1. everything RF
  2. RF Newsletters
more
PREV 3 Aug, 2022 NEXT

New RF and Microwave Products this Week

3 Aug, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 3 Aug, 2022
 
Sponsored by PCB Directory
 
 
New RF and Microwave Products this Week
RF Variable Attenuator
USB Powered Digital Attenuator from 0.1 to 40 GHz
RF Variable Attenuator  from Vaunix

The Lab Brick® LDA-403 from Vaunix is a Solid-State Digital Attenuator that operates from 0.1 to 40 GHz. It has an attenuation range of 31.5 dB which can be controlled in 0.5 dB steps with a switching speed of 35 ns. This attenuator can handle an input power of 2 W and has an insertion loss of less than 9.5 dB. It can be controlled and powered by a USB port.
Download Datasheet Product Details
RF Amplifier
0.5 W Wideband RF Amplifier from 18 to 54 GHz
RF Amplifier  from Mini Circuits

The ZVA-543+ from Mini-Circuits is an RF Amplifier that operates from 18 to 54 GHz. It delivers a saturated output power of 0.5 W (~27 dBm) with a gain of 34 dB. This amplifier includes DC-protection features such as over-voltage, reverse voltage, and in-rush current to provide protection against mishandling. It requires a DC supply from 10 to 15 V and consumes less than 1.4 A of current.
Download Datasheet Product Details
RF Amplifier
Surface-Mount Low Noise Amplifier from 0.01 to 8 GHz
RF Amplifier  from ATEK MIDAS

The ATEK150P3 from ATEK MIDAS is a Low Noise Amplifier that operates from 0.01 to 8 GHz. It provides a gain of 21 dB with a noise figure of 1.5 dB and has a P1dB of 17 dBm. The operational low frequency range of this amplifier can be extended to lower frequencies by increasing external component values. It requires a DC supply of 5 V and consumes 83 mA of current.
Download Datasheet Product Details
RF Amplifier
Ultra-Low Noise Cryogenic Amplifier from 0.2 to 3 GHz
RF Amplifier  from Low Noise Factory

The LNF-LNC0.2_3A from Low Noise Factory is a Cryogenic Low Noise Amplifier that operates from 0.2 to 3 GHz. It provides 30 dB of gain with a noise figure of 0.02 dB and has a noise temperature of 1.6 K. This amplifier uses Low Noise Factory’s proprietary InP HEMT technology to provide high-performance. It requires a DC supply of 1.1 V and consumes 23 mA of current.
Download Datasheet Product Details
RF Variable Attenuator
8-Bit, 60 dB Programmable PIN Diode Attenuator from 8 to 10 GHz
RF Variable Attenuator  from Quantic PMI (Planar Monolithics)

The PDVAN-5010-60-8-OPT810 from Planar Monolithic Industries is an 8-Bit Programmable PIN Diode Attenuator that operates from 8 to 10 GHz. It has an attenuation range of 60 dB with a step size of 0.25 dB and switching time of 500 ns. The attenuator can handle an input power of up to 30 dBm and has an insertion loss of less than 2.7 dB.
Download Datasheet Product Details
Noise Source
Surface-Mount Noise Source from 200 kHz to 5 GHz
Noise Source  from Noisecom

The NC520 from Noisecom is a Noise Source that operates from 200 kHz to 5 GHz. It produces white gaussian noise with an output power of more than 25 dB ENR (-143 dBm/Hz) and has a crest factor of 5:1. This noise source contains all bias circuits and requires no external components. It has extremely flat output power versus frequency characteristics that are insensitive to temperature and voltage variations.
Download Datasheet Product Details
Featured Interview
Jim Nerschook from thinkRF
Interview with Jim Nerschook from thinkRF
everything RF recently interviewed Jim Nerschook, the Chief Operating Officer of thinkRF. Jim is an accomplished wireless industry veteran with strong expertise in the wireless and wireline test and measurement and monitoring market. He has in depth experience in developing strategic plans, developing hardware and SaaS solutions, leading organizational change and achieving double-digit growth. Click here to read more.
RF Amplifier
4 kW Pulsed Solid-State Amplifier System from 0.8 to 2.5 GHz
RF Amplifier  from AR RF/Microwave Instrumentation

The 4000SP0z8G2z5 from AR RF/Microwave Instrumentation is a Solid-State Pulsed Amplifier System that operates from 0.8 to 2.5 GHz. It delivers a peak pulsed output of more than 4000 W with 66 dB of gain. This Class B linear amplifier uses forced air cooling. The amplifier can be controlled by an LCD touch screen or remotely via GPIB/IEEE-488 format, RS-232 serial, and Ethernet interfaces.
Download Datasheet Product Details
Signal Generator
Miniature Signal Generator from 25 to 6000 MHz
Signal Generator  from Atlantic Microwave

