PREV 31 Aug, 2022 NEXT

New RF and Microwave Products this Week

31 Aug, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 31 Aug, 2022
 
Sponsored by PCB Directory
 
 
New RF and Microwave Products this Week
Voltage Controlled Oscillator
Voltage Controlled Oscillator from 4595 to 4598 MHz
Voltage Controlled Oscillator  from Z-COMM

The SMV4596L-LF from Z-COMM is a Voltage Controlled Oscillator (VCO) with a frequency from 4595 to 4598 MHz. It delivers an output power from -3 to 1 dBm into a 50-Ohm load and has a phase noise of -81 dBc/Hz at a 10 kHz offset. This VCO is based on an efficient oscillator design to cover the operating frequency range with a tuning voltage from 0 to 2.5 V.
Download Datasheet Product Details
Power Sensor
Real-Time Peak USB Power Sensors from 50 MHz to 40 GHz
Power Sensor  from Boonton

The RTP5000 Series of USB Power Sensors from Boonton are Real-Time peak power sensors that operate from 50 MHz to 40 GHz (available in 6 GHz, 18 GHz and 40 GHz configurations). They have a dynamic range from -60 dBm to +20 dBm with a measurement rate of 100,000 measurements per second, with no gaps in signal acquisition and zero measurement latency.
Download Datasheet Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzer from 16 kHz to 14/26.5 GHz
RF Spectrum Analyzer  from Tektronix, Inc.

The RSA7100B from Tektronix is a Spectrum Analyzer that operates from 16 kHz to 14/26.5 GHz. It offers real-time spectrum analysis with a bandwidth of up to 800 MHz and has a phase noise of -134 dBc/Hz @ 10 kHz offset (1 GHz operating frequency). The analyzer separates the RF acquisitions from the compute engine which allows a graphics processor to be used in place of previously-required FPGA designs for real-time processing.
Download Datasheet Product Details
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 1 MHz to 6 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The R60 is a single port USB-powered VNA (Reflectometer) capable of measuring S11 from 1 MHz to 6.0 GHz. It can be operated with any Windows PC or laptop using a USB cable. The R60 provides a wide variety of analysis capabilities, including S11, time-domain with gating and DTF measurements. It can be used for antenna matching, cable and connector quality control, antenna production quality assurance, field testing and troubleshooting of cables, material measurements, and other applications.
Download Datasheet Product Details
RF Variable Attenuator
95 dB USB Controlled Programmable Attenuator from 200 to 8000 MHz
RF Variable Attenuator  from JFW Industries

The 50P-2111 from JFW Industries is a Bi-Directional, Solid-State Programmable Attenuator that operates from 200 to 8000 MHz. It has an attenuation range from 0 to 95 dB with a step size of 1 dB (1, 2, 4, 8, 16 and 32 dB step options available). The attenuator has an insertion loss of less than 7 dB and a typical switching speed of 0.7 µs.
Download Datasheet Product Details
Featured Interview
Featured Interview
Interview with Tom Scanlon from Farran
everything RF recently interviewed Tom Scanlon, the Director of Sales and Marketing at Farran. This Irish company has been developing innovative millimeter-wave solutions for more than forty years. Their standard and bespoke systems, and subsystems, are used in Test & Measurement, Radar & Imaging, Communications, Research, and Aerospace industries internationally. Click here to read the interview.
RF Switch
2-Way SPDT Smart Switch from 850 to 2150 MHz
RF Switch  from ETL Systems

The CST-POE-SW02-1059 from ETL systems is a 2-Way SPDT Smart Switch that operates from 850 to 2150 MHz. It can handle an input power of up to 10 dBm (~10 mW), has an insertion loss of 3 dB, and provides isolation of more than 65 dB. The switch can be controlled via a web browser (via Ethernet) and has SNMP & TCP/IP interfaces. It is PoE 802.3af compliant, requires a DC supply of 48 V, and consumes less than 6 W of power.
Download Datasheet Product Details
Power Divider
2-Way Power Divider from 698 MHz to 2.7 GHz
Power Divider  from MECA

The 802-12-1.700V from MECA is a 2-Way Power Divider/Combiner that operates from 698 MHz to 2.7 GHz. It can handle an input power of 40 W, has an insertion loss of less than 0.5 dB, and provides isolation of more than 22 dB. The power divider has an amplitude balance of less than 0.2 dB and a phase balance of better than 3°. It is available in a module with SMA-female connectors.
Download Datasheet Product Details
RF & Microwave Circulator
Coaxial Circulators from 10 MHz to 20 GHz
RF & Microwave Circulator  from UIY Inc.

