1. everything RF
  2. RF Newsletters
more
PREV 28 Sep, 2022 NEXT

New RF and Microwave Products this Week

28 Sep, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 28 Sep, 2022
 
Sponsored by Equipnet
 
 
New RF and Microwave Products this Week
Vector Network Analyzer
Portable 1-Port Vector Network Analyzer from 85 MHz to 14 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The R140B from Copper Mountain Technologies is a 1-Port Vector Network Analyzer that operates from 85 MHz to 14 GHz. It supports linear, log and segment sweeps with up to 100,001 measurement points per sweep and a measurement time of 170 µs per point. This VNA has a dynamic range of 112 dB (85 – 4.8 GHz) and a directivity of 42 dB.
Download Datasheet Product Details
RF Spectrum Recording and Playback System
Remote Spectrum Receiver with I/Q Recorder from 9 kHz to 18 GHz
RF Spectrum Recording and Playback System  from CRFS

The RFeye SenS Remote from CRFS is a Remote Spectrum Receiver with I/Q Recorder that operates from 9 kHz to 18 GHz. It uses a powerful COTS processor for secure rack-mounted recording and can be positioned in fixed, unmanned locations such as on a mast or tower. The weatherproof receiver heads can stream full rate 100 MHz IBW data down an armored fiber optic cable (up to 100 meters long) to a rack-mounted server and storage media, housed in a building or secure environmental enclosure.
Download Datasheet Product Details
RF Spectrum Analyzer
Reduce CAPEX and Increase Efficiency in RF Drive Tests
RF Spectrum Analyzer  from ThinkRF

The thinkRF R5750 Real-Time Spectrum Analyzer with GNSS includes an embedded GPS receiver for measuring time and location data for each measurement point. The analyzer can record up to 25 measurements per second for incredibly detailed data for coverage mapping, network performance analysis, and RF interference hunting applications.
Download Datasheet Product Details
Power Divider
6 Way Power Divider from 2 to 5 GHz
Power Divider  from American Microwave Corporation

The PDV-6W01 from American Microwave Corporation is a 6-Way Power Divider that operates from 2 to 5 GHz. It can handle an average power of up to 1 W, has an insertion loss of less than 2 dB and provides more than 16 dB isolation. The power divider has a phase imbalance of 5 degrees and an amplitude imbalance of 0.6 dB. When used as a combiner this device can handle up to 4 W of power at each port.
Download Datasheet Product Details
Power Divider
16 Way Wilkinson Power Divider from 0.5 to 8 GHz
Power Divider  from MECA

The 816-2-4.250-M01 from MECA is a 16-Way Wilkinson Power Divider that operates from 0.5 to 8 GHz. It can handle an input power of 30 W, has an insertion loss of less than 6.3 dB, and provides more than 17 dB of isolation. The power divider has an amplitude balance of 1.3 dB and a phase balance of less than 20°. It is available in a module with SMA-female connectors and is suitable for 5G and Wi-Fi 6 applications.
Download Datasheet Product Details
Dual Directional Coupler
13 dB Dual-Directional Coupler from 1 to 65 GHz
Dual Directional Coupler  from KRYTAR

The 501065013 from Krytar is a Dual-Directional Coupler that operates from 1 to 65 GHz. This 13 dB coupler provides a directivity of more than 7 dB and has an insertion loss of less than 6.5 dB. The coupler can handle an average input power of 20 W and a peak input power of 3 kW. It has a stripline design and uses two back-to-back couplers in the same package which allows monitoring of forward and reflected power.
Download Datasheet Product Details
Sponsored by Equipnet
Equipnet
Upcoming Auction: Electronic & RF Testing Equipment Formally Owned by a Leader in 4G LTE Technology
Online auction with bidding on October 4, 2022. Catalog includes signal & spectrum analyzers, networking test sets, oscilloscopes, communication testers, power supply and more. Includes to OEMs - National Instruments, Tektronix, Keysight, Rohde and Schwarz, Agilent and others. Click here to learn more.
Frequency Multiplier
E-Band Active 6x Frequency Multiplier from 60 to 90 GHz
Frequency Multiplier  from AT Microwave

The AT-AM6-6090-17L from AT Microwave is a 6x Frequency Multiplier that multiplies an input frequency from 10 - 15 GHz to an output frequency from 60 - 90 GHz. It has integrated input and output buffers to provide high output power at a low drive level. This multiplier is available in a module that measures 60 x 30 x 20 mm with an SMA-female input connector and a WR-12 waveguide output interface. It is ideal for a wide range of applications including E-band communication, test equipment, radar systems and RF-over-fiber applications.
Download Datasheet Product Details
RF Transistor
700 W GaN HEMT from 0.9 to 1.4 GHz for Avionics Application
RF Transistor  from Ampleon

