1. everything RF
  2. RF Newsletters
more
PREV 21 Sept, 2022 NEXT

New RF and Microwave Products this Week

21 Sept, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 21 Sept, 2022
 
Sponsored by Rohde & Schwarz
 
 
New RF and Microwave Products this Week
Front End Module
Dual-Channel SiGe Receiver FEM from 3.3 to 4.2 GHz for 5G Applications
Front End Module  from NXP Semiconductors

The BTS7202U from NXP Semiconductors is a Receiver Front-End Module that operates from 3.3 to 4.2 GHz. It has 2 independent receive channels each with a low noise amplifier (LNA). The gain can be set to two different levels: 36.5 dB (high gain mode) and 19 dB (low gain mode) – with fast switching between the two modes.
Download Datasheet Product Details
Power Sensor
USB/Ethernet Smart Power Sensor from 10 MHz to 8 GHz
Power Sensor  from Mini Circuits

The PWR-8PW-RC from Mini-Circuits is a Smart Power Sensor that operates from 10 MHz to 8 GHz. This power sensor has a sampling rate of 20 Msps and a dynamic range from -60 dBm to + 20 dBm with a measurement resolution of 0.01 dB. It has a duty cycle of up to 99.9% and a rise/fall time of 50 ns. This sensor supports modulated, pulsed, and CW signal types and has a 10 MHz internal modulation bandwidth.
Download Datasheet Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzer from 1 Hz to 26.5 GHz
RF Spectrum Analyzer  from Tektronix, Inc.

The RSA5126B from Tektronix is a Real-Time Spectrum Analyzer that operates from 1 Hz to 26.5 GHz. It has a real-time acquisition bandwidth of 25/40/85/125/165 MHz and a minimum event duration of 2.7 µs (@ 165 MHz BW) for 100% POI at 100% amplitude. This RTSA uses the patented DPX® spectrum processing engine to provide live analysis of transient events to spectrum analyzers.
Download Datasheet Product Details
RF Inductor
Ferrite Wire wound Chip Inductors from 20 to 3300 nH
RF Inductor  from Coilcraft

The 0402DF Series are wirewound chip inductors available in twenty five inductance values ranging from 20 nH to 3300 nH. They are developed for use in cellular applications, as a filter element in bandstop and low pass filter and as a one pole filter or RF choke in cellular bands. This series has a SRF ranging from 50 MHz to 2950 MHz.
Download Datasheet Product Details
GNSS Anti-Jamming Solution
GPS L1/L2 Band Anti-Jam/Anti-Spoofing Systems for Airborne Platforms
GNSS Anti-Jamming Solution  from BAE Systems

The DIGAR™ from BAE Systems are Advanced GPS Anti-Jamming/Spoofing Systems for airborne platforms. They support up to 16 simultaneous steered beams to provide superior jamming immunity in the most challenging environments. These systems provide simultaneous L1/L2 band protection and support Y-Code and M-Code anti-jamming.
Download Datasheet Product Details
RF Variable Attenuator
63 dB Bi-Directional Switched Bit Attenuator 400 to 1400 MHz
RF Variable Attenuator  from Quantic PMI (Planar Monolithics)

The SBA-400M1400M-63DB-6B-SFF from Quantic PMI is a Bi-Directional Switched Bit Attenuator that operates from 400 to 1400 MHz. It provides an attenuation range from 0 to 63 dB with a step size of 1 dB and can change the attenuation value in less than 80 ns. This 6-bit attenuator can handle an input power of up to 25 dBm, has an insertion loss of less than 6 dB and a video leakage of -55 dBm.
Download Datasheet Product Details
Sponsored by Rohde & Schwarz
Mobile network infrastructure
Mobile network infrastructure testing from design to production
Create the base for cellular communication with Rohde & Schwarz! Discover the wide T&M portfolio, covering full 5G bandwidth and frequencies, an extensive range of features and application software to address new communication standards and much more. Click here to learn more.
TCXO
26 MHz CMOS TCXO for Emergency Beacon Applications
TCXO  from Dynamic Engineers

The TCXO5300BT-CS-26MHz-A from Dynamic Engineers is a TCXO with an operating frequency of 26 MHz. It provides a CMOS output with a phase noise of -155 dBc/Hz @100KHz offset and has frequency stability of ±0.2 ppm over its operating temperature range from -40°C to +55°C. The oscillator requires a DC supply of 3.3 V and consumes a steady current of less than 3.2 mA.
Download Datasheet Product Details
RF Cable Assembly
12-inch 2.92 mm to SMPM Waterproof Cable Assembly from DC to 50 GHz
RF Cable Assembly  from SV Microwave

The 7015-1101 from SV Microwave is a Waterproof Cable Assembly that operates from DC to 50 GHz. It can handle a dielectric voltage of 750 VRMS and provides shielding effectiveness of more than 100 dB. This cable assembly has a diameter of 0.085 inches and can withstand 500 mating cycles. It measures 12-inch in length and has 2.92 mm (male) and SMPM-female connectors.
Download Datasheet Product Details
RF Cable Assembly
Vapor-Sealed Cable Assemblies for Aerospace Applications up to 40 GHz
RF Cable Assembly  from W. L. Gore & Associates

