1. everything RF
  2. RF Newsletters
more
PREV 7 January, 2015 NEXT

Most Popular RF Amplifiers in 2014

Jan 7 - everything RF Newsletter
 
everything RF
Date: Jan 7, 2015
 
New & Improved everything RF
 
 
 
Most Popular Amplifiers in 2014
RF Amplifier
0.05 to 4 GHz, Ultra Linear Low Noise Monolithic Amplifier

RF Amplifier from Mini Circuits

The PGA-103from Mini Circuits is a 0.05 to 4 GHz Low Noise Amplifier. It has a P1dB up to 23.2 dBm with a gain of 26.5 dB and a noise figure of less than 1.5 dB. This LNA has a high dynamic range without external matching components and is available in a SOT-89 package.
 
Download Datasheet | Similar Products
 
RF Amplifier
450 to 2000 MHz Low Noise Amplifier for Wearable Applications

RF Amplifier from Parsec Technologies, Inc.

The PT683-3 from Parsec Technologies is a GaAs Low Noise Amplifier which operates from 450 to 2000 MHz. It provides a gain of 24 dB, an OIP3 of 32.85 dBm and a noise figure of 0.82 dB. This GaAs based amplifier has an active bias-enable pin that provides external feedback for maximum design flexibility. It is ideally suited for GSM/CDMA based Femto/Picocell, telematics, and wearable applications.
 
Download Datasheet | Similar Products
 
RF Amplifier
18 to 40 GHz Low Noise Amplifier for Ka Band Applications

RF Amplifier from CTT Inc

The ALO/400-5515 from CTT Inc is an 18 to 40 GHz Low Noise Amplifier for Ka Band Applications. It has a gain of 15 dB, noise figure of less than 5.5 dB and a P1dB of 6 dBm. The amplifier is available in a module with Sma, 2.9 mm or K Type connectors.
 
Download Datasheet | Similar Products
 
RF Amplifier
GaN 1.2 GHz Power Doubler Amplifier Supporting new DOCSIS 3.1 cable specification

RF Amplifier from RFMD

The RFCM3316 is a power doubler amplifier in a multi-chip module to support the requirements of the new data over cable service interface specification (DOCSIS) 3.1. based on RFMDs GaN and allows cable operators and MSOs to easily upgrade existing CATV infrastructure to meet the power amplifier requirements of the new DOCSIS 3.1 standard, increasing effective downstream data rates from 160 Megabits per second (Mb/s) to 10 Gigabits per second (Gbit/s), and upstream data rates from 120 Mb/s to 1 Gbit/s when compared to DOCSIS 3.0.
 
Download Datasheet | Similar Products
 
RF Amplifier
0.4 to 2.7 GHz SMT Linear Power Amplifier for Wireless / Communication Applications

RF Amplifier from Skyworks

The SKY65162-70LF is a linear power amplifier that operates from 400 to 2700 MHz. It is ideal for UHF televisions, TETRA radios, PCS, 3G, 4G handsets and infrastructure. The amplifier has a P1dB of 29.5 dBm, Noise figure of less than 3.6 dB and a gain of 24 dB. It is available in a compact SOT-89 package.
 
Download Datasheet | Similar Products
 
RF Amplifier
7.5 to 11.5 GHz Power Amplifier for X Band Applications

RF Amplifier from Triquint

The TriQuint TGA2517-GSG is a power amplifier that operates from 7.5 to 11.5 GHz with an gain of 30 dB and an output power of 14 W. The amplifier has been designed on TriQuint standard 0.35um gate pHEMT process. The TGA2517-GSG features low loss groundsignal- ground (GSG) RF transitions designed to interface with a coplanar waveguide multilayer board.
 
Download Datasheet | Similar Products
 
RF Amplifier
50 to 1000 MHz, 20.8 dB Gain Block and CATV Amplifier

RF Amplifier from Linear Technology

The LTC6431-20 is a gain block amplifier that operates from 20 to 1400 MHz. It provides a gain of 20.8 dB with a low noise figure of 2.6 dB and high linearity. The amplifier is matched to 50 Ohms at the input/output and requires a 5V supply for operation. It provides a 46.2 dBm OIP3.
 
Download Datasheet | Similar Products
 
RF Amplifier
High Power Amplifier Systems with Frequencies from 20 MHz up to 1000 MHz

RF Amplifier from Empower RF

The BBS2E4AUT (SKU 2162) is a high power amplifier that operates from 20 MHz to 1 GHz. It is ideal for CW, modulated, and pulse applications. The amplifier provides 1000 Watts of CW power and 500 watts at P1dB. It has a gain of 63 dB with 3.5 dB flatness. The BBS2E4AUT is available in a rack mount configuration with forced air-cooling. It requires a 180-260 VAC single phase voltage or can be ordered optionally with a three phase AC supply.
 
Download Datasheet | Similar Products
 
RF Amplifier
500 Watt Travelling Wave Tube Amplifier from 1 to 2.5 GHz

RF Amplifier from AR Modular RF

The Model 500T1G2 is a TWT (Travelling Wave Tube Amplifier) Amplifier that operates from 1 to 2.5 GHz. It provides a minimum of 500 W of power with a gain of 57 dB and can be used to amplify signals with AM, FM and Pulse modulation.
 
