| New RF and Microwave Products this Week |
|
|
| 2T2R Beamformer IC from 24.0 GHz to 29.5 GHz | |
RF Transceiver
from Analog Devices
|
| The ADMV1228 from Analog Devices is a 2T2R Beamformer IC that operates from 24.0 GHz to 29.5 GHz. It has an integrated 16 (2x8) channel beamformer paired with a 2 transmit (TX) and 2 receive (RX) channel upconverter/downconverter (UDC). This dual polarization beamformer IC has on-chip transmit-receive switches that connect the upconverter RF output and downconverter RF input for each polarization into eight independent channels via the 1:8 power splitters/combiners. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-THz Waveguide Automated Tuners from 110 to 330 GHz | |
Automated Tuner
from Maury Microwave
|
| The Nano-Series from Maury Microwave are Sub-THz Automated Tuners that operate from 110 to 330 GHz. They have a matching range of up to 35:1 and vector repeatability of more than -40 dB. These tuners can handle a CW power of 20 W, a peak power of 200 W and have an insertion loss of less than 1.35 dB. They have a waveguide interface. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 kW Pulsed Solid-State Power Amplifier from 4 to 8 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2083P-2KW from Exodus Advanced Communications is a Pulsed Solid-state Power Amplifier that operates from 4 to 8 GHz. It delivers a peak output power of 2 kW with a gain of more than 63 dB and has a pulse width of up to 100 us. This Class AB amplifier has a duty cycle of up to 6% and peak rise/fall times of less than 50 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| LDMOS Signal Source Module for 2.4 GHz RF Energy Applications | |
Signal Generator
from Mini Circuits
|
| The RFS-2G42G5050X+ from Mini-Circuits is a Solid-State Signal Source Module that operates from 2.4 to 2.5 GHz. It has a signal generator that can support different types of applications and can also be used as a stand-alone high-power amplifier. This signal source can be configured to operate as a high-power amplifier, delivering a CW/pulsed output power of up to 50 W (47 dBm) with a power gain of 51.5 dB and an efficiency of 42%. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 kW LDMOS Power Amplifier from 1 to 400 MHz | |
RF Amplifier
from Watech Electronics
|
| The HTE9G04P2K0H(B) from Watech Electronics is a Power Amplifier that operates from 1 to 400 MHz. It delivers a saturated output power of 2000 W (~63.01 dBm) with a gain of 29 dB and has an efficiency of 68 to 85%. This LDMOS-based amplifier has excellent thermal stability due to its low thermal resistance package and a rugged unmatched design. It is ideal for ISM band applications like laser generation, plasma generation, MRI, and particle accelerators. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount Fixed Attenuators from DC to 30 GHz | |
Fixed Attenuator
from Inmet by Spectrum Control
|
| The PCA3060 Series from Inmet by Spectrum Control are Surface-Mount Fixed Attenuators that operate from DC to 30 GHz. They have an attenuation range from 0 to 10 (1 dB Steps), 12, 15 & 20 dB. These attenuators can handle up to 1 W of average power and have a VSWR of less than 1.5:1. They are designed to reduce the signal power uniformly at different frequencies, temperatures, and power levels. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Microwave Products Group | | MPG: SWaP-OPTIMIZED SOLUTIONS | | Experience unparalleled performance with MPG’s RF and Microwave Filters, Switches, and Solutions. Our advanced technologies deliver high performance and can be customized to meet the most stringent application requirements. Connect with an Engineer today! Click here to learn more. | | | |
|
|
| 3-Stage GaN Power Amplifier MMIC from 17 to 21.5 GHz | |
RF Amplifier
from United Monolithic Semiconductors
|
| The CHA6251-QKB from United Monolithic Semiconductors is a 3-Stage GaN power amplifier MMIC that operates from 17 to 21.5 GHz. It delivers an output power of 37 dBm (~5 W) with a gain of more than 30 dB and a power-added efficiency (PAE) of 42%. This amplifier is manufactured using a GaN-on-SiC HEMT process. It requires a DC supply of 14 V and consumes 125 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-Port VNA from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN0906 from Copper Mountain Technologies is a 6-Port VNA that operates from 300 kHz to 9 GHz. This VNA has a dynamic range of 140 dB and an output power adjustment range of -45 to +10 dBm with a noise floor of less than -138 dBm/Hz. It has a measurement speed of 24 μs and 2 to 500,001 measurement points per sweep. This VNA is also available in 8, 10, 12, 14, and 16 port configurations. |