The SG06-840001-S5S5 from Atlantic Microwave is a Miniature Signal Generator with frequencies from 25 to 6000 MHz and a step size of 100 Hz. It has an output power range from -17 to +13 dBm. This pocket-sized generator has spurious levels of -70 dBc, harmonics of -25 dBc, and phase noise of -94 dBc/Hz (@ 10 kHz offset from 1 to 3 GHz).
Download Datasheet Product Details
Anechoic Chamber
RF Shielded Chambers for Testing Devices up to 18 GHz
Anechoic Chamber  from RF Electronics

The HDRF-CHM Series from RF Electronics are RF Shielded Chambers that are designed for large area WLAN, multiple client/multiple AP wireless devices testing from 10 kHz to 18 GHz. The chambers use Non-combustible Pyramidal / Wedge / Flat (Multilayer) Absorbers. The type of absorber and the size of the chamber can be customized based on the requirement.
Download Datasheet Product Details
Software Defined Radio
30 MHz to 6 GHz Radio Transceiver with Deep Learning Processor
Software Defined Radio  from Deepwave Digital

The AIR8201-B from Deepwave Digital is an Artificial Intelligence Radio Transceiver (AIR-T) that operates from 300 MHz to 6 GHz (Tx) and 30 MHz to 6 GHz (Rx). It has been specifically designed as a complete deep learning/RF sensor for operation as an edge-compute device in harsh environments.
Download Datasheet Product Details
GNSS Module
Multi-Constellation GNSS Modules in the L1 and L5 Bands
GNSS Module  from Quectel

The LC29H Series from Quectel are Dual-Band, Multi-Constellation GNSS Modules that operate in the GPS/QZSS: L1 C/A, L5, GLONASS: L1, Galileo: E1, E5a, and BDS: B1, B2a bands. These GNSS modules have a sensitivity of -165 dBm during tracking and provide horizontal positioning accuracy of 1 m. They are designed to concurrently track GPS, BeiDou, Galileo, and QZSS satellite signals on L1 and L5 bands as well as GLONASS satellite signals on the L1 band.
Download Datasheet Product Details
Antenna
Antenna Band Switch Evaluation Board from 698-960 / 1710-2170 MHz
Antenna  from KYOCERA AVX

The 1004795-EC646-01 from KYOCERA AVX is an Antenna Band Switch Evaluation Board that operates from 698 to 960 MHz (Low Band) and 1710 to 2170 MHz (High Band). It consists of an LTE Antenna and Switch. This EVB uses the standard FR4 embedded LTE antenna 1004795 with the EC646 switch chipset for band switching or aperture tuning.
Download Datasheet Product Details
Sponsored by EMC Directory
 
 
RF Spectrum Analyzer
Real-Time Spectrum Analyzer with GPS to Store Location of Measurements
RF Spectrum Analyzer  from ThinkRF

The R5750 from thinkRF is a Real-Time Spectrum Analyzer with a frequency range from 9 kHz to 27 GHz with real-time bandwidth up to 100 MHz. It has an integrated GPS chipset that makes it possible to know the location and time of measurements. The analyzer is able to provide positional and temporal information with signal information that can generate a complete map of the signal environment.
Download Datasheet Product Details
Beamforming IC
5G Beamformer Phased Array Antenna-in-Package from 37 to 41 GHz
Beamforming IC  from Sivers Semiconductors

The ECLIPSE3741 from Sivers Semiconductors is a 5G Beamformer Phased Array Antenna-in-Package (AiP) module that operates from 37 to 41 GHz covering the 5G FR2 n260 band. It is designed for 5G mm-Wave wireless infrastructure systems to enable easier implementation, lower cost, compact solution, and a higher data rate.
Download Datasheet Product Details
Antenna
4G/LTE Flexible PCB Antenna from 698 to 3000 MHz
Antenna  from Taoglas

The FXUB62 from Taoglas is a Flexible 4G/LTE PCB Antenna that operates from 698 to 3000 MHz. This linearly polarized antenna provides a peak gain of 5 dBi with an efficiency of more than 45%. It has been designed to cover all cellular, 2.4 GHz Wi-Fi, ISM, and AGPS bands. The antenna can handle an input power of up to 5 W and has a VSWR of less than 5.2:1.
Download Datasheet Product Details
RF Amplifier
GaAs pHEMT MMIC Low Noise Amplifier from 23 to 31 GHz
RF Amplifier  from Analog Devices