The GORE-FLIGHT from W. L. Gore & Associates are Microwave Assemblies that operate up to 40 GHz. These rugged assemblies have been designed for airborne electronic surveillance/counter measures, radar warning systems, navigation/communication systems, and electronic/signal intelligence applications.
Download Datasheet Product Details
Microwave Generator
6 kW GaN Solid-State Microwave Generator from 2.4 to 2.5 GHz
Microwave Generator  from RFHIC

The RIU256K0-40TG from RFHIC is a Solid-State Microwave Generator that operates from 2.4 to 2.5 GHz. It delivers a CW output power of up to 6 kW with an efficiency of 55% and has an optional Pulsed operating mode. The generator is built using RFHIC’s cutting-edge gallium-nitride (GaN) on SiC HEMTs providing excellent thermal stability and power.
Download Datasheet Product Details
RF Amplifier
100 W Solid-State Power Amplifier from 6 to 10 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2053A-1LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 6 to 10 GHz. It delivers a saturated output power of 100 W with a gain of more than 50 dB. This Class A/AB linear amplifier has spurious levels of less than -60 dBc and harmonics of -20 dBc.
Download Datasheet Product Details
RF & Microwave Circulator
Triple Junction Cryogenic Circulator from 4.3 to 4.9 GHz
RF & Microwave Circulator  from Low Noise Factory

The LNF-CICICIC4.3_4.9A from Low Noise Factory is a Cryogenic Triple Junction Circulator that operates from 4.3 to 4.9 GHz. It has an insertion loss of 0.4 dB (at 5 K) and provides 70 dB of isolation. This circulator has been designed from the ground up to meet the strict requirements of ultra-low temperature physics research.
Download Datasheet Product Details
Sponsored by Rohde & Schwarz
O-RAN
Opening virtualized networks with O-RAN demands suitable test and measurement solutions
Ensure the performance of O-RAN equipment and networks from design and conformance to production and end-to-end-testing with industry-leading test solutions from Rohde & Schwarz. Click here to learn more.
Switch Matrix
8x8 Non-Blocking Switch Matrix Assembly from 5 to 1218 MHz
Switch Matrix  from JFW Industries

The 75MS-052 from JFW Industries is an 8x8 Non-Blocking Switch Matrix Assembly that operates from 5 to 1218 MHz. It has bi-directional ports with a switching speed of 10 ms and provides more than 70 dB of isolation between inputs/outputs. This 75-ohm switch matrix can handle an input power of 20 dBm and has an insertion loss of less than 16.5 dB.
Download Datasheet Product Details
RF Amplifier
Low Noise Amplifier from 10.7 to 12.8 GHz
RF Amplifier  from AmpliTech

The APTW5-10701280-45K10-WR75-D6 from Amplitech is a Low Noise Amplifier that operates from 10.7 to 12.8 GHz. It provides a high gain of 42 dB (flatness of ± 0.5 dB) with a noise figure of less than 0.63 dB and has a noise temperature of 45 K. This LNA is fabricated using state-of-the-art GaAs pHEMT technology. It has been developed for SATCOM applications, such as for military or civil satellite downlinks, and test equipment.
Download Datasheet Product Details
Anechoic Chamber
RF Shielded Chambers for Testing Devices up to 18 GHz
Anechoic Chamber  from RF Electronics

The HDRF-CHM Series from RF Electronics are RF Shielded Chambers that are designed for large area WLAN, multiple client/multiple AP wireless devices testing from 10 kHz to 18 GHz. They have thick RF absorbing foam that deadens standing waves and reflections and provide high isolation to deliver an accurate performance. The chambers use Non-combustible Pyramidal / Wedge / Flat (Multilayer) Absorbers.
Download Datasheet Product Details
Bi-Directional Coupler
6 dB Bi-directional Coupler from 130 to 520 MHz
Bi-Directional Coupler  from Werbel Microwave

The C-5352-06 from Werbel Microwave is a Bi-directional Coupler that operates from 130 to 520 MHz. This 6 dB coupler has a directivity of 25 dB and an insertion loss of less than 2.2 dB. It can handle a CW input power of up to 60 W and reverse power of 3 W. The coupler is available in a module that measures 5.54 x 2.00 x 1.00 inches with N-type (female) connectors and is suitable for UHF, VHF & TETRA applications.
Download Datasheet Product Details
Signal Generator
10 MHz to 40 GHz, Phase Coherent, Multi-Channel RF Synthesizers
Signal Generator  from Holzworth Instrumentation

The HSX Series are broadband, phase coherent frequency sources that are available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz and 40 GHz. They have industry leading phase noise and spectral purity performance coupled with a highly accurate dynamic range from -110 to 20 dBm.
Download Datasheet Product Details
Block Up Converter
Q/V-Band Block-Up Converter from 47.2 to 51.4 GHz
Block Up Converter  from Jersey Microwave

