1. everything RF
  2. RF Newsletters
more
PREV 5 Oct, 2022 NEXT

New RF and Microwave Products this Week

5 Oct, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 5 Oct, 2022
 
Sponsored by Signal Hound
 
 
New RF and Microwave Products this Week
RF Amplifier
Cascadable MMIC Gain Block from 1.4 to 7.1 GHz for 4G/5G Wireless Infra
RF Amplifier  from CML Microcircuits

The CMX90G302 from CML Microcircuits is a Cascadable MMIC Gain Block that operates from 1.4 to 7.1 GHz. It provides a small signal gain of more than 14.8 dB, has a noise figure of 1.9 dB, and a P1dB of 11.5 dBm. This gain block has a positive gain slope of 2 dB across the band, eliminating the need for equalization and compensating for increasing system losses with frequency.
Download Datasheet Product Details
RF Switch
UltraCMOS® SP4T Reflective Switch Die from 9 kHz to 67 GHz
RF Switch  from pSemi, A Murata Company

The PE42545 from pSemi is an SP4T Switch that operates from 9 kHz to 67 GHz. This switch is manufactured on pSemi’s UltraCMOS® process, a patented variation of silicon-on-insulator (SOI) technology. It has an insertion loss of 2.2 dB (@45 GHz), port-to-port isolation of 39 dB, and a switching time of 60 ns. The switch is available as a flip-chip die.
Download Datasheet Product Details
RF Spectrum Analyzer
Real-time Spectrum Analyzer from 100 kHz to 43.5 GHz
RF Spectrum Analyzer  from Signal Hound

The SM435C from Signal Hound is a Real-time Spectrum Analyzer that operates from 100 kHz to 43.5 GHz. It has a dynamic range of 110 dB, a sweep speed of 1 THz/sec at 30kHz RBW (using Nuttall windowing), and an SSB phase noise of -138 dBc/Hz@100 kHz offset. This RTSA is designed for remotely-located accurate RF data analysis at the lowest cost possible and includes a 10 Gigabit Ethernet SFP+ port, enabling it to communicate with a PC over long distances using a fiber optic cable.
Download Datasheet Product Details
Signal Generator
Microwave Signal Generators from 9 kHz to 13.6/20 GHz
Signal Generator  from SIGLENT

The SSG5000A Series from SIGLENT are Signal Generators that operate from 9 kHz to 13.6/20 GHz. They have a frequency resolution of 0.01 Hz and a phase noise of -120 dBc/Hz @ 1 GHz, 20 kHz offset. These generators support AM/FM/PM modulation, pulse modulation, pulse sequence generation, power meter control and other functions.
Download Datasheet Product Details
RF Spectrum Analyzer
Real-Time & Continuous Spectrum Intelligence Platform
RF Spectrum Analyzer  from thinkRF

The Spectrum eXperience Management (SXM) System from thinkRF is a real-time wireless infrastructure monitoring / intelligence platform. It provides continuous monitoring of all major 4G and 5G parameters with immediate notification of any new, changed or discontinued deployments in an area. SXM comprises of powerful thinkRF sensors (SXM nodes) to collect RF spectrum data, a cloud to store data with maximum cybersecurity and an insightful software (SXM API) that provides advanced analytics to users.
Download Datasheet Product Details
GNSS Simulator
High Performance, Cost-effective, Easy-to-use GNSS Simulator
GNSS Simulator  from Orolia

The GSG-7 from Orolia is a GNSS Simulator with advanced simulation capabilities available in a compact form factor at a competitive price. It features an internal RF combiner and provides high-end performance with a 1000 Hz simulation iteration rate, high dynamics, real-time synchronization, Hardware-in-the-Loop (HIL) integration, and simulation of all-in-view satellite signals.
Download Datasheet Product Details
Sponsored by Signal Hound
SM435C, network capable mmWave spectrum analyzer
Available now! The SM435C, network capable mmWave spectrum analyzer
The SM435C is a high-performance spectrum analyzer/monitoring receiver with 5G and Ka band analysis with 160 MHz continuous streaming I/Q over 10GbE SFP+, enabling long distance PC communication using a fiber optic cable. Designed for remotely located accurate RF data analysis at the lowest cost possible. Click here to learn more.
RF Cable Assembly
40 GHz Multicoax Cable Assemblies
RF Cable Assembly  from HUBER+SUHNER

The MXP40 Series from Huber+Suhner is a state-of-the-art multi-coax solution for applications up to 40 GHz. They are available in a 1x8 or 2x8 ganged channel array with a 4 mm (0.157 inches) pitch center-to-center and convenient slide-on mounting. These assemblies are available with Suhner-K (2.92 mm) interfaces and can handle 500 mating cycles. They are available with four standard cable lengths - 152 mm (6 inches), 229 mm (9 inches), 305 mm (12 inches) and 610 mm (24 inches).
Download Datasheet Product Details
RF Amplifier
6 kW Rack-Mount GaN Transmitter from 5.4 to 5.9 GHz
RF Amplifier  from RFHIC