The coaxial circulators from UIY operate from 10 MHz to 20 GHz. They have an insertion loss of below 1.2 dB, isolation of over 14 dB, and can handle up to 600 watts of forward power. These circulators are available in a module with N-type / SMA connectors as standard and can also be customized on order. They are suitable for Military, Space & Commercial applications.
Download Datasheet Product Details
RF Shielded Test Enclosure
Rackmount RF Shield Box for Wireless Device Testing up to 12 GHz
RF Shielded Test Enclosure  from RF Electronics

The HDRF-1724 from RF Electronics is an RF Shield Box that is designed for WLAN and wireless device testing up to 12 GHz. It has thick RF absorbing foam that deadens standing waves and reflections and provides high isolation. This shield box is equipped with shielded power filters for power connection in the box while still blocking all wireless signals. It has a standard 24” rack mount design and is ideal for Rack Based Vertical test platforms.
Download Datasheet Product Details
RF Amplifier
250 W Solid-State Power Amplifier from 18 to 26.5 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP4065B-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 26.5 GHz. It delivers a CW/pulsed saturated output power of 250 W with a power gain of more than 53 dB. This Class A/AB linear design amplifier is equipped with built-in protection circuits to prevent short-circuit-related damages and provides extensive monitoring of parameters such as VSWR, power (Watts and dBm), voltage, current, and temperature.
Download Datasheet Product Details
Sponsored by EMC Directory
 
 
RF Amplifier
40 kW Scalable GaN SSPA System from 1 to 2 GHz
RF Amplifier  from Empower RF

The 2237 from Empower RF Systems is a Solid-State Class AB Pulsed Power Amplifier System that operates from 1 to 2 GHz. The system can be scaled up in power by using multiple amplifiers in a chassis. Each amplifier “building block” includes an integrated power supply in its 2U chassis. The power combining feature with hot-swapping provides an affordable upgrade path for mission-critical applications.
Download Datasheet Product Details
Front End Module
Dual-Channel RF Front-End Module from 2.0 to 4.2 GHz
Front End Module  from Tagore Technology

The TSL8329M from Tagore Technology is a Dual-Channel, Integrated Front-End Module that operates from 2.0 to 4.2 GHz. It has a cascading, two-stage Low Noise Amplifier (LNA) and a GaN based SPDT switch. In high gain mode, the cascaded two-stage LNA and switch have noise figure of 1 dB and provide gain of 32 dB at 3.6 GHz.
Download Datasheet Product Details
RF Module
2.4 GHz Wirepas Radio Module for IoT Applications
RF Module  from Wurth Elektronik

The Thetis-I from Würth Elektronik is a 2.4 GHz Radio Module that supports the Wirepas routing mesh communication protocol. It has a line of sight range of 400 m and an RF bitrate of up to 1 Mbps. The module delivers a Tx power of 6 dBm and has an Rx sensitivity of up to -92 dBm. It requires a DC supply of 1.8-3.6 V, consumes 18.9 mA of current in Tx mode, 7.7 mA in Rx mode, and 3.16 µA in sleep mode.
Download Datasheet Product Details
RF Cable Assembly
Flexible Cable Assembly from DC to 26 GHz for Space Applications
RF Cable Assembly  from Huber+Suhner

The MINI250H from Huber+Suhner is a Flexible Cable Assembly that operates from DC to 26 GHz. It is designed for internal point-to-point interconnections between RF modules within systems and allows bending immediately behind the connectors, without compromising on signal strength or stability.
Download Datasheet Product Details
RF Amplifier
100 W GaN Power Amplifier Module from 1.2 to 1.4 GHz
RF Amplifier  from Qorvo

The QPA2511 from Qorvo is a 2-Stage Power Amplifier Module that operates from 1.2 to 1.4 GHz. It delivers an output of 100 W with a large signal gain of 32 dB and a drain efficiency of 69%. This PAM is manufactured using GaN-on-SiC HEMT technology that ensures optimal performance and high reliability. It requires a DC supply of 50 V and has a DC-blocking capacitor at the input port.
Download Datasheet Product Details
GNSS Simulator
Multi-Constellation, Multi-Frequency GNSS Simulator
GNSS Simulator  from IFEN

The NCS NOVA from IFEN is a GNSS Simulator that supports all global (GNSS) and regional satellite navigation systems (RNSS) as well as satellite-based augmentation systems (SBAS). It has 160 signal channels available (per chassis) with each signal channel having additional multipath channels (controlled by a software). The user may select which signals are simulated and the allocation of channels to each signal, for each test scenario.
Download Datasheet Product Details
Data Link
Aviation-Grade, Miniature Data Link Radio from 902 to 928 MHz
Data Link  from uAvionix Corporation

The UAX-90045-01 from uAvionix Corporation is a Beyond Visual Line-of-Sight (BVLOS) Miniature Data Link Radio that operates from 902 to 928 MHz. It has been specifically designed for long range Unmanned Aircraft Systems (UAS) Command and Control (C2) data links. This aviation-grade data link radio does not use a dedicated aviation band, thereby making FAA permission-to-transmit requirement unnecessary.
Download Datasheet Product Details
Front End Module
802.11ax (Wi-Fi 6) Front-End Module from 5 to 7 GHz
Front End Module  from pSemi, A Murata Company

