Featured Products this Week |
|
|
2.4/5.8/7.1 GHz Wi-Fi Dipole Antenna on Carrier for IoT Applications |
Antenna
from Taoglas
|
The FXM100.07.0060C from Taoglas is a Dipole Antenna that covers 2.4, 5.8, and 7.1 GHz bands and is compatible with Bluetooth, Wi-Fi 6 / 6E, and Wi-Fi 7 standards. This omnidirectional antenna is the industry’s first RF-45 connector-mounted antenna that eliminates its presence on the PCB, hence optimizing space and utilizing the connector as the antenna ground plane to enhance wireless performance. |
|
Download Datasheet
Product Details | |
|
|
|
Silicon SPDT Reflective Switch from 0.4 GHz to 8 GHz |
RF Switch
from Analog Devices
|
The ADRF5162 from Analog Devices is a Silicon SPDT Reflective Switch that operates from 0.4 GHz to 8 GHz. It has a switching speed of 800 ns, provides an isolation of 45 dB and an insertion loss of less than 0.8 dB. This reflective switch can handle an input average power of 45.5 dBm (~35.5 W), a peak input power of 50 dBm (100 W) and has a return loss of greater than 20 dB. |
|
Download Datasheet
Product Details | |
|
|
|
2.4 GHz Wi-Fi 7 (802.11be) Front End Module |
Front End Module
from Qorvo
|
The QPF4209 from Qorvo is a Wi-Fi 7 (802.11be) Front End Module that operates from 2412 to 2484 MHz. It consists of a 2.4 GHz power amplifier (PA), single pole two-throw switch (SP2T), coupler structure, and a bypassable low noise amplifier (LNA). This FEM also has an RF output coupler, a broad-range constant slope voltage logarithmic power detector for precise power control, and digital pre-distortion (DPD) for enhanced linear output power and throughput. |
|
Download Datasheet
Product Details | |
|
|
|
Negative Slope Gain Equalizer from 0.5 to 18 GHz |
Gain Equalizer
from Inmet by Spectrum Control
|
The EQ2301 from Inmet by Spectrum Control is a Negative Slope Gain Equalizer that operates from 0.5 to 18 GHz. It provides gain equalization slopes ranging from 3 to 35 dB and has a maximum insertion loss of 6 dB. This equalizer can handle an input power of up to 1 W and has a VSWR (input/output) of less than 1.80:1. It is available in a stainless-steel housing with gold-plated beryllium copper conductors and has SMA, TNC, and N-Type male/female connector options. |
|
Download Datasheet
Product Details | |
|
|
|
WR-62 Filter Isolator Assembly with Passband from 16.6 to 16.8 GHz |
Waveguide Filter
from Scientific Microwave Corporation
|
The SMC-250062 from Scientific Microwave Corporation is a Filter Isolator Assembly with a passband from 16.6 to 16.8 GHz. It integrates a passband Filter, a triple crossguide coupler, a pressure window, and an isolator. This assembly has a passband insertion loss of 1.2 dB and provides a rejection of 30 dB above and below the passband. It can handle a CW input power of up to 40 W and has a VSWR of 1.43:1 at the input and 1.10:1 at the output port. |
|
Download Datasheet
Product Details | |
|
|
|
WR-28 Waveguide Coupler from 26.5 to 40 GHz |
Waveguide Coupler
from Marki Microwave
|
The C10-2800WG from Marki Microwave is a Waveguide Coupler that operates from 26.5 to 40 GHz. This 10 dB coupler provides a directivity of more than 25 dB and has an insertion loss of 0.83 dB. It is built with high precision and then gold-plated for high corrosion resistance. This coupler is available in a module that measures 97.28 x 30.48 x 21.84 mm with WR-28 waveguide (UG-599/U) input and output interfaces. |
|
Download Datasheet
Product Details | |
|
|
|
|
6 dB Fixed Attenuator from DC to 110 GHz |
Fixed Attenuator
from HYPERLABS
|
The HL9429 from Hyperlabs is a Fixed Attenuator that operates from DC to 110 GHz. It provides an attenuation of 6 dB with an accuracy of ±1 dB. This ultra-broadband attenuator can handle a maximum input power of 24 dBm, has an amplitude match of ±0.5 dB, and a phase match of 5°. It is available in a module that measures 1.141 x 0.377 x 0.377 inches with 1.0 mm female/male connectors. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Low-Power LTE-M/NB-IoT/IoT-NTN Satellite/GNSS Module |
Cellular Module
from u-blox AG
|