The RRK54596K0-780 from RFHIC is a Solid-State RF Transmitter that operates in the C-Band from 5.4 to 5.9 GHz. It delivers a pulsed output power of more than 6000 W (LFM signal) with 78 dB of gain and has a VSWR of less than 2:1. This transmitter is designed using RFHIC’s state-of-the-art GaN-on-SiC HEMT technology that ensures excellent thermal stability and high breakdown voltage.
Download Datasheet Product Details
RF Inductor
Miniature Chip Inductors from 22 to 51 nH
RF Inductor  from Coilcraft

The 0201HL Series from Coilcraft are Ceramic Chip Inductors with inductance values from 22 to 51 nH. These inductors have twice the Q factor when compared to inductors of the same size based on thin-film technology. They have a Self-Resonance Frequency (SRF) from 3.25 to 4.35 GHz and a DC resistance of less than 1.85 Ohms.
Download Datasheet Product Details
RF Mixer
Surface-Mount mmWave Double Balanced Mixer from 8 to 32 GHz
RF Mixer  from Marki Microwave

The MM1A-0832HPSM from Marki Microwave is a Double Balanced Mixer with an RF/LO frequency from 8 to 32 GHz and an IF frequency from DC to 12 GHz. The mixer has an integrated broadband LO driver amplifier that allows for operation with LO powers as low as -6 dBm while retaining exceptional conversion loss and linearity.
Download Datasheet Product Details
RF Switch
SP2T Reflective Switch from 2 to 4 GHz
RF Switch  from Quantic PMI (Planar Monolithics)

The P2T-2G4G-80-55-R-SFF from Quantic PMI is an SP2T Reflective Switch that operates from 2 to 4 GHz. It has a switching speed of less than 50 ns and provides more than of 80 dB of isolation. The switch can handle an input power of up to 30 dBm and has an insertion loss of less than 1.3 dB. It requires a DC supply of +5/-5 V and consumes less than 100 mA of current.
Download Datasheet Product Details
Software Defined Radio
SOSA-Aligned Multi-Channel SDR Tuner from 400 MHz to 18 GHz
Software Defined Radio  from Epiq Solutions

The Sidekiq™ VPX410 from Epiq Solutions is a Multi-Channel Software Defined Radio (SDR) Tuner that operates from 400 MHz to 18 GHz with an instantaneous bandwidth up to 1 GHz. It combines four RF receive tuners with one RF transmit tuner to access more RF spectrum and supports both phase-coherent operation and independently tunable operation.
Download Datasheet Product Details
Sponsored by Signal Hound
 
 
RF Spectrum Analyzer
Rack-Mount, Software Defined Spectrum Analyzer from 900 to 2200 MHz
RF Spectrum Analyzer  from Avcom

The EVO-RSA-2290A from Avcom is a Spectrum Analyzer that operates from 900 to 2200 MHz. This Software Defined Radio (SDR) based Rack-Mount Analyzer is available with up to 8-inputs. It uses FPGA, DSP and high-performance processors and is based on hybrid swept-FFT technology which provides an extended frequency range and higher resolution.
Download Datasheet Product Details
RF Module
Satellite Communication Module for Battery Powered IoT Systems
RF Module  from Astrocast

The Astronode S from Astrocast is a Satellite Communication Module for highly integrated, battery-powered IoT systems. This low-power module enables bi-directional satellite communication on a single battery for a period of up to 10 years. The Astrocast nanosatellite LEO network is designed to enable low latency global transmission of messages with additional unicast and multicast downlink capability.
Download Datasheet Product Details
Vector Network Analyzer Extender
E-Band VNA Frequency Extender Set from 60 to 90 GHz
Vector Network Analyzer Extender  from ERAVANT

The STO-1220305-CMC-S1 from Eravant is an E-Band VNA Frequency Extender Set that operates from 60 to 90 GHz. It supports input frequencies from 10 to 15 GHz and consists of a Tx/Rx pair which are designed to achieve full 2-port, S-parameter testing. This frequency extender can achieve a dynamic range up to 120 dB for certain passive products that require high rejection, isolation, and return loss testing such as directional couplers, orthomode transducers, and filters.
Download Datasheet Product Details
RF Transceiver
E-band Transceiver Module from 71 to 86 GHz
RF Transceiver  from Filtronic

The Morpheus II from Filtronic is an E-band RF Transceiver that provides a turn-key solution for carrier-grade mobile XHaul applications. This transceiver has integrated Tx/Rx modules that operate from 71-76 / 81-86 GHz and features a diplexer that can be interfaced with an antenna. It contains all transmit and receive functions necessary for the RF section of an E-band link and provides a simple connection to a high data rate full-duplex modem.
Download Datasheet Product Details
RF & Microwave Isolator
Single Junction Cryogenic Isolator from 2.8 to 4.3 GHz
RF & Microwave Isolator  from Low Noise Factory

The LNF-ISC2.8_4.3A from Low Noise Factory is a Cryogenic Single Junction Isolator that operates from 2.8 to 4.3 GHz. At 77K, it has an insertion loss of 0.2 dB and provides 20 dB of isolation. This isolator has an operating temperature range from 0.01 K to 100 K and has been designed to meet the strict requirements of ultra-low temperature physics research.
Download Datasheet Product Details
OCXO
Oven Controlled Crystal Oscillator (OCXO) from 80 to 120 MHz
OCXO  from AXTAL

