| New RF and Microwave Products this Week |
|
|
|
|
|
|
|
| Drop-In 90° Hybrid Coupler from 2.4 to 2.5 GHz | |
90 Degree Hybrid Coupler
from Innovative Power Products
|
| The IPP-2393 from Innovative Power Products is a 90° Hybrid Coupler that operates from 2.4 to 2.5 GHz. This 3 dB coupler provides an isolation of more than 17 dB and has an insertion loss of less than 0.25 dB. It can handle an input power of 1000 W and has a VSWR of less than 1.30:1. This hybrid coupler has a phase balance of ±5° and an amplitude balance of ±0.30 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 180° Hybrid Coupler from 2.2 to 2.4 GHz | |
180 Degree Hybrid Coupler
from Renaissance Electronics Corporation
|
| The 10A4NA-180 from Renaissance is a 180° Hybrid Coupler that operates from 2.2 to 2.4 GHz. This 3dB coupler has an insertion loss of 3.5 dB and can handle an input power of up to 20 W. It has an amplitude balance of 0.4 dB and a phase balance of less than 1.5°. It is compatible with flight systems and is stable for a temperature range of -20°C to 65°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 to 8 GHz USB Controlled Phase Shifter | |
Digital Phase Shifter
from Vaunix
|
| The LPS-802 is a USB Phase Shifter that operates from 4 to 8 GHz. It has a 360-degree phase control range with one-degree increments and stores settings in internal memory, allowing it to power up in a specific phase state. The phase can be set from the easy to install and use GUI, configured from an uploaded phase profile or programmed using the provided API DLL. |
| |
Download Datasheet
Product Details | |
|
|
|
| Handheld Spectrum Analyzer from 9 kHz to 40 GHz | |
RF Spectrum Analyzer
from HAROGIC Technologies
|
| The PXN-400 from Harogic is a Handheld Spectrum Analyzer that covers a frequency range of 9 kHz to 40 GHz. It has an SHR architecture and 11-segment pre-selected filters. This spectrum analyzer operates in standard spectrum sweep (SWP), IQ streaming (IQS), (power detection analysis or zero span (DET) and real-time analysis (RTA) working modes. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Channel 50 W Power Amplifier from 1 to 6000 MHz | |
RF Amplifier
from Becker Nachrichtentechnik GmbH
|
| The AMP1600047-R from Becker Nachrichtentechnik is a Solid-State Power Amplifier operating from 1 to 6000 MHz. It delivers an output power of 50 W (47 dBm), which can be shared across both outputs or used independently at different frequency ranges. This amplifier includes an internal CW/pulse generator, with an optional second internal generator available for parallel operation. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by DigiKey | | Composite Core Power Inductors | | High-performance inductors suited for communications, computing, and automotive market segments. These compact components offer lower DCR, soft saturation and low overall losses, while allowing for pin-compatible replacements. Click here to learn more. | | | |
|
|
| Wi-Fi HaLow 802.11ah Module from 902 to 928 MHz | |
RF Module
from Murata
|
| The Type 2HK from Murata is a Wi-Fi HaLow 802.11ah Module that operates from 902 to 928 MHz. This module uses Wi-Fi HaLow technology to provide a data rate of up to 15 Mbps at distances of more than 2 km. It has a Tx power of +23 dBm and a bandwidth of 1, 2 or 4 MHz. This module requires a DC supply of 2.7 to 3.6 V and incorporates advanced power-saving features to significantly reduce power consumption and greatly extend the battery life of connected devices. |
| |
Download Datasheet
Product Details | |
|
|
|
| DECT NR+ and Cellular IoT System-in-Package with Built-in GNSS Support | |
Cellular Module
from Nordic Semiconductor
|
| The nRF9131 from Nordic Semiconductors is a DECT NR+ and Cellular IoT System-in-Package (SiP) designed to support DECT NR+ and cellular operations utilizing the same LTE stack as nRF9161. It is certified for global operations and simplifies traditional chipset-based designs by offering a smaller form factor, making the SiP ideal for high-volume cellular IoT applications. |
| |
Product Details | |
|
|
|
| 2.4/5 GHz Wi-Fi 6 + Bluetooth 5.4 LE Combo IC for IoT Applications | |
Wireless Chipset
from Infineon Technologies
|