The PE565211 from PSemi is an 802.11ax Wi-Fi 6 Front-End Module that operates from 5150 to 7150 MHz. It is a high-performance module that enables full and efficient integration by combining intelligent capabilities of pSemi’s patented UltraCMOS technology, an advanced form of Silicon-on-Insulator (SOI) technology that offers the performance of GaAs with the economy and integration of conventional CMOS.
Download Datasheet Product Details
RF Amplifier
GaAs pHEMT MMIC Low Noise Amplifier from 5 to 20 GHz
RF Amplifier  from Analog Devices

The ADL8105 from Analog Devices is a GaAs pHEMT MMIC Low Noise Amplifier that operates from 5 to 20 GHz. It delivers a saturated output power of 20.5 dB more than 24.5 dB gain and has a noise figure of 1.8 dB (12 – 17 GHz). The LNA requires a DC supply of 5 V and consumes 90 mA of current. It is available in an 8-lead LFCSP package that measures 2.00 x 2.00 x 0.85 mm with inputs and outputs that are internally matched to 50-ohms.
Download Datasheet Product Details
SATCOM Transceiver
X-Band GaN Transceiver from 7.25 to 8.4 GHz for Satellite Applications
SATCOM Transceiver  from Communications & Power Industries

The TR61 from Communications and Power Industries is an X-Band GaN Transceiver with a Tx frequency from 7.9 to 8.4 GHz and an Rx frequency from 7.25 to 7.75 GHz. It is based on a fully integrated solution that combines an orthomode transducer (OMT), Tx filter, GaN power amplifier, block-up converter (BUC), Rx filter, Tx/Rx local oscillators, low noise block (LNB), power supply, and other control components in a small, lightweight package.
Download Datasheet Product Details
SATCOM Antenna
Electronically Steerable Ka-Band Omnidirectional Antenna for SATCOM
SATCOM Antenna  from Get SAT Ltd

The Sling Blade from Get SAT is an Electronically Steerable Antenna (ESA) that operates in the Ka-band with a Tx frequency range of 27.5-31 GHz and an Rx frequency range of 17.7-21.2 GHz. This antenna has an electronically configurable circular polarization and can deliver an EIRP of up to 46 dBW. It has an azimuthal beamwidth from 360° (omni-directional) and an electronically steerable elevation beamwidth from 10 to 90°.
Download Datasheet Product Details
RF Amplifier
3.5 W GaN Power Amplifier MMIC from 47 to 52 GHz
RF Amplifier  from Nxbeam Inc

The NPA4010-DE from Nxbeam is a Power Amplifier MMIC that operates in the V-band from 47 to 52 GHz. It delivers a saturated output power of 3.5 W with a linear gain of 24 dB and a PAE of 23%. This amplifier has been developed on a 0.15um GaN HEMT on SiC process and has an RF input and output match to 50 Ohm with DC blocking capacitors for easy system integration and fully passivated for reliable operation.
Download Datasheet Product Details
RF Mixer
Image Reject Passive Diode Mixer MMIC from 15 to 45 GHz
RF Mixer  from MACOM

The MAMX-011043 from MACOM is an Image-Reject passive Diode Mixer MMIC with a LO/RF frequency from 15 to 45 GHz and an IF frequency from DC to 10 GHz. It provides image rejection of up to 20 dBc and has a conversion loss of less than 10.5 dB. The mixer has an amplitude imbalance of ±1 dB and a phase imbalance of ±10°.
Download Datasheet Product Details
Antenna
High-Efficiency Omnidirectional IoT Antennas from 700 to 3000 MHz
Antenna  from RangeAnt

The MAX Series from RangeAnt are IoT Antennas that operate from 700 to 3000 MHz. They have an omnidirectional radiation pattern and provide a peak gain of 3 dBi. The antennas have a free-space efficiency of 80% with a VSWR of less than 2:1 across the bands. The high efficiency of the antennas allows them to deliver greater range for the available transmitter power, and improved receiver performance.
Download Datasheet Product Details
Antenna
Adhesive-Mount 2.4 GHz Flexible Dipole Antennas
Antenna  from Linx Technologies

The ANT-2.4-FPC-LH Series from Linx Technologies are Flexible Printed Circuit (FPC) Dipole Antennas that operate in the 2.4 GHz Band. These linearly polarized antennas have an omnidirectional radiation pattern and provide up to 6 dBi of gain with an efficiency of 81%. They can handle an input power of up to 2 W and have a VSWR of less than 1.4:1.
Download Datasheet Product Details
RFID Tag
Semi-Passive NFC/RAIN RFID Temperature and Humidity Logger Tag
RFID Tag  from CAEN RFID

The qLog (RT0013) from CAEN RFID is a semi-passive NFC/RAIN RFID Temperature and Humidity Logger Tag that monitors temperature and humidity. It combines a high-resolution sensor, lots of memory and NFC/RAIN RFID interfaces to realize effective track and trace solutions for the cold chain.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Indsutry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]