| |
Download Datasheet
Product Details | |
|
|
|
| Non-PLL Based RF Signal Generators from 10 MHz to 6 GHz | |
Signal Generator
from Boonton
|
| The SGX1000 Series from Boonton are RF Signal Generators that operate from 10 MHz to 6 GHz. They deliver an output power from -50 dBm to +18 dBm with a power resolution of 0.01 dB and have a frequency step size of 0.001 Hz. These signal generators utilize a unique non-phase locked loop (PLL) design with a digital front-end and direct, proprietary back-end. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ferrite Chip Inductors from 47 nH to 22 µH | |
RF Inductor
from Coilcraft
|
| The 0603LS Series from Coilcraft are Ferrite Chip Inductors with inductance values ranging from 47 nH to 22 µH. They have a high Q-factor of up to 22 (at 2.5 GHz) and self-resonant frequency (SRF) values ranging from 19 to 1500 MHz. These inductors have DC resistances of less than 8.81 Ohms and a current rating of up to 1.4 A. They are available in a compact 1608 package size that measures 1.8 x 1.12 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP67/IP68-Rated Waterproof RF and Microwave Connectors | |
RF Connector
from IntelliConnect
|
| The Pisces Series are waterproof connectors from IntelliConnect that have been developed for use in mil-aerospace, SCADA, marine, medical, transportation, and oil and gas applications. These IP67 and IP68 rated connectors are sealed internally and are therefore waterproof when unmated. They are available in various connector formats that include: ABMS (Rugged MCX), N-Type, Push-Pull, TNC, and SMA.ABMS is a special sub-miniature connector interface originally designed for use with cochlear implants. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cryogenic Low Noise Amplifier from 4 to 8 GHz | |
RF Amplifier
from Withwave
|
| The Cryogenic Low Noise Amplifier (LNA) from Withwave operates from 4 to 8 GHz. It provides a gain from 36 to 45 dB with a noise figure of less than 0.05 dB and a noise temperature of up to 3.6 K. This LNA uses InP HEMT technology and it is tested and verified using Withwave’s 4 K cryogenic measurement system. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Microwave Products Group | | |
|
|
| WR-06 Waveguide to 0.8 mm Coaxial Adapter from 110 to 145 GHz | |
Waveguide to Coax Adapter
from AT Microwave
|
| The AT-WC-0608M-E1 from AT Microwave is a Waveguide-to-Coaxial Adapter that operates from 110 to 145 GHz. It has a WR-06 waveguide interface with a UG-387/U-M flange and a 0.8 mm (male) coaxial connector interface. This end-launch adapter is ideal for accurate system measurements, general lab tests, system setups, and 5G/6G applications. It can also operate up to 170 GHz with some degradation in performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wideband Low Noise Amplifier from 0.1 to 24 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-LNA-0010-2400-30-4 from ERZIA is a Wideband Low Noise Amplifier (LNA) that operates from 0.1 to 24 GHz. It provides a small signal gain of 30 dB with a noise figure of 4.5 dB and has an output P1dB of 12 dBm. This RoHS-compliant amplifier requires a DC supply of 12 V and consumes 1 W of power. It is ideal for laboratory, SATCOM, telecom, space, aerospace, military, and industrial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE-Advanced Cat 12/15 Chip from 700 MHz to 3.8 GHz | |
Cellular Module
from GCT Semiconductor
|
| The GDM7243A from GCT Semiconductor is an LTE-Advanced Cat 12/15 Chip that operates from 700-900 MHz (low-band), 1.4-2.1 GHz (mid-band), 1.7-2.6 GHz (high-band), and 3.4-3.8 GHz (U-high band). It complies with the 3GPP Release 12 standard. This single chip supports FDD/TDD LTE Category 12/15 technologies with 2CA 4x4 MIMO and 3CA/4CA 2x2 MIMO. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 868 MHz Radio Module for Smart Metering Applications | |
RF Module
from Wurth Elektronik
|