The AXIOM238 from AXTAL is an Oven Controlled Crystal Oscillator (OCXO) that operates from 80 to 120 MHz. It provides a sine wave output with an amplitude of +10 dBm and has frequency stability of ±500 ppb. This OCXO has spurious levels of -80 dBc, maximum harmonics of -30 dBc, and phase noise of -160 dBc/Hz@1 kHz offset.
Download Datasheet Product Details
RF Transistor
400 W, GaN on SiC HEMT from DC to 2.9 GHz
RF Transistor  from Gallium Semiconductor

The GD400 from Gallium Semiconductor is a GaN-on-SiC HEMT that operates from DC to 2.9 GHz. It delivers a saturated output power of 400 W with a maximum drain efficiency of 64% and is suitable for CW, pulsed and linear applications. This transistor requires a DC supply of 28/50 V and consumes a quiescent drain current of 319 mA.
Download Datasheet Product Details
Low Noise Block
Low Noise Block from 19.2 to 21.2 GHz for SATCOM Applications
Low Noise Block  from TTI

The TTI-LNB-KA-1921-A from TTi is a Low Noise Block (LNB) that converts an input frequency of 19.2 – 21.2 GHz (Ka-Band) to an output frequency from 1 – 2 GHz (L-Band). It has an 18.2/19.2 GHz local oscillator. This LNB provides a gain of 60 dB and has a noise figure of less than 1.5 dB. It has spurious levels of -60 dBc (@P1dB) and a VSWR of better than 1.6:1.
Download Datasheet Product Details
RF Cable Assembly
120 GHz Coaxial Cable with Enhanced 1.0 mm Connector
RF Cable Assembly  from Junkosha

The MWX002 from Junkosha is a 110 GHz cable that can be used up to 120 GHz when used with the optional Enhanced 1.0 mm connector. The cable is matched to 50 ohms has a propagation delay of 4.2 ns, has a wavelength reduction rate of 79% and a VSWR of 1.197:1 with a loss of 14.5 dB/meter at 120 GHz.
Download Datasheet Product Details
Front End Module
Multiband Multi-constellation Front-End Module
Front End Module  from Taoglas

The TFM.110A from Taoglas is a Multiband GNSS Front-End Module that covers L1/L2/L5 bands for high-precision applications. It consists of two fully-integrated cascaded low noise amplifiers (LNA) and pre-filters (SAW/LNA/SAW/LNA topology) in the signal path to prevent unwanted out-of-band interference from overdriving the GNSS LNAs or receiver.
Download Datasheet Product Details
Beamforming IC
24 to 30 GHz Dual Polarization Quad 4x2 Beamformer IC for 5G
Beamforming IC  from Anokiwave

The AWMF-0221 from Anokiwave is a highly integrated silicon RF beamforming IC (BFIC) that operates from 24.25 to 29.5 GHz (n258, n257, and n261 3GPP bands). It is built on Anokiwave's quad-channel, dual-polarization CMOS platform. It supports 4 dual-polarization or 8 single-polarization antenna configurations and operates in Tx/Rx half duplex modes.
Download Datasheet Product Details
RF Repeaters
28 GHz mmWave 5G Outdoor Repeater with Rx Range up to 10 Km
RF Repeaters  from Wilson Electronics

The Network 257 (460069) from Wilson Electronics is a 28 GHz 5G mmWave Outdoor Repeater that covers the 5G-NR n257 and n261 bands. It provides an end-to-end gain of up to 100 dB, has a noise figure of 2.5 dB, and latency of less than 40 ns. This repeater uses cutting-edge dielectric waveguide antenna technology to efficiently extend 5G coverage to multiple, users simultaneously in a wide area.
Download Datasheet Product Details
Antenna
3-in-1 Sub-6 GHz 5G, Cellular, Wi-Fi, and GNSS Combination Antenna
Antenna  from PCTEL

The 710671 from PCTEL is a 3-in-1 Sub-6 GHz GNSS, Cellular, and Wi-Fi Combination Antenna. For cellular and Wi-Fi operation, it has vertical polarization with a peak gain of 5 dBi and a VSWR of less than 3:1. For GNSS operation, it requires a DC supply from 2.4 to 6 V and consumes 10 mA of current. It has RHCP polarization, provides an active gain of 30 dB, and has a noise figure of less than 2.5 dB with a pre-filter.
Download Datasheet Product Details
Antenna
4x4 MIMO Directional Antenna from 1800 to 4200 MHz
Antenna  from Parsec Technologies, Inc.

The Greyhound from Parsec is a 4x4 MIMO Directional Antenna that operates from 1800 to 4200 MHz. This ±45° polarized antenna provides a peak gain of 15 dBi. It has a beamwidth from 24° to 40°, radiation efficiency of up to 80%, and a front-to-back ratio of more than 8 dB. The antenna has 4 separate arrays of elements to support 4×4 MIMO with a high gain directional pattern and excellent port-to-port isolation across the mid-band.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, upcoming events, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]