Featured Products this Week |
|
|
180-degree Hybrid Power Combiner/Divider from 350 to 1000 MHz |
180 Degree Hybrid Coupler
from Werlatone Inc
|
The H9395 from Werlatone is a 180 degree Hybrid Power Combiner/Divider that operates from 350 to 1000 MHz. It can handle up-to 250 W of CW input power while providing isolation of 20 dB. The device has an insertion loss of less than 0.3 dB and a VSWR of 1.3:1. It has a phase balance of 180 degrees and an amplitude balance of 0.4 dB. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
100 Watt GaN on SiC HEMT from DC to 3.5 GHz |
RF Transistor
from Qorvo
|
The TGF2929-HM from Qorvo is a 100 W (P3dB) discrete GaN on SiC HEMT that operates from DC to 3.5 GHz. It provides a linear gain of 17.4 dB and requires a 28 V DC Supply. The device has been developed on Qorvo proven QGaN25HV process, which features advanced field plate techniques to optimize power and efficiency at high drain bias operating conditions. |
|
Download Datasheet
Product Details | |
|
|
|
Surface-Mount Planar Lowpass Filter with Passband from DC to 12.8 GHz |
Low Pass RF Filter
from Smiths Interconnect
|
The 3LPFX-12800-M from Smiths Interconnect is a Planar Lowpass Filter with a cutoff frequency of 12.8 GHz. It can handle an input power of 1 W, has a passband insertion loss of less than 1.5 dB and provides a stopband rejection of 40 dBc (@18.9 to 31.2 GHz). This X-Band filter leverages thin film process technology on various dielectric substrates and is designed for use in harsh environments. |
|
Download Datasheet
Product Details | |
|
|
|
67 GHz Flexible, Colour-Coded VNA Test Cable Assemblies |
RF Cable Assembly
from Maury Microwave
|
The StabilityVNA™ (SV-Series) from Maury Microwave are 67 GHz Test Port VNA Cable Assemblies. They offer excellent amplitude and phase stability with flexure, thereby improving measurement accuracy while reducing measurement uncertainty. These cable assemblies have excellent flexibility and anti-skid bands to ensure the cables can be arbitrarily positioned without spring-back or stress on DUTs. |
|
Download Datasheet
Product Details | |
|
|
|
WR90 4-Port Differential Phase Shifter (Duplexer) from 9.2 to 10.2 GHz |
RF Duplexer
from Scientific Microwave Corporation
|
The WR90 4-Port Differential Phase Shifter (Duplexer) from Scientific Microwave Corporation operates from 9.20 to 10.20 GHz. It is designed for applications where precise phase control, high-power handling, and thermal management are crucial. This duplexer combines phase shifting and excellent isolation in a single device, allowing it to operate efficiently under high-power conditions often observed in industrial, scientific, and advanced communication/radar systems. |
|
Download Datasheet
Product Details | |
|
|
Sponsored by Marki Microwave | |
|
|
In-Line Waveguide-to-Coaxial Adapter from 17.7 to 22 GHz |
Waveguide to Coax Adapter
from AmpliTech, Inc.
|
The WR0042E from AmpliTech is a Waveguide-to-Coaxial Adapter that operates from 17.7 to 22 GHz. It has an insertion loss of less than 0.4 dB and a VSWR of 1.20:1. This in-line adapter offers excellent performance and very low insertion loss in a lightweight and compact form-factor, making it suitable for use in test equipment and receivers. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Cellular/Non-Cellular OTA Conformance Test System from 400 MHz to 18 GHz |
Conformance Test System
from Rohde & Schwarz
|
The R&S TS8991 from Rohde & Schwarz is an OTA Conformance Test System with a frequency range from 400 MHz to 18 GHz. It is designed to conduct OTA measurements according to CTIA and 3GPP specifications, allowing customizations with improved test speeds for R&D purposes. This test system can be flexibly configured to meet user-specific requirements and allows users to upgrade its flexible hardware and software, which helps reduce system downtime, complexity, and cost. |
|
Download Datasheet
Product Details | |
|
|
|
Portable 1-Port Vector Network Analyzer from 85 MHz to 14 GHz |
Vector Network Analyzer
from Copper Mountain Technologies
|
The R140B from Copper Mountain Technologies is a 1-Port Vector Network Analyzer that operates from 85 MHz to 14 GHz. It supports linear, log and segment sweeps with up to 100,001 measurement points per sweep and a measurement time of 170 µs per point. This VNA has a dynamic range of 112 dB (85 – 4.8 GHz) and a directivity of 42 dB. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Silicon SPST Non-reflective Switch from 100 MHz to 55 GHz |
RF Switch
from Analog Devices
|
The ADRF5010 from Analog Devices is a Silicon SPST Non-reflective Switch that operates from 100 MHz to 55 GHz. It has a switching speed of 30 ns, provides an isolation of 30 dB, and an insertion loss of less than 2 dB. This switch can handle an input power of up to 30 dBm (~1 W), a peak input power of 36 dBm (~4 W), and has a return loss of 19 to 22 dB. |
|
Download Datasheet
