PREV 14 Sept, 2022 NEXT

New RF and Microwave Products this Week

14 Sept, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 14 Sept, 2022
 
Sponsored by Digi-Key
 
 
New RF and Microwave Products this Week
RF Spectrum Recording and Playback System
Remote Spectrum Receiver with I/Q Recorder from 9 kHz to 18 GHz
RF Spectrum Recording and Playback System  from CRFS

The RFeye SenS Remote from CRFS is a Remote Spectrum Receiver with I/Q Recorder that operates from 9 kHz to 18 GHz. It combines the RF and edge-processing capabilities of the RFeye Node 100-18 together with the high-speed recording feature of the RFeye SenS family. This recorder uses a powerful COTS processor for secure rack-mounted recording and can be positioned in fixed, unmanned locations such as on a mast or tower.
Download Datasheet Product Details
Power Sensor
Real-Time Peak USB Power Sensors from 50 MHz to 40 GHz
Power Sensor  from Boonton

The RTP5000 Series of USB Power Sensors from Boonton are Real-Time peak power sensors that operate from 50 MHz to 40 GHz (available in 6 GHz, 18 GHz and 40 GHz configurations). They have a dynamic range from -60 dBm to +20 dBm with a measurement speed of 100,000 points per second, with no gaps in signal acquisition and zero measurement latency.
Download Datasheet Product Details
Vector Network Analyzer
2-Port USB Vector Network Analyzer from 100 kHz to 9 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The C2209 from Copper Mountain Technologies is a 2-port modular vector network analyzer that operates from 100 kHz to 9 GHz. The VNA can measure all S parameters S11, S21, S12, S44 and can be controlled using any Windows PC or laptop. It has a dynamic range of up to 162 dB (1Hz IF BW), directivity of 46 dB and sweep speeds of as low as 10 microseconds per point.
Download Datasheet Product Details
RF Amplifier
0.5 W pHEMT MMIC Power Amplifier from 20 to 54 GHz
RF Amplifier  from Analog Devices

The ADPA7009-2 from Analog Devices is a GaAs pHEMT MMIC Power Amplifier that operates from 20 to 54 GHz. It delivers a saturated output power of 29 dBm (0.5 W) with a gain of up to 17.5 dB. This amplifier has an integrated temperature-compensated, on-chip power detector along with other external passive components like AC coupling capacitors and power supply decoupling capacitors.
Download Datasheet Product Details
RF Up-down Converter
60 GHz Frequency Converter for Simulation of In-Cabin Automotive Radar Sensors
RF Up-down Converter  from dSPACE

The DARTS HBC-7066V from dSPACE is a Frequency Converter that enables radar target simulation in the V-band from 57 to 64 GHz. It is suitable for in-cabin applications in level 3 automated driving which requires monitoring of the driver and passengers in the cabin. For testing radars operating in V-band, the DARTS HBC-7066V converts the radar signal from the 60 GHz radio frequency first to an intermediate frequency that is processed by dSPACE Automotive radar target simulator (DARTS) and then converts it back to the 60 GHz radio frequency to be received by the radar under test.
Download Datasheet Product Details
RF Amplifier
8 W GaN-on SiC Power Amplifier from 2620 to 2690 MHz
RF Amplifier  from RFHIC

The RTH26008S-30 from RFHIC is a Hybrid Power Amplifier that operates from 2620 to 2690 MHz. It delivers an output power of 8 W with a gain of 29 dB and has a PAE of 45%. This amplifier is fabricated using an advanced high power density Gallium Nitride (GaN) semiconductor process and is integrated with asymmetric Doherty configurations for higher power-added efficiency.
Download Datasheet Product Details
Sponsored by Digi-Key
PFB Series
Power Line Communication (PLC) Transformers - PFB Series
Bourns Magnetics Product Line’s PFB series PLC transformers are suited for smart cities and homes needing intelligent control technology and energy-saving solutions. Click here to learn more.
RF Amplifier
4 kW Pulsed Solid-State Power Amplifier from 8 to 12 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP4022DBP-4KW from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 8 to 10 GHz (Band A) and 10 to 12 GHz (Band B). It delivers a pulsed output power of 4 kW with a gain of more than 66 dB. This power amplifier has a pulse width of up to 100 µs and a maximum duty cycle of 6%.
Download Datasheet Product Details
RF Amplifier
10 W GaN Power Amplifier MMIC from 0.45 to 6 GHz
RF Amplifier  from Wolfspeed

The CMPA0560008S from Wolfspeed is a Power Amplifier MMIC that operates from 0.45 to 6 GHz. It delivers a CW output power of 10 W (40 dBm) with a large signal gain of 12 dB and power-added efficiency of up to 60%. This amplifier is based on a 0.15um GaN-on-SiC production process. It requires a DC supply of 28 V and consumes 220 mA of current.
Download Datasheet Product Details
Digital to Analog Converter
Space-Grade 12-Bit Dual-Channel DAC with 25 GHz Output Bandwidth
Digital to Analog Converter  from Teledyne e2v