The SARA-S528NM10 from u-blox is an LTE-M/NB-IoT/IoT-NTN Satellite/GNSS Module that is designed to provide global connectivity via LTE-M, NB-IoT, and satellite networks with a single module. It also has the u-blox M10 GNSS chipset and complies with 3GPP Release 17 NTN standards. This module also supports cellular LTE Cat-M1 and LTE Cat NB2 technologies based on 3GPP Release 14/15/17 features that are relevant for IoT applications. |
|
Download Datasheet
Product Details | |
|
|
|
2.4 GHz Bluetooth 5.4 Low Energy Module for IoT Applications |
RF Module
from Insight SiP
|
The ISP2454 from Insight SiP is a 2.4 GHz Bluetooth 5.4 Low Energy Module that supports Bluetooth Mesh, Thread, and Matter protocols. This module has an 128 MHz Arm Cortex-M33 processor and an nRF54L15 Nordic chip (22 nm process node) with 1.5 MB non-volatile memory and 256 KB RAM. It delivers a data rate of up to 4 Mbps with a Tx power of +8 dBm and has an Rx sensitivity of -98 dBm. |
|
Download Datasheet
Product Details | |
|
|
|
3GPP Release 13-Compliant Low-Power LTE Cat M1/NB-IoT Module |
Cellular Module
from Murata
|
The LBAD0XX1SC-151 from Murata is an LTE Cat M1/NB-IoT Module that has been engineered to meet the industry requirements with features that prioritize very small size and low power consumption. It complies with 3GPP Release 13 standards (Release 14 for software upgrade) and supports both LTE Cat M1 and LTE NB1 technologies in a compact package, making it suitable for applications where space is limited. |
|
Download Datasheet
Product Details | |
|
|
|
RF Adapters from DC to 40 GHz for Laboratory Applications |
Between Series RF Adapter
from Maury Microwave
|
The TE Series (Test Essential™ Lab Adapters) from Maury Microwave are Between Series RF Adapters that operate up to 40 GHz. They are designed for daily use in microwave/RF labs and production facilities and offer one of the industry’s best price/performance ratios. These adapters deliver excellent electrical performance, repeatable mating, and high reliability in a rugged construction. |
|
Download Datasheet
Product Details | |
|
|
|
10 MHz High-Stability OCXO with Sinewave Output |
OCXO
from Dynamic Engineers
|
The OCXO3307CV-10MHz-A-V from Dynamic Engineers is an OCXO that operates at 10 MHz. It produces a sinewave output of more than +7 dBm and a frequency stability of ±5 ppb across an operating temperature range of -40°C to +85°C. This OCXO has a G-sensitivity of less than ±1.0 ppb/G and an SSB phase noise of -167 dBc/Hz (@10 kHz offset). |
|
Download Datasheet
Product Details | |
|
|
|
10 MHz GPS Disciplined Oscillators for Navigation and Timing Applications |
GPS/GNSS Disciplined Oscillator
from Abracon LLC
|
The ABCM-60 Series from Abracon are GPS Disciplined Oscillators that operate at 10 MHz. These oscillators merge the stability of an OCXO with the precise timing signals from GNSS satellites to provide highly accurate and reliable timing. They include a GNSS receiver for precise time information, a lock pin indicator, and holdover operation to maintain accuracy when GNSS signals are unavailable, with outputs including a 10 MHz clock signal and a 1PPS signal. |
|
Download Datasheet
Product Details | |
|
|
|
50 W, Class-AB GaN Solid-State Power Amplifier from 2 to 4 GHz |
RF Amplifier
from RFTR Electronics
|
The JA05004000P47 from RFTR Electronics is a Solid-State Power Amplifier that operates from 0.5 to 4 GHz. It delivers an output power of 50 W with a gain of 47 dB and a flatness of ± 4 dB. This Class AB amplifier utilizes GaN-on-SiC transistors and is suitable for CW and pulsed waveforms. With a fast switching time of less than 5 μs (ON/OFF), this amplifier ensures power saving during pulsed applications. |
|
Download Datasheet
Product Details | |
|
|
|
EMI Test Receiver from 1 Hz to 44 GHz for EMC Compliance Testing |
EMI Receiver
from Keysight Technologies
|
The N9048B from Keysight Technologies is a standards-compliant EMI test receiver equipped with an RF pre-selector and LNA designs. It has been developed to shorten the overall test time and easily perform gapless signal capture and analysis with real-time scan (RTS) capabilities. This EMI Test Receiver and diagnostic signal analyzer operate from 1 Hz to 44 GHz. |
|
Download Datasheet
Product Details | |
|
|
|
Smart Noise Sources from 10 MHz to 110 GHz |