| The CYW55512 from Infineon Technologies is a Dual-Band 2.4/5 GHz Wi-Fi 6 and Bluetooth Low Energy (BLE) 5.4 Combo IC. It offers a cost-effective balance of advanced Wi-Fi 6 and Bluetooth/BLE features with a power efficient design for IoT connectivity needs. This Wireless SoC has a 192 MHz Cortex CM33 core processor and supports OFDMA, MU-MIMO, TWT, BSS Coloring and DCM technologies. |
| |
Download Datasheet
Product Details | |
|
|
|
| Front-End Module for 5G NR, LTE and WCDMA Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58260-41 from Skyworks is a Front-End Module that supports 5G, 4G, 3G, LTE, WCDMA, HSDPA and HSUPA bands. It has PA blocks, input and output matching, a MIPI® standard digital control block, single-ended duplexers, antenna, band select switches, and a Low Noise Amplifier (LNA). |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Channel Receiver Front End Module from 1.7 to 2.7 GHz | |
Front End Module
from Qorvo
|
| The QPB9351 from Qorvo is a Receiver Front End Module that operates from 1.7 to 2.7 GHz. It has integrated first-stage low noise amplifiers (LNA) and digital step attenuators (DSA) with a second-stage LNA in a dual-channel configuration. This RX VGA SiP (receive variable gain amplifier system in package) requires a DC supply of +5 V and can be controlled via an SPI control interface. |
| |
Download Datasheet
Product Details | |
|
|
|
| Phase-Locked Voltage Controlled Oscillator from 10 MHz to 25 GHz | |
Voltage Controlled Oscillator
from Luff Research, an Ironwave Technologies Company
|
| The PLVCO-25000-10 from Luff Research is a Phase-Locked Voltage Controlled Oscillator (PLVCO) that operates from 10 MHz to 25 GHz. It provides an output power of more than +13 dBm. This X-Band PLVCO has spurious levels of -70 dBc and harmonics of -30 dBc. It has a single-phase locked loop (PLL) design that locks a VCO oscillator to either an external (10 MHz) or internal reference, thereby offering a simple architecture to realize the desired frequency. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 150 W Chip Termination from DC to 3 GHz | |
Termination
from Inmet by Spectrum Control
|
| The KACH375-375AZ-1000J from Spectrum Control is a Power-Film Chip Termination that operates from DC to 3 GHz. This termination can handle an average input power of 150 W and has a VSWR of less than 1.10:1. It has an AlN substrate and a thick film resistive element. Direct mounting of this termination to the PCB board eliminates the need for expensive mounting flanges and input tabs. It has large solderable surface areas on the bottom for higher power dissipation. This RoHS-compliant termination is available in a surface-mount package that measures 0.380 x 0.375 x 0.040 inches. |
| |
Download Datasheet
Product Details | |
|
|
|
| 35 W RF Termination from DC to 6 GHz | |
Termination
from MECA
|
| The 404-8 from MECA is an RF Termination that operates from DC to 6 GHz. It can handle an average power of 35 W and a peak power of 5 kW with a VSWR of less than 1.30:1. This 50-Ohm termination can operate over a temperature range of -55 to +85 °C. It is available in a package that measures ?1.62 x 2.67 inches and has an SMA female connector. |
| |
Download Datasheet
Product Details | |
|
|
|
| SMD Phase Locked Loop Synthesizer (PLL) from 1815 to 1875 MHz | |
Frequency Synthesizer
from Dynamic Engineers
|
| The PLL1414BQ-SS-1815MHz-1875MHz-A from Dynamic Engineers is a Phase Locked Loop Synthesizer (PLL) that operates from 1815 to 1875 MHz. It delivers an output power of 2 dBm and has a phase noise of -101 dBc/Hz. This 3-wire serial integer PLL has a step size of 50 KHz and a setting time of 10 ms. It requires a DC supply of 5 V and consumes less than 35 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Double-Ridged Ferrite Waveguide Circulator from 2 to 4 GHz | |
Waveguide Circulator
from Scientific Microwave Corporation
|
| The WRD200 from Scientific Microwave Corporation is a Double-Ridged Ferrite Waveguide Circulator that operates from 2 to 4 GHz. This circulator provides an isolation of 13.5 dB and has an insertion loss of 0.7 dB. It can handle a CW input power of 500 W and has a VSWR of 1.60:1. This circulator is available in a module and has 7/16 (female) connectors and WRD200 waveguide interfaces for input. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 W Bench Top Power Amplifier from 2 to 18 GHz | |
RF Amplifier
from AmpliTech, Inc.