The CLL3H0914L-700 from Ampleon is a GaN RF Power Transistor that operates from 0.9 to 1.4 GHz. It delivers an output power of 700 W with a power gain of 17 dB and has a drain efficiency of more than 58%. The transistor is based on GaN-SiC HEMT technology and offers excellent efficiency, thermal resistance, and ruggedness suitable for short and long-pulse applications. It requires a DC supply of 50 V.
Download Datasheet Product Details
RF Switch
SPDT Solid-State Reflective Switch from 960 to 1300 MHz
RF Switch  from JFW Industries

The 50S-1832 from JFW Industries is an SPDT Solid-State Reflective Switch that operates from 960 to 1300 MHz. It can handle up to 200 W of average (cold switch) and 1000 W of peak input power with a 35-microsecond pulse width. The switch has an insertion loss of less than 0.75 dB and a VSWR of under 1.3:1 while providing more than 40 dB of isolation.
Download Datasheet Product Details
RF Amplifier
1 kW GaN Solid-State Power Amplifier from 1 to 2.5 GHz
RF Amplifier  from Ophir RF

The 5258 from OPHIR RF is a Solid-State Power Amplifier that operates from 1000 to 2500 MHz. It delivers a saturated output power of 1000 W with a small signal gain of more than 60 dB. This Class A amplifier uses Gallium Nitride (GaN) technology to provide excellent output power, VSWR tolerance, and a wide dynamic range. It uses advanced devices and components to achieve high efficiency and reliability and supports CW/AM/FM/PM/Pulse input signal formats.
Download Datasheet Product Details
RF Amplifier
250 W Multi-Purpose Solid-State Power Amplifier from 1 to 6 GHz
RF Amplifier  from AR RF/Microwave Instrumentation

The 250S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier (SSPA) that operates from 1 to 6 GHz. It delivers a saturated output power of more than 250 W with small-signal gain of 61 dB. The amplifier has a Class A design, making it suitable for EMC test applications where continued operation into high VSWR loads including open and short circuits is required.
Download Datasheet Product Details
RF Amplifier
1 kW Pulsed Solid-State Power Amplifier from 18 to 26.5 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP4065P-1KW from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 26.5 GHz. It delivers a pulsed output power of 1000 W with a power gain of more than 60 dB. This amplifier has a pulse width of up to 100 µS and a maximum duty cycle of 5%. It is equipped with built-in protection circuit and provides extensive monitoring parameters for forwarding/reflected power in Watts & dBm for unprecedented reliability and ruggedness.
Download Datasheet Product Details
Sponsored by Equipnet
 
 
RF Inductor
AEC Q200-Qualified Air Core Inductors from 2.5 nH to 43 nH
RF Inductor  from Coilcraft

The Mini Spring™ AxxT/BxxT Series from Coilcraft are Air Core Inductors with inductance values from 2.5 nH to 43 nH. These inductors have high Q factors and very tight inductance tolerances making them suitable for narrowband RF amplifier matching and tuning applications. They do not use a magnetic core which results in high Q factors and low losses in high-frequency applications.
Download Datasheet Product Details
Band Pass Filter
MMIC Band Pass Filter from 7 to 9.6 GHz
Band Pass Filter  from AmpliTech

The AGM-009 from AmpliTech is an MMIC Band Pass Filter with a passband from 7 to 9.6 GHz. It can handle a CW input power of 20 dBm and has an insertion loss of 2.2 dB in the passband. The filter provides over 30 dB of rejection above and below the passband. It is suitable for use in communication systems, point-to-point radio, fiber optics, test equipment, and wideband military & space applications.
Download Datasheet Product Details
Band Pass Filter
Bandpass Filter with Passband from 4400 to 4990 MHz
Band Pass Filter  from NuWaves RF Solutions

The 04BPCV-4695-SFSF-M01 from NuWaves RF Solutions is a Bandpass Filter with a passband from 4400 to 4990 MHz. It can handle an input power of 35 W, has a passband insertion loss of less than 0.8 dB, and provides a rejection of 40 dB above and below the passband. This filter is available in a lightweight, module that measures 1.54 x 0.67 x 0.66 inches and has SMA-female connectors.
Download Datasheet Product Details
Tunable Filter
Digitally Tunable Band-Pass Filter from 1.25 to 2.6 GHz
Tunable Filter  from Analog Devices

The ADMV8526 from Analog Devices is a Digitally Tunable Band-Pass Filter with a center frequency from 1.25 to 2.6 GHz. It has a 3 dB bandwidth of 9% and supports 8-bit (256 states) tuning using an interpolation technique. This filter can handle an RF input power of 24 dBm and has an insertion loss of 4 dB. It can be used as a smaller alternative to large, switched filter banks and discrete component-based tunable filters.
Download Datasheet Product Details
In Series RF Adapter
1.0 mm Male to Male Adapter from DC to 110 GHz
In Series RF Adapter  from SV Microwave