Download Datasheet | Similar Products
 
RF Amplifier
750 Watts, Outdoor TWT Power Amplifier for Satellite Communications

RF Amplifier from Communications & Power Industries

The T07DO is a 750 Watt TWT Amplifier for Satellite Communication applications. This TWT amplifier operates from 17.3 to 18.4 GHz and is available in a rugged and compact weatherproof package. It has a high gain and operates on 240 V of AC Supply.
 
Download Datasheet | Similar Products
 
RF Amplifier
Multi-Channel 50 Watt Amplifier from 20 MHz to 2500 MHz

RF Amplifier from Ophir RF

The Model 7002 is a 50 W multi-channel broadband system that covers the 20 to 2500 MHz frequency range. The power amplifier provides up to 20 W of average power, 50 W of saturated power and has a gain of 40 dB with a gain flatness of 2 dB.
 
Download Datasheet | Similar Products
 
RF Amplifier
High Power, E-Band Power Amplifier from 71 to 86 GHz for Long Distance Point-to-Point Wireless Backhaul

RF Amplifier from MACOM

The MAAP-011106 is a E-Band power amplifier that has been developed for small cell wireless backhaul applications that enable datarates of 1 Gbps and higher to accommodate surging data demand, particularly in densely populated metro environments. The amplifier operates from 71 to 86 GHz to deliver a saturated power of 25.5 dBm, which is extremely high for an amplifier operating in the E-Band.
 
Download Datasheet | Similar Products
 
RF Amplifier
35 W, GaN Power Amplifier from 5.5 to 8.5 GHz

RF Amplifier from Cree

The CMPA5585025F from CREE is a GaN HEMT based power amplifier which operates between 5.5 and 8.5 GHz. It is ideal for point to point radio, communication and SATCOM applications. It provides 35 W of typical saturated power with a small signal gain of 24 dB and 30% of power added efficiency.
 
Download Datasheet | Similar Products
 
RF Amplifier
2 to 20 GHz, Driver Amplifier Die Ideal for Military, Space and Communications Systems

RF Amplifier from Custom MMIC

The CMD187 is a wideband GaAs MMIC driver amplifier. At 10 GHz the device delivers greater than 22 dB of gain with a corresponding output 1 dB compression point of 14 dBm and an output IP3 of 29 dBm.
 
Download Datasheet | Similar Products
 
RF Amplifier
6 to 18 GHz Low Noise Amplifier with an integrated 1 W Limter for protection

RF Amplifier from Miteq

The JS3-06001800-20-10P-L is a 6 to 18 GHz Low Noise Amplifier from Miteq with an integrated 1 Watt limiter to provide protection. The amplifier provides a P1dB of 10 dBm, a gain of more than 23 dB with a noise figure less than 2 dB. It requires a 5 V supply and draws 150 ma of current.
 
Download Datasheet | Similar Products
 
RF Amplifier
1 to 18 GHz Low Noise Amplifier with 30 dB Gain and 22 dBm P1dB

RF Amplifier from Planar Monolithics Industries

The PE2-30-1R018R0-4R5-22-12-SFF-1 is a low noise amplifier that operates from 1 to 18 GHz. The amplifier has a gain of 30 dB, P1dB of 22 dBm and a noise figure of less than 4.5 dB through the band. It requires a 12-15 V supply to operate while drawing 500 ma of current. It is available with Sma female connectors.
 
Download Datasheet | Similar Products
 
RF Amplifier
0.5 to 200 MHz, Cascadable Power, Low Noise Amplifier

RF Amplifier from Teledyne Cougar

The ARJ109 from Teledyne Cougar is a cascadable low noise, power amplifier which operates from 0.5 to 200 MHz. It provides 28.5 dBm of output power with a small signal gain of 10 dB and a noise figure of less than 5.7 dB. It can be used in military, commercial and aerospace applications.
 
Download Datasheet | Similar Products
 
RF Amplifier
27 to 31 GHz Gallium Nitride HEMT for SATCOM and Point to Point Digital Radio Applications

RF Amplifier from Northrop Grumman

The APN228 is a GaN HEMT broadband amplifier from Northrop Grumman for use in SatCom Terminals and Point to Point digital radio applications. It operates from 27 to 31 GHz with a linear gain of 19.5 dB and a Psat of 41.2 dBm. The amplifier requires a 28 V DC supply and draws a 1.2 A current.
 
Download Datasheet | Similar Products
 
RF Amplifier
6 to 18 GHz, 10 Watt GaN MMIC Power Amplifier

RF Amplifier from Hittite

The HMC7149 is a 10 Watt Gallium Nitride (GaN) MMIC Power Amplifier which operates between 6 and 18 GHz. It provides 20 dB of small signal gain, 40 dBm of saturated output power, and 39.5 dBm output IP3 at 28 dBm output power per tone. The HMC7149 draws 680 ma current from a 28V DC supply.
 
Download Datasheet | Similar Products
 
RF Amplifier
700 MHz to 2700 MHz Gallium Nitride Power Amplifier

RF Amplifier from RFHIC

The RWP17050-10 is a wideband power amplifier that operates from 700 MHz to 2700 MHz. It provides an output power of 50 W with a 37 dB gain. This power amplifier module has been designed for broadcasting, telecommunications, medical and other markets.
 
Download Datasheet | Similar Products
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.