Product Details | |
|
|
|
Multi-Beam, Phase Array Antenna from 5.2 to 5.875 GHz |
Antenna
from ET Industries
|
The 6ET2P56 from ET Industries is a Multi-Beam Antenna that operates from 5.2 to 5.875 GHz. This phase array antenna incorporates beam forming and beam shaping technology that produce six beams, each with a 90° beamwidth. Multibeam antennas can provide increased wireless communications capacity with enhanced spectral efficiency and higher quality of service which results in lower networking operating costs. |
|
Download Datasheet
Product Details | |
|
|
|
1:2 Balanced-to-Unbalanced Transformer from 0.18 to 1.9 GHz |
Balun
from TTM Technologies
|
The XMB0220K1-50100G from TTM Technologies is a Balanced-to-Unbalanced Transformer that operates from 0.18 to 1.9 GHz. It can handle a CW input power of 1 W, has an impedance ratio of 1:2, and an insertion loss of less than 5 dB. This Balun has an amplitude balance of ±0.6 dB and a phase balance of ±4°. It enables single-ended signals to be applied to differential ports on analog-to-digital and digital-to-analog converters and integrated RF chipsets used in radar to Internet of Things sensors. |
|
Download Datasheet
Product Details | |
|
|
|
Flexible Armored/Non-Armored Cable Assemblies from DC to 67 GHz |
RF Cable Assembly
from Junkosha
|
The MWX2 Series from Gap Wireless are Flexible Cable Assemblies that operate from DC to 67 GHz. They are designed for measuring instruments and have low repulsion to reduce stress loads to measured objects with excellent phase stability against bending. These 50-ohm cable assemblies are available in standard armored type, lightweight armored type and non-armored type variants. |
|
Download Datasheet
Product Details | |
|
|
|
PXIe Terminated SPDT Microwave Relay from 18 to 110 GHz |
PXI RF Switch
from Pickering Interfaces
|
The 42-781A-92x from Pickering is a PXIe Terminated SPDT Microwave Relays that operates from 18 to 110 GHz. It can handle RF power of up to 35 W, has an insertion loss of less than 2.5 dB, and provides more than 50 dB of isolation. This microwave relay consists of one or two microwave changeover switches and is available with external terminations and connections via front panel-mounted SMA 1.0 connectors. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
RF Quadplexer from 2 to 18 GHz |
Quadplexer
from PLEXSA MANUFACTURING
|
The QUAD61014TCA from Plexa Manufacturing is RF Quadplexer that has passbands from: 2 to 6 GHz, 6 to 10 GHz, 10 to 14 GHz, and 14 to 18 GHz. It has a return loss of 13 dB, isolation of more than 60 dB, and insertion loss of less than 1 dB. This quadplexer is based on suspended substrate stripline technology and can be used to split a broadband input into five adjacent frequency bands or combine five bands into a single output. |
|
Download Datasheet
Product Details | |
|
|
|
Low Noise Amplifier from DC to 22 GHz |
RF Amplifier
from Z-COMM
|
The AWB0022M from Z-Communications is a Low Noise Amplifier that operates from DC to 22 GHz. It delivers a gain of 12 dB with a noise figure of 3.5 dB and provides an output P1dB of 19 dBm. This wideband LNA has a return loss of 13 dB at the input and 12 dB at the output. It requires a DC supply of 12 V and consumes 72 mA of current. |
|
Download Datasheet
Product Details | |
|
|
|
Tri-Band Downconverter from 37.5 to 42 GHz |
Low Noise Block
from ITS Electronics
|
The DC-37A542A0TR-1330 from ITS Electronics is a Downconverter that converts input frequencies from 37.5-39 GHz (Band 1) / 39-40 GHz (Band 2) / 40.5-42 GHz (Band 3) to output frequencies from 950 to 2450 MHz. It provides an output P1dB of more than +13 dBm with a conversion gain of 30 dB. This downconverter has spurious levels of up to -70 dBm, harmonics of less than -55 dBc, and an SSB phase noise of -85 dBc/Hz (at 1 kHz offset). |
|
Download Datasheet
Product Details | |
|
|
|
5-Bit Programmable PIN Diode Attenuator from 100 MHz to 40 GHz |
RF Variable Attenuator
from Quantic PMI (Planar Monolithics)
|
The DTA-100M40G-30-CD-1 from PMI is a 5-Bit programmable PIN diode attenuator that operates from 100 MHz to 40 GHz. It has an attenuation range of 30 dB with a step resolution of 1.0 dB. This attenuator provides ultra-fast switching speeds of 300 ns and can handle an input power of upto 24 dBm. It operates on a single 15 VDC supply and draws only 40 mA of current. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Programmable AWGN Noise Generators from 10 MHz to 3 GHz |
Noise Generator
from Boonton
|
The NGX1000 Series from Boonton are Programmable Noise Generators that operate from 10 MHz to 3 GHz. They generate additive white gaussian noise (AWGN) with an output power of 0/+10 dBm and have a noise attenuation range from 0 to 127 dB in 0.1 dB steps. These noise generators can be controlled manually via a 5-inch touchscreen display or remotely via Ethernet. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|