The 1139-6022 from SV Microwave is a 1.0 mm Male to Male Adapter that operates from DC to 110 GHz. It has an insertion loss of less than of 0.75 dB and a maximum VSWR of 1.5:1. This 50-ohm adapter is available in a stainless-steel package that measures 5.99 x 12.63 mm with Beryllium Copper contacts and threaded coupling.
Download Datasheet Product Details
RF Cable Assembly
Rugged Low-Loss Cable Assemblies for Military/Commercial Applications
RF Cable Assembly  from ConductRF

The POWeRUN WSA84 Series from ConductRF are RF Cable Assemblies that are designed for military and commercial applications. These cable assemblies have phase stability of ±8° and amplitude stability of ±0.5 dB (@18 GHz). They have can handle an input power of up to 345 W, have a cable loss of less than 0.22 dB/ft, and a VSWR of 1.35:1 (@18 GHz).
Download Datasheet Product Details
Software
Electromagnetic Analysis Tool for Predicting Radar Cross Section
Software  from Remcom

XGtd from Remcom is a Ray-Based EM Simulation Software for assessing the effects of a vehicle or vessel on antenna radiation, predicting coupling between antennas and predicting radar cross section (RCS). It incorporates techniques including Geometric Optics (GO), the Uniform Theory of Diffraction (UTD), Physical Optics (PO), and the Method of Equivalent Currents (MEC).
Download Datasheet Product Details
GNSS Module
High-Stability L1/L5 Band GNSS Timing Receiver Module
GNSS Module  from FURUNO Electric Co., Ltd.

The GT-100 from Furuno is a Multi-GNSS Timing Receiver Module that supports L1/L5 band reception. It delivers three outputs, including 1 pulse per second (1PPS) synchronized with UTC as well as user-programmable frequencies. The outputs can be set as required to 10 MHz, 2.048 MHz, 19.2 MHz, etc., commonly used in a variety of wireless communications systems.
Download Datasheet Product Details
Software Defined Radio
VHF/UHF Software Defined Radio from 30 MHz to 1.8 GHz for Airborne Applications
Software Defined Radio  from Collins Aerospace

The TruNet™ AR-1500 from Collins Aerospace is an Airborne Software Defined Radio that operates in the VHF/UHF bands from 30 MHz to 1.8 GHz. It supports 5 kHz, 8.33 kHz, 12.5 kHz, 25 kHz, 1.2 MHz, 5 MHz, 10 MHz, 30 MHz, and software-definable channel bandwidths. This radio provides secure communication and is interoperable with Collins Aerospace and non-Collins Aerospace VHF/UHF radio systems for cost savings.
Download Datasheet Product Details
Radar Sensor
X-Band 4D AESA Radar for Air/Surface Surveillance with 180 Km Range
Radar Sensor  from Thales

The NS50 from Thales is a 4D Active Electronically Scanned Array (AESA) Surveillance Radar that operates at X-Band frequencies. It provides highly accurate 4D target information required for rapid acquisition by Fire Control Systems, for fire control of short-range “fire and forget” Surface-to-Air-Missile Systems, and for fire control of ship-borne artillery against surface targets.
Download Datasheet Product Details
Data Link
MANET Radio Transceivers from 225 MHz to 6 GHz for Airborne Applications
Data Link  from BERTEN

The P6000 Series from Berten are MANET Radio Transceivers that operate from 225 MHz to 6 GHz. They use the proprietary COFDM waveform and deliver a data rate of up to 120 Mbps. These transceivers operate in FDMA & TDMA multiple access modes and support scalable mesh & MANET networking protocols. They support encrypted communications and are internally synchronized to eliminate the need for GPS.
Download Datasheet Product Details
Base Station Antenna
36-Port Dual-Band Multibeam MIMO Antenna from 698 to 2690 MHz
Base Station Antenna  from Galtronics USA, Inc

The GP6436-07695 from Galtronics is a 36-Port Dual-Band Multibeam Antenna that operates from 698 – 896/1695 – 2690 MHz. It is specifically designed to provide optimal performance for environments such as high-capacity stadiums, venues, and other special events. This ±45° dual-slant polarized antenna provides a gain of up to 21.7 dBi and has a VSWR of less than 1.5:1.
Download Datasheet Product Details
Antenna
Sub-6 GHz Railway Rooftop Antennas for Cellular/Wi-Fi/GNSS Applications
Antenna  from HUBER+SUHNER

The SENCITY® TRAM from Huber+Suhner are Railway Rooftop Antennas for Sub-6 GHz Cellular, Wi-Fi and GNSS applications. They operate from 380 MHz to 6 GHz, support 5G/Wi-Fi 6E and have an embedded GNSS antenna with an integrated low-noise amplifier. These antennas provide up to nine radiating elements in one single compact housing, offering support for 4x4 cellular, 4x4 Wi-Fi, and dual-band GNSS options.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews, upcoming events and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]