The EV12DD700 from Teledyne e2v Semiconductors is a 12-Bit Dual-Channel Digital to Analog Converter (DAC) with an output bandwidth of 25 GHz. It has a conversion rate of up to 12 GSps and embeds digital features like interpolation, Digital Up Conversion (DUC), and Direct Digital Synthesis (DDS) to reduce the input data rate.
Download Datasheet Product Details
RF Shielded Test Enclosure
Bench-Top RF Shield Box from 20 MHz to 12 GHz for Wi-Fi/Cellular Devices
RF Shielded Test Enclosure  from RF Electronics

The HDRF-1970-V from RF Electronics is an RF Shield Box that operates from 20 MHz to 12 GHz. It has a thick RF absorbing foam that deadens standing waves and reflections to provide more than 90 dB of isolation. The test box has shielded power filters for powering devices placed inside the box while blocking all wireless signals. It is available in a rugged bench-top enclosure with internal dimensions of 565 x 415 x 565 mm and 4 cut-off waveguide air vents (two at the front door, two at the rear side wall).
Download Datasheet Product Details
Wireless SoC
Bluetooth 5.3 Dual Mode Radio for LE Audio Applications
Wireless SoC  from Qualcomm

The S5 Sound Platform from Qualcomm is a Bluetooth LE Audio Module that is based on a Bluetooth 5.3 dual-mode radio. It supports Snapdragon Sound technology to deliver premium audio in all environments even where there could be interference from many other devices. This module uses third-generation Qualcomm Adaptive Active Noise Cancellation (ANC) that seamlessly adapts to wind noise, and transparency depending on the users' environment and prevents howling noises.
Download Datasheet Product Details
Cellular Module
2.8 Gbps Sub-6 GHz 5G-NR (NSA/SA)/LTE-FDD/LTE-TDD/HSPA+ Module
Cellular Module  from SIMCom

The SIM8260C-M2 from SIMCom is a Sub-6 GHz Multi-Band Cellular Module that supports Release 16 5G NR (NSA/SA), LTE-FDD/LTE-TDD and HSPA+. It delivers a downlink data rate of up to 2.8 Gbps (5G-NSA) and an uplink data rate of up to 900 Mbps (5G-SA). This module can be controlled via SIM (1.8/2.95 V), PCIe, USB 3.1, GPIO, PCM and I2C interfaces.
Download Datasheet Product Details
Sponsored by Digi-Key
Nordic Thingy
Nordic Thingy:53 IoT Prototyping Platform
With integrated sensors for motion, sound, light, and environmental factors, it is the perfect platform for building proofs of concept and developing prototypes quickly. It supports a wide range of wireless protocols, including Bluetooth® LE, Bluetooth mesh, Thread, Zigbee®, and Matter. Click here to learn more.
Band Pass Filter
mmWave Bandpass Filter with Passband from 27.5 to 29.5 GHz
Band Pass Filter  from Johanson Technology

The 28R0BP39A2000 from Johanson Technology is a Bandpass Filter with a passband from 27.5 to 29.5 GHz. It can CW input power of up to 1 W, has a passband insertion loss of less than 2.3 dB, and provides more than 20 dB of attenuation above and below the passband. This filter is available in a surface-mount ceramic package that measures 2.50 x 2.00 x 0.90 mm.
Download Datasheet Product Details
Voltage Controlled Oscillator
Voltage-Controlled Oscillator from 6810 to 6860 MHz
Voltage Controlled Oscillator  from Z-COMM

The CRO6835X3-LF from Z-Communications is a Voltage-Controlled Oscillator that operates from 6810 to 6860 MHz. It delivers an output power of up to 4 dBm with a phase noise of -105 dBc/Hz @ 10 kHz offset. This oscillator has a DC tuning voltage from 0.5 to 8 V and has a tuning sensitivity of 15 MHz/V. It requires a DC supply of 5 V and consumes less than 30 mA of current.
Download Datasheet Product Details
Between Series RF Adapter
Triaxial Adapters with an Additional Conducting and Insulating Layer
Between Series RF Adapter  from IntelliConnect

The Triaxial Adapters from Intelliconnect are designed for use in medical industries for radiation detection equipment and medical imaging. They use a non-constant impedance design with an isolated ground and are readily available in BNC, TNC, and other configurations. These adaptors are also used in broadcast and camera applications where reduced ‘noise’ or interference levels are required.
Download Datasheet Product Details
Power Divider
2-Way Surface-Mount Power Divider from 2 to 20 GHz
Power Divider  from MACOM

The MAPD-011062 from MACOM is a 2-Way Power Divider that operates from 2 to 20 GHz. It can handle an input power of up to 3 W, has an insertion loss of less than 2.75 dB, and provides more than 15 dB of isolation. This power divider has an amplitude balance of 0.2 dB and a phase balance of 2°.
Download Datasheet Product Details
RF Variable Attenuator
Digitally Controlled RF Attenuator from 50 MHz to 18 GHz
RF Variable Attenuator  from G.T. Microwave, Inc.