Noise Source
from Rohde & Schwarz
|
The R&S FS-SNS from Rohde & Schwarz are Smart Noise Sources that operate from 10 MHz to 110 GHz (18 GHz, 26 GHz, 40 GHz, 55 GHz, 67 GHz, 90 GHz or 110 GHz options available). They enable simple noise figure and gain measurements by automatically loading all necessary setup parameters and taking the environmental temperature into account. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
64 Gbps Differential Dual DP3T Relay with Loopback from DC to 20 GHz |
RF Switch
from Menlo Micro
|
The MM5622 from Menlo Micro is a Differential Dual DP3T Relay that operates from DC to 20 GHz. It is based on Menlo’s Ideal Switch® technology and can operate at 64 Gbps with a bandwidth of 20 GHz for high-performance applications. This relay fully integrates the switch driver and charge pump, along with decoupling capacitors for significant board footprint reduction in high-volume production test solutions. |
|
Download Datasheet
Product Details | |
|
|
|
400 MHz Hermetically-Sealed Voltage-Controlled SAW Oscillator |
Voltage Controlled SAW Oscillator
from Microchip Technology
|
The 101765-400-B from Microchip Technology is a Voltage-Controlled SAW Oscillator (VCSO) that operates at 400 MHz. This SAW oscillator is a high-Q Quartz device that enables the circuit to achieve very low phase noise in a rugged package. It provides Sinewave output waveforms with a phase noise of 157 dBc/Hz (at 10 kHz offset) and a frequency stability of ±70 ppm. |
|
Download Datasheet
Product Details | |
|
|
|
90° Hybrid Coupler from 700 to 1000 MHz for Wireless Applications |
90 Degree Hybrid Coupler
from Johanson Technology
|
The 0850HC47A0300001E from Johanson Technology is a 90° Hybrid Coupler that operates from 700 to 1000 MHz. This 3 dB coupler provides an isolation of more than 23 dB and has an insertion loss of less than 0.14 dB. It can handle a CW input power of up to 300 W and has a return loss of 23 dB. This hybrid coupler has an amplitude balance of up to 0.3 dB and a phase balance of 90°. |
|
Download Datasheet
Product Details | |
|
|
|
Powdered Iron-Based Wireless Charging Transmit and Receive Coils |
Wireless Charging Coil
from Vishay
|
The IW Series from Vishay are Wireless Charging Transmit and Receive Coils with inductance values of 6.3 µH/19.6 µH/24 µH. They are optimized for high humidity conditions up to 90% relative humidity (RH). These charging coils incorporate powdered-iron material that makes them immune to temperature fluctuations and sharp inductance drop-off behavior, as observed in ferrite-based solutions. |
|
Download Datasheet
Product Details | |
|
|
|
Solderless PCB SMA-Jack Coaxial Connectors from DC to 27 GHz |
RF Connector
from Wurth Elektronik
|
The WR-SMA from Wurth Elektronik are SMA-jack, Solderless PCB connectors that operate from DC to 27 GHz. They have a withstanding voltage of either 650 V or 1000 V(RMS), insulation resistance of more than 5000 Mega ohms, and a VSWR of less than 1.30:1. These 50 Ohm connectors have an insertion loss of less than 0.26 dB and a center contact resistance of 3 mOhms. |
|
Download Datasheet
Product Details | |
|
|
|
12-Port 4x4 MIMO Base Station Antenna from 694 to 2690 MHz |
Base Station Antenna
from Kaelus
|
The S6IHEU06 from Kaelus is a 12-Port Base Station Antenna that operates from 694-960 MHz, 1695-2690 MHz, and 1427-2690 MHz. This dual-slant ±45°-polarized antenna provides a gain of more than 16 dBi and has a VSWR of less than 1.5:1. It has an azimuth beamwidth of 16.1°, an elevation beamwidth of 69.9°, and an electrical downtilt from 2° to 12°. |
|
Download Datasheet
Product Details | |
|
|
|
9-Port 4x4 MIMO Low-Profile 5G Antennas for Transportation Applications |
Antenna
from Excelwave
|
The EAM9-4C4W1G-xx Series from Excelwave are 9-Port Low-Profile 5G Antennas that operate from 617-960 MHz and 1690-6000 MHz. These vertically/RHCP-polarized antennas provide a gain of up to 8 dBi and have a VSWR of 2:1. They are designed for transit applications and incorporate low-profile heavy-duty radome assembly that meets the requirements for a variety of vehicles, including cars, buses, trucks, trams, and trains. |
|
Download Datasheet
Product Details | |
|