here to view specs.