| The Metis-e from Wurth Elektronik is a Radio Module that operates from 868.3 to 869.525 MHz (868 MHz band). It is designed for wireless communication between smart meters and gateways using the wM-Bus interface. This module consists of an ARM Cortex M3 processor, a radio core, voltage regulator, RF filter and 50-Ohm matching, and a high accuracy crystal. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Band High Precision GNSS Antenna from 1166 to 1602 MHz | |
GPS/GNSS Antenna
from u-blox AG
|
| The ANN-MB2 from u-blox is a Multi-Band GNSS Antenna that operates from 1166 to 1285 MHz (L1 band) and 1535 to 1602 MHz (L5/L2/B3/E6 bands). It is a combination of a patch antenna and an RF front end. The patch antenna delivers a gain of 4.2 to 5.4 dBi and has an efficiency of 50-64%. It has an RHCP polarization and an axial ratio of 0.5 to 2.9 dB (Zenith). |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5 GHz Wi-Fi 802.11ac and Bluetooth v5.0 SoC | |
Wireless Chipset
from Qualcomm
|
| The QCA6174A from Qualcomm is a Wi-Fi 802.11ac and Bluetooth v5.0 SoC that operates at 2.4 GHz and 5 GHz. It integrates a Tensilica CPU with 1216 KB RAM & 448 KB ROM for Wi-Fi, 192 KB RAM, and 672 KB ROM for Bluetooth, along with an integrated RF front-end. This SoC has a 2-antenna configuration for 2x2 MU-MIMO and an Rx sensitivity of up to -96 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| SPDT Reflective Switch from 1 to 1000 MHz | |
RF Switch
from Tagore Technology
|
| The TS86246P from Tagore Technology is an SPDT reflective switch that operates in the frequency range of 1 to 1000 MHz. This switch has an insertion loss of less than 0.16 dB and provides an isolation of more than 23 dB. It can handle an input power of up to 200 W and has a return loss of 40 dB. The switch requires a supply voltage of 5.5 V and draws less than 260 µA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 76.4 W Surface Mount GaN Hybrid Power Amplifier from 2.7 to 3.1 GHz | |
RF Amplifier
from RFHIC
|
| The PRM29060-4S from RFHIC is a GaN Hybrid Power Amplifier that operates from 2.7 to 3.1 GHz. This HPA delivers a saturated output power of 76.4 W with a small signal gain of 42.1 dB and a power-added efficiency (PAE) of 61.1%. It is based on GaN on SiC Technology and is internally matched to 50 Ohms with inbuilt DC-blocking capacitors on both the input and output ports. It is ideal for military and commercial radar systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W Power Limiter from 1 to 18 GHz | |
Limiter
from Quantic PMI (Planar Monolithics)
|
| The LM-1G18G-15-10W-500WP-SFF from Quantic PMI is a Power Limiter that operates from 1 to 18 GHz. It can handle a CW input power of up to 10 W and a peak input power of 500 W (at 0.1% duty cycle, 1 µs pulse width) with a VSWR of less than 2.0:1. This limiter has an insertion loss of less than 2.5 dB and provides a leakage of +17 dBm with a receovery time of 100 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Profile Coaxial RF Connector from DC to 12 GHz | |
RF Connector
from I-PEX
|
| The MHF 5 from I-PEX is a Coaxial RF Connector that operates from DC to 12 GHz. It includes a plug that supports micro-coaxial cables (AWG) of diameter 0.64, 0.81 or 0.48 mm and a low-profile receptacle that has a height of less than 1 mm after mating. This connector has a VSWR of less than 1.8:1 and I-PEX’s ZenShield® for RF shielding. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 MHz Quad-Channel Benchtop Rubidium Frequency Calibrator/Analyzer | |
Frequency Counter
from Pendulum Instruments
|
| The CNT-104R from Pendulum Instruments is a Quad-Channel Rubidium Frequency Calibrator/Analyzer that operates up to 400 MHz (optional RF input bandwidth up to 24 GHz available). This instrument combines an ultra-stable Rubidium frequency reference with a multi-channel frequency analyzer, resulting in a one-box solution that caters to ultra-high precision calibration applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 4-Channel 16-Bit Arbitrary Waveform Generator Up to 400 MHz | |
Arbitrary Waveform Generator
from Spectrum Instrumentation
|
| The M4x.6631-x4 from Spectrum Instrumentation is a 4-Channel Arbitrary Waveform Generator (AWG) that operates up to 400 MHz. This AWG is designed to deliver the highest performance with a sampling rate of 1.25 GSPS (on 2 channels) and a resolution of 16 bits. It consists of an FPGA, analog module interface, memory, comparators, trigger, clock, PLL, transmission lines, programmable reference, PCIe interface, and other passive components. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