The ADL8142-2 from Analog Devices is a GaAs pHEMT MMIC Low Noise Amplifier that operates from 23 to 31 GHz. It provides a gain of 26.5 dB with a noise figure of 1.8 dB and delivers a saturated output power of 10 dBm. The LNA requires a DC supply from 1.5 to 3.5 V and consumes 25 mA of current.
Download Datasheet Product Details
RF Amplifier
mmWave Low-Noise Amplifier Die from 57 to 71 GHz
RF Amplifier  from Altum RF

The ARF1207 from Altum RF is a Low Noise Amplifier that operates in the V-band from 57 to 71 GHz. It provides more than 20 dB of gain with a noise figure of 5 dB and saturated output power of 22 dBm. This linear amplifier has in-built ESD protection to simplify handling and assembly. It requires a DC bias voltage of 4 V and draws 250 mA of current.
Download Datasheet Product Details
RF & Microwave Isolator
10 W Drop-in Isolator from 9 to 18.25 GHz
RF & Microwave Isolator  from Renaissance Electronics Corporation

The 2H8BAM from Renaissance Electronics Corporation is a Drop-in Isolator that operates from 9 to 18.25 GHz. It provides more than 11 dB of isolation and has an insertion loss of 1 dB. This isolator can handle a forward input power of up to 10 W and a reverse input power of 5 W. It is available in a module that measures 0.50 x 0.21 inches and is ideal for use in satellite communication and radar communication applications.
Download Datasheet Product Details
RF Amplifier
1.25 W USB-C Controlled Benchtop Power Amplifier from 5 to 20 GHz
RF Amplifier  from DS Instruments

The PA20000 from DS Instruments is a Benchtop Power Amplifier that operates from 5 to 20 GHz. It delivers a saturated output power of 1.25 W (31 dBm) with a gain of up to 28 dB adjustable in 0.5 dB steps. It can be controlled via a USB-C interface for faster integration, and improved flexibility over traditional multi-voltage lab-supply powered devices.
Download Datasheet Product Details
Power Divider
2-Way, 20 W Power Divider from 0.5 to 8 GHz
Power Divider  from Werbel Microwave

The D-2085-N from Werbel Microwave is a 2-Way Power Divider that operates from 0.5 to 8 GHz. It can handle an input power of 20 W, has an insertion loss of less than 1 dB, and provides more than 12.5 dB of isolation. This power divider has a phase balance of ±6° and an amplitude balance of ±0.4 dB.
Download Datasheet Product Details
Tunable Filter
Surface-Mount Tunable Filter from 1.25 to 1.85 GHz
Tunable Filter  from Netcom

The 5694 from Netcom is a Tunable Filter that operates from 1.25 to 1.85 GHz with a bandwidth of 7%. It has a tuning resolution of 1 MHz and a tuning speed of less than 10 µs. This filter can handle an input power of up to 2 W and has an insertion loss of 5.5 dB. It requires a DC supply of 3.3 V and consumes less than 30 mA of current.
Download Datasheet Product Details
Tunable Filter
Tunable Bandpass Filter with Passband from 30 to 90 MHz
Tunable Filter  from NewEdge Signal Solutions

The SAX271-F1 from NewEdge Signal Solutions is a Tunable Bandpass Filter with a passband from 30 to 90 MHz. It can handle a CW input power of 5 W and a peak input power of up to 10 W. This filter has an insertion loss of less than 5.2 dB in the passband and provides 20 dB rejection above and below the passband.
Download Datasheet Product Details
In Series RF Adapter
SMPM Plug Adapter from DC to 40 GHz
In Series RF Adapter  from Amphenol RF

The 925-106A-51S from Amphenol RF is an SMPM Plug to SMPM Plug Adapter that operates from DC to 40 GHz. This 50-ohm adapter has a VSWR of less than 1.3:1 and an operating temperature range from -65°C to +165°C. It supports more than 100 mating cycles when mated with a full detent jack and more than 500 mating cycles when mated with a smooth bore jack.
Download Datasheet Product Details
RFID Tag
On/Off Metal RFID Tag from 860 to 960 MHz
RFID Tag  from Xerafy

The Versa Trak from Xerafy is an RFID Tag that is designed to work on both metal and non-metallic surfaces. It operates from 860 to 960 MHz and has a read range of up to 9 m (on metal) and 3 m (off metal). This tag is based on the Impinj M750 IC, which has an EPC memory of 96 bits, a user memory of 32 bits, and a TID serialized memory of 96 bits.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwaveindustry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]