The A3G-69N-3JQ from GT Microwave is a Digitally Controlled GaAs Attenuator that operates from 50 MHz to 18 GHz. It provides has an attenuation range of 32 dB (±1.25 dB flatness) in 0.125 dB steps and has an insertion loss of 4.75 dB. The attenuator is digitally controlled via 8-bit TTL compatible binary logic and has a switching speed of less than 1 µs.
Download Datasheet Product Details
Power Divider
MIL-Qualified 3-Way GNSS Splitter from 1.1 to 1.7 GHz
Power Divider  from GPS Networking

The MIL-NLDCBS1x3 from GPS Networking is a 3-Way Military Qualified Networked Loaded DC Blocked Splitter that operates from 1.1 to 1.7 GHz. It covers all major GNSS frequency bands, has excellent gain flatness, an insertion loss of less than 9.1 dB and provides 15 dB of isolation. The power splitter can accept any DC voltage from 8 to 32 V which is then regulated down to 5 V to power the GPS Antenna.
Download Datasheet Product Details
RF Up-down Converter
mmWave Up/Down Converter IC from 24 to 30 GHz for 5G Applications
RF Up-down Converter  from Anokiwave

The AWMF-0188 from Anokiwave is an Up/Down Converter IC that operates from 24 to 30 GHz covering the n258, n257, and n261 3GPP 5G bands. It supports Tx single-sideband up-conversion and Rx image-reject down-conversion functionality. This converter has 4 on-chip frequency multipliers that simplify board-level integration with external PLLs.
Download Datasheet Product Details
Signal Generator
Benchtop RF Signal Generator from 9 kHz to 2.1 GHz
Signal Generator  from RIGOL Technologies

The DSG821 from RIGOL Technologies is a Benchtop RF Signal Generator that operates from 9 kHz to 2.1 GHz with a frequency resolution of 0.01 Hz. It performs step sweep (equally spaced level steps) & list sweep (list with arbitrary level steps) with a sweep time from 20 ms to 100 s.
Download Datasheet Product Details
RF Monitoring Receiver
Remote Spectrum Monitor from 9kHz to 9/20/43.5 GHz
RF Monitoring Receiver  from Anritsu

The MS27201A from Anritsu is a Remote Spectrum Monitor that operates from 9 kHz to 9/20/43.5 GHz covering all standard LMR, cellular, satellite, and defense electronic bands. It has an analysis bandwidth of 110 MHz and a resolution bandwidth from 1 Hz to 10 MHz with a phase noise of -110dBc/Hz. This spectrum monitor has a measurement range from -164 dBm to +30 dBm and a dynamic range of over 106 dB.
Download Datasheet Product Details
Microwave Backhaul Radio Links
3.6 Gbps Terragraph-Certified Backhaul Radio from 57 to 66 GHz
Microwave Backhaul Radio Links  from Cambium Networks

The cnWave V3000 from Cambium Networks is a Backhaul Radio that operates from 57 to 66 GHz. It provides easy, fast, and cost-effective wireless gigabit connectivity for edge access and/or high-capacity backhaul for edge access solutions at a significantly lower TCO than fiber infrastructure. The radio is certified for Facebook Terragraph and is highly efficient at handling high-density deployments in cities and suburban areas.
Download Datasheet Product Details
Antenna
5G-NR and GNSS Screw Mount Antenna from 617 to 5925 MHz
Antenna  from Maxtena

The MEA-5GG-SM from Maxtena is a 2-in-1 (5G-NR and GNSS) Antenna that operates from 617 to 5925 MHz. This antenna has two ports, one for 5G-NR Sub-6 GHz and the other for GPS/GLONASS/QZSS/Galileo frequencies. For 5G-NR, it provides a peak gain of 0.6 dB with an efficiency of up to 20.7% and has a VSWR of less than 3.3:1.
Download Datasheet Product Details
GNSS Anti-Jamming Solution
GPS Anti-Jam Solution for SWaP-C Constrained Military Applications
GNSS Anti-Jamming Solution  from Mayflower Communications

The NavGuard® 420 from Mayflower Communications is a High Integrity Global Navigation System (HI-GAINS) GPS Anti-Jam Solution. It leverages operationally proven MAGNA GPS Anti-Jam solutions which have been integrated by multiple US Military and Government Agency platforms. This 4-channel anti-jamming solution utilizes a fully integrated CRPA antenna with integrated AJ electronics.
Download Datasheet Product Details
Base Station Antenna
8-Port Panel Antenna from 690 - 960 / 1710 - 2690 MHz
Base Station Antenna  from Radio Frequency Systems

The APXVB3L26B-C-I20 from RFS World is an 8-Port Panel Antenna that operates from 690 to 960 MHz (2 ports) and 1710 to 2690 MHz (6 ports). In the lower band (690 – 960 MHz), it provides a gain of 17 dB and has a VSWR of 1.5:1. It has an azimuth beamwidth (3 dB) from 67.3° to 69.3°, a vertical beamwidth (3 dB) from 6.9° to 7.8° and allows an electrical downtilt from 2 to 11°.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, application notes, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]