|
| The APBT2018-01 from AmpliTech is a Power Amplifier (PA) that operates from 2 to 18 GHz. It delivers an output P1dB of 30 to 33 dBm with a gain of 47 dB and a noise figure of less than 4 dB. This CE-certified PA is manufactured using state-of-the-art pHEMT technology and is designed for laboratory testing purposes. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged, Surface Mount Broadband Conical Inductors | |
RF Inductor
from Coilcraft
|
| The BCR Series are conical inductors available in nine inductance values ranging from 0.22 to 8.0 uH. They have been designed specifically for broadband and high-frequency applications from 10 MHz to 40 GHz. The inductors are ideal for use in ultra-wideband bias tees, where the conical inductor provides the path for the DC bias injection or extraction while isolating the power source from the active device. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2 kW Pulsed Solid-state Power Amplifier from 4 to 8 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2083P-2KW from Exodus Advanced Communications is a Pulsed Solid-state Power Amplifier that operates from 4 to 8 GHz. It delivers a peak output power of 2 kW with a gain of more than 63 dB and has a pulse width of up to 100 us. This Class AB amplifier has a duty cycle of up to 6% and peak rise/fall times of less than 50 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Surface Mount Balun from 5 to 30 MHz | |
Balun
from HYPERLABS
|
| The HL9492 from HyperLabs is a Balun that operates from 5 to 30 MHz. This bidirectional balun can be used as a signal splitter or combiner and can operate in either single-ended mode or mixed mode. In the single-ended mode of operation, the output ports have 50 Ohm balanced outputs which are out of phase, and in the mixed mode, this balun provides a single output of 100 Ohm impedance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz Sine-wave GPS/GNSS-Disciplined Rubidium Oscillator | |
GPS/GNSS Disciplined Oscillator
from Safran Electronics & Defense
|
| The SRO-100 from Safran is a GPS/GNSS-Disciplined Rubidium Oscillator with an output frequency of 10 MHz (5 MHz, 15 MHz options available). It provides a sine-wave output with a phase noise of -145 dBc/Hz @1 kHz offset and has a frequency accuracy of 5 x 10-11. This oscillator utilizes SmarTiming+® technology and has spurious levels of better than -80 dBc and harmonics of -25 dBc. It requires a DC supply of 24 V and consumes less than 1.2 A of current in warm-up mode. The oscillator is suitable for telecom, navigation, broadcast, defense, and instrumentation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| XFdtd® Software for 3D Electromagnetic Simulation | |
Software
from Remcom
|
| XFdtd® 3D EM Simulation Software from Remcom provides engineers with powerful tools to shorten development time and release products to market sooner. XF is full-wave 3D electromagnetic modeling software for analyzing EM field simulation in complex, high-fidelity devices. The software includes a specialized FDTD solver which outpaces other methods in efficiency as the number of unknowns increases. |
| |
Download Datasheet
Product Details | |
|
|
|
| On-Wafer Probing Cable Assemblies from DC to 67 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityWafer Series from Maury Microwave are On-Wafer Probing Cable Assemblies that operate up to 67 GHz. They have an insertion loss of less than 1.79 dB/ft,a velocity of propagation of 74% and a shielding effectiveness of over 90 dB. These assemblies have a time delay of 1.34 ns/ft with a phase stability of up to ±14° and an amplitude stability of ±0.05 to ±0.20 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Multilayer LTCC Chip Baluns from 1500 to 5900 MHz | |
Balun
from Wurth Elektronik
|
| The WE-BAL 0805 Series from Wurth Elektronik consists of 1:2 baluns that operate over a frequency range of 1500 to 5900 MHz. These LTCC baluns have an unbalanced impedance of 50 Ohms and provide a balanced impedance of 100 Ohms. They have an insertion loss of less than 1.2 dB, a phase difference of 180°, and an amplitude imbalance of less than 2 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 W, Compact Block Up-Converter from 7.9 to 8.4 GHz | |
Block Up Converter
from Mission Microwave
|
| The MOAB-X-400 from Mission Microwave is an X-Band Block Up-Converter that provides output frequencies from 7.9 to 8.4 GHz. It delivers a rated output power of 56 dBm (~400 W) and a linear output power of 53 dBm (~200 W). This BUC shares a common electrical and control interface with the Ku-Band MOAB and is frequently used in a multi-band transportable gateway. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Cable Assemblies with Mini-FAKRA Connectors from DC to 9 GHz | |
RF Cable Assembly
from Amphenol RF
|
| The AUTOMATE Series from Amphenol RF are Cable Assemblies that operate from DC to 9 GHz. They have a Type A Mini-FAKRA quad-port jack to four SMA plugs or jacks and have breakout cables using the highly flexible TFC-302LL cable. These cable assemblies are available in cable lengths of 6 inches & 1 meter and have the automotive industry-standard snap-on interface on one end & a secure threaded coupling mechanism on the other end. |
| |
Download Datasheet
Product Details | |
|