The QVBUC-472514-2005-ODU from Jersey Microwave is a Block-Up Converter that converts an input frequency from 1450 – 2450 MHz to an output frequency (RF) from 47.2 – 51.4 GHz. It has 4 independent inputs to allow 4 separate L-Band inputs to be up converted and then combined and amplified to cover 1 wideband output (custom bands are supported).
Download Datasheet Product Details
RF Over Fiber Module
RF-over-Fiber Tx/Rx Link Modules from 30 MHz to 3 GHz
RF Over Fiber Module  from Optical Zonu

The OZ52x Series from Optical Zonu are RF-over-Fiber Links that operate from 30 MHz to 3 GHz. They consist of individual linear (analog) transmitter (Tx) and receiver (Rx) modules to create an analog over fiber one-way unidirectional link. They support RF transport in situations where transport distance or flexibility of cabling may prohibit the use of coaxial cables.
Download Datasheet Product Details
In Series RF Adapter
1.0 mm (F) to 1.0 mm (F) Hermetically-Sealed Adapter from DC to 110 GHz
In Series RF Adapter  from ERAVANT

The SCT-1F1F-UB-B-V from ERAVANT is a 1.0 mm (F) to 1.0 mm (F) Adapter that operates from DC to 110 GHz. This 50-ohm adapter has an insertion loss of 2 dB, a return loss of 13 dB, and an operating temperature range from -55°C to +125°C. It has stainless steel housing with gold plating and beryllium copper as the center contact material.
Download Datasheet Product Details
Front End Module
Multi-Band Front End Module for 3G/4G/5G Mobile Devices
Front End Module  from Skyworks Solutions

The Sky5® SKY58105-11 from Skyworks is a Mid-Band (MB) and High-Band (HB) Front-End Module that supports 3G/4G/5G mobile devices. It has separate 3G/4G/5G PA blocks operating in the mid-bands and high-bands, a silicon controller with an MIPI® RFFE® interface, RF band switches, MB and HB antenna switches, bi-directional couplers, and integrated filters.
Download Datasheet Product Details
Microwave Backhaul Radio Links
380 Mbps 4x4 MIMO Backhaul Radio from 5.150 to 5.925 GHz
Microwave Backhaul Radio Links  from Proxim

The Edge 1025 from Proxim is an Backhaul Radio that operates from 5.150 to 5.925 GHz. It has an integrated dual-polarity antenna that provides a gain of 15 dBi. This radio supports the OFDM/BPSK-QAM256 modulation technique with channel sizes of 20 MHz and 40 MHz (license upgrade to 80 MHz). It delivers a throughput of 380 Mbps in the 4x4 MIMO mode (requires an external antenna).
Download Datasheet Product Details
RF Duplexer
Cavity Duplex Filters from 138 - 156 / 152 - 175 MHz
RF Duplexer  from Amphenol Procom

The DPF 2/55 from Amphenol Procom are Cavity Duplex Filters with passbands from 138 – 156 MHz (Low Band) and 152 – 175 MHz (High Band). They are designed for duplex radio transceivers where the Tx and Rx operate on several channels, i.e., within a certain port bandwidth. These filters can handle an input power of up to 50 W and have an insertion loss of less than 1.6 dB.
Download Datasheet Product Details
Power Divider
50 W Power Splitters from 138 to 960 MHz for Public Safety Applications
Power Divider  from Sinclair Technologies

The DPSL240 Series from Sinclair are 2/3/4-Way RF Power Splitters that operate from 138 to 960 MHz. They can handle an average input power of 50 W and a peak input power of up to 200 W. These splitters provide more than 17 dB of isolation and have an insertion loss of less than 7 dB. They cover all public safety bands such as VHF, UHF, and 700/800/900 MHz and deliver outstanding electrical performance for optimal reception and clear voice over the network.
Download Datasheet Product Details
Base Station Antenna
10-Port Base Station Sector Antenna from 694 to 960 / 1695 to 2690 MHz
Base Station Antenna  from Kaelus

The P6BPMU01 from Kaelus is a 10-Port Base Station Sector Antenna that operates from 694 to 960 MHz (2 ports) and 1695 to 2690 MHz (8 ports). This ±45° cross-polarized antenna is based on Kaelus’ Innovative slotted disc technology and supports 2x2 MIMO on low band and 4x4 MIMO on mid-band. In the low band, it provides a gain of 16.1 dBi and has a VSWR of less than 1.5:1.
Download Datasheet Product Details
RFID Tag
Semi-Passive NFC/RAIN RFID Temperature Logger Tag
RFID Tag  from CAEN RFID

The qLog (RT0012) from CAEN RFID is a semi-passive NFC/RAIN RFID Temperature Logger Tag that monitors temperature. It combines a high-resolution sensor, a large memory size, and the standard NFC/RAIN RFID interfaces to realize effective track and trace solutions for the cold chain. The RAIN RFID interface is ideal for reading temperature data or alarms from a distance allowing automated checkpoints on conveyors or through